The first run of a Xiaomi smart coffee machine or sub-brands like Scishare and Deerma can be challenging because of the abundance of sensors and digital interfaces. Many users mistakenly believe that just pressing a button is enough, but a number of preparatory steps are needed to properly run the self-diagnosis and warm-up system. Ignoring the initial setup can lead to pump errors or incorrect determination of water levels.
In this guide, we will take you through all the steps from unpacking and removing transport locks to synchronizing with the Mi Home ecosystem, and learn how to properly activate the primary wash mode of the system, which is a critical step to remove factory dust and stabilize the boiler temperature, not only ensuring the purity of the first drink, but also prolonging the life of the heating element.
We’ll look at the nuances of working with touch panels, which often require more confident pressing when you first turn on, and also analyze typical situations when the device does not respond to commands. Understanding the logic of smart coffee making systems will help you avoid false alarms and quickly master the functionality of your new kitchen gadget.
Preparation of the device for the first launch
Before looking for the power button, make sure the coffee machine is ready to go. Xiaomi devices often come with additional security elements inside the water tank or in the drop tray that block the sensors from working. Carefully inspect all available cavities and remove any foam inserts or plastic bags.
The next step is to install a water tank. It is important to use only clean, filtered or bottled water, since hard water can quickly disable the heating element and create scale in narrow supply channels. Pour water to the MAX mark, but do not transfuse above the specified level to avoid liquid entering the electronic components.
⚠️ Warning: Never turn on a coffee machine without a water-filled tank installed and installed. Dry running of the pump will cause it to instantly fail and not subject to warranty repair.
Once the tank is installed, close the lid tightly. Some models have magnetic sensors that will prevent the device from turning on if the tank lid or drop-collection tray is not fully installed. Make sure that all removable parts fall into place with a characteristic click.
Search for the power button and activation of power
The location of the power button depends on the specific model of your coffee machine. Most modern Scishare and Xiaomi devices use touch controls located on the top panel or on the front of the case. Look for the Power icon, which is often combined with a status indicator.
To activate, you need to press and hold the button for 2-3 seconds. A short touch may not be enough, as it is done to protect against accidental activation by children or pets. Once activated successfully, you will hear the characteristic sound of the pump and see lights lit up.
- 🔘 Single short press can switch modes but not turn on the device.
- 🔘 Long press (3 seconds) activates the main mode of operation.
- 🔘 Double-pressing is often used to enter setup or reset mode.
If the lights catch fire but go out after a few seconds, check the connection to the power grid. The cable must be inserted tightly to the end. In rare cases, a voltage check is required, since power surges can block the start of the electronics.
The primary system washing process
Once turned on, the machine will go into preheating mode, a mandatory procedure during which the device warms up the boiler and internal highways, and the display can display a flashing temperature indicator or progress bar.
Once the operating temperature is reached, the system will propose a primary flushing, which is necessary to remove the residues of the factory lubrication, dust and stabilize the temperature regime, insert a liquid collection tank (a cup or jug) under the water supply nozzle.
⚠️ Warning: The first portion of water that passes through the system is not intended for drinking, it contains technical contaminants and must be disposed of.
To start the flushing process, you usually need to press the volume selection button or a special combination described in the instructions for your model. The device will pump water through the system several times, the process may be accompanied by pump noise and steam output.
☑️ Checklist of the primary launch
Connection to Mi Home and Wi-Fi
One of the key features of Xiaomi’s technology is the ability to remotely control, which requires downloading the Mi Home app (or Xiaomi Home) on your smartphone. Make sure your phone is connected to a 2.4GHz Wi-Fi network, as most smart devices do not support the 5GHz standard.
Turn on Bluetooth on your smartphone and open the app. Click on the plus in the top right to add a new device. The app will automatically start scanning the available gadgets. When an image of your coffee machine appears on the screen, click Connect.
When pairing, you may need to enter a password for your Wi-Fi network, follow the instructions on the screen until the Wi-Fi indicator on the coffee machine is on a straight light, signaling a successful connection, and you can now start making coffee from another room.
| Parameter | Requirement | Note |
|---|---|---|
| Wi-Fi frequency | 2.4 GHz | 5GHz network not supported |
| Protocol | IEEE 802.11 b/g/n | Standard protocol |
| Distance | Up to 10 meters. | For initial setup |
| smartphone OS | Android 5.0+ / iOS 10+ | A stable version is required. |
If you fail to connect the first time, try restarting your router or bringing your phone closer to the coffee machine, sometimes resetting the Wi-Fi module on the device itself by pressing the appropriate button for a long time.
Adjustment of the parameters of coffee preparation
Once connected and flushed, you can start adjusting your taste preferences, and smart coffee machines can flexibly adjust your strength, temperature and serving volume, and these settings can be changed through the control panel or the app.
To change the strength of the coffee, you use adjusting the time of the water spill through the coffee tablet or the degree of grinding (if the model has a built-in coffee grinder). A longer strait or finer grinding will make the drink richer, but can add bitterness.
- ☕ Fortress: regulated by water or extraction time.
- 🌡️ Temperature: a choice from the 85 ranges°C, 90°C, 95°C.
- 💧 Volume: portion settings from 30 ml (espresso) to 200 ml (American).
Save your preferences as an in-app profile, which will allow you to make your perfect coffee at the touch of a button or with a voice command through a smart speaker, if it is integrated into your ecosystem.
Diagnostics and solution (FAQ)
In the process of operation, you may encounter a situation where the coffee machine flashes an indicator or emits an audible signal, which is the normal operation of the self-diagnosis system, which reports maintenance or an error.
The most common problem is flashing the water indicator, which means that the level sensor can't see the water. Even if the tank is full, try to take it out and re-insert it, wiggling slightly to activate the supply valve, and also check if the water intake hole is clogged.
⚠️ Warning: If the indicator flashes red constantly and the device is buzzing, immediately disconnect it from the network.
Another common scenario is that the machine itself monitors the amount of water it has passed and reminds it to clean up scale, and ignoring this requirement will lead to lower productivity and worse taste.