Modern kitchens are unthinkable without smart appliances, and Xiaomi is one of the leaders here thanks to its innovative solutions. When you just unpack a new aerogrill, there is a natural desire to start operating it immediately. However, the correct initial activation of the device is not just a formality, but an important step that affects the durability of the device and the quality of cooking in the future. In this guide, we will analyze all the nuances so that you can start your gadget without errors.
Many users make the mistake of ignoring the preparatory steps, which can cause unpleasant odors or even damage to the non-stick coating. The smart heating system requires certain conditions for the correct calibration of temperature sensors. Before pressing the power button, you need to make sure that the device is installed on a stable, flat surface protected from direct sunlight and heat sources. The first start should always take place without products inside the bowl for the burnout of the factory lubricant.
The inclusion process may vary slightly depending on the model, whether it’s Xiaomi Smart Air Fryer 3.5L or the more powerful Pro 4L. The basics remain similar, but the management interface and available features may vary. Below we’ll look at the sequence of actions that will suit most current brand models, ensuring a safe and efficient start for your new kitchen assistant.
Preparation of the device for the first launch
Before you connect the appliance to the power grid, you need to conduct a thorough visual inspection and preparation of components. Remove the work basket and make sure that the heating element is free of any protective films, packaging materials or foreign objects. Often inside the bowl are instructions or warranty coupons that must be removed to avoid ignition when the heater is first turned on.
After removing all foreign objects, it is recommended to wash the removable parts with warm water with a soft detergent.Although the device is new, there may be industrial dust or residues of technical lubrication on the surface.Make sure to thoroughly wipe the inner surface and grille with a soft sponge, avoiding the use of abrasive materials that can damage the ceramic or Teflon coating.
An important step is to ensure proper airflow around the enclosure: Install the aerogrill at least 20 centimeters from the walls and other kitchen appliances. Ventilation holes located at the back and top of the device must remain free to efficiently remove hot air. This is critical to the operation of the cooling system and prevent electronics from overheating during intensive cooking.
⚠️ Warning: Never cover a working air grill with towels or other items, even if you think it is working too quietly.Blocking ventilation can cause internal components to automatically shut down or damage.
Make sure the power cord is fully straightened and free of clamps. Connect directly to the grounded socket, without using cheap extension cords or tees that may not be able to withstand the high power of the appliance.
☑️ Pre-insertion check
Control interface and main buttons
Understanding the logic of the control panel will make it much easier to operate, and depending on the model, the interface can be represented by a touch screen or a combination of mechanical buttons with a touchscreen. LED-In the Smart Air Fryer series, a digital screen displaying the current temperature and remaining cooking time is central to the model.
The main on/off button is usually located at the top of the panel or highlighted in contrasting color. A short press activates the device to put it in standby mode, and prolonged holding can perform the function of resetting or forced off. Nearby are temperature and time regulators that allow you to set the necessary parameters for a particular dish.
To navigate the menu, you often use plus and minus touch arrows or a rotary mechanism (in some versions). Pressing the mode select button (Menu) cyclically switches between pre-installed programs such as French fries, Steak, Shrimp or Baking. Each mode already has optimally tuned heating algorithms, which eliminates the need for manual settings.
- 🔘 Power button – responsible for activating and deactivating the device.
- 🌡️ Temperature regulator - allows you to change the heating in the range from 40 to 200 degrees.
- ⏱️ Timer – sets the duration of cooking with an accuracy of up to a minute.
- 📱 Connection button – necessary to pair with a smartphone via Wi-Fi.
Special attention should be paid to the indicator panel, which reports the status of operation. Flashing icons can indicate the heating process, the completion of a cycle or an error in the system. Understanding the color indication will help quickly diagnose the condition of the device without reference to the instructions. For example, red often signals the heater's operation, and green - about readiness or standby.
Hidden button functions
Step-by-step instruction for the inclusion of aerogrill
The first-on process requires consistent action to properly initialize the system. First, make sure the basket is tightly inserted into the case before the characteristic click. The security sensor located inside the compartment will not allow heating to start if the bowl is not installed to the end or skewed.
Press the power button on the control panel. The screen should light up, and the device will emit a short beep to confirm a successful start. By default, the aerogrill often goes to Standby mode, which displays the current temperature or the last settings used, at which point the heating has not yet begun.
Select the desired cooking mode or set_manual_ settings. Use the buttons «+» and "-" to adjust the temperature. For the first test run (calcination), it is recommended to set the temperature. 200 degrees and time 10-15 After setting the settings, press the confirmation button (often indicated as Start/Stop).
⚠️ Attention: During the first switch on, a slight smell of plastic or lubricant may appear. This is normal for new technology, but the room must be well ventilated.
The heating process will start, as indicated by a flashing temperature indicator or animation on the display. The internal fan will start to work, ensuring the circulation of hot air. Do not open the basket in the first minutes of operation, so as not to disrupt the thermoregulation and calibration of the sensors.
Set up through the Mi Home app
One of the key features of Xiaomi’s ecosystem is the ability to remotely manage through the Mi Home app, which extends the functionality of the device by providing access to hundreds of cloud recipes, fine-tuning temperatures and creating automation. To get started, download the app to your smartphone and register an account.
Turn on Bluetooth and geolocation on your smartphone, then click the add-on button in the app. The aerogrill needs to be put into pairing mode: usually you need to press the time and temperature buttons at the same time or hold the Wi-Fi button for a long time. Your grill will appear in the list of available devices, which you need to select to complete the setup.
Once connected to your home Wi-Fi network, you can see the status of the device in real time, the app allows you to start cooking remotely, receive notifications about the completion of the process and track energy consumption, and Mi Home often features new cooking profiles that update the firmware devices.
| Function | On the device panel. | In the appendix Mi Home |
|---|---|---|
| Choice of regime | Basic presets | More than 100 recipes |
| Accuracy of temperature | Step 5-10°C | Step 1°C |
| Timer. | Up to 24 hours. | Up to 24 hours + delayed start |
| Notifications | Sound signal | Push notification on the phone |
It is important to check the “Updates” section of the application periodically. Manufacturers release firmware that improves the algorithms of the fan or adds new features. The current version of the software guarantees stable operation and compatibility with other smart home devices.
💡
Use the “Deferred Start” function in the app to make sure the dish is prepared exactly for your arrival from work, while remaining warm until the time of serving.
Selection of cooking modes and temperatures
Xiaomi aerogril offers a wide range of temperature regimes, making it a versatile tool in the kitchen. Low temperatures (40-80 ° C) are ideal for defrosting foods, drying fruits or yogurt. In this range, air circulation is gentle, which allows you to maintain the structure of products.
The midrange (120-160°C) is used to baking vegetables, fish and reheating ready meals. It's important not to overdry the product, so smart algorithms can periodically change the intensity of the heater. High temperatures (180-200°C) are designed to create a crispy crust on meat, French fries and baking.
When choosing a particular mode, consider the volume of products to be loaded. If the bowl is full, cooking time may increase, and the efficiency of hot air circulation decreases. It is recommended not to fill the basket above the Max mark, if any, or leave a space of 2-3 cm from the upper heating element.
- 🥦 Vegetables mode – optimal for preserving vitamins and texture.
- 🍗 Meat mode - provides deep roasting and reduction of fats.
- 🥐 "Bake" mode - maintains a stable temperature to raise the dough.
- 🌡️ "Warming" mode - quickly returns the serving temperature to the dish.
By experimenting with different settings, you can find the perfect settings for your favorite dishes. Remember the good combinations of time and temperature to play back the results effortlessly in the future. Some models allow you to save custom presets right in the device memory or in the application profile.
💡
Choosing the right temperature is the key to success: low temperatures are dried, high temperatures create a crust, medium temperatures are baked evenly.
Security and possible errors during start-up
Even if you follow all the instructions, there can be situations that require user intervention. If the aerogrill doesn't turn on, check the density of the basket. Often the problem is that the safety contacts do not close due to improper installation of the bowl. Remove and insert it again with moderate force.
The appearance of an error code on the display (for example, E1, E2) usually indicates overheating or sensor malfunction. In the case of overheating, the device will automatically shut down and resume operation only after cooling. Do not try to speed up this process by sending cold air or water to the grill - this can lead to thermal shock and destruction of components.
Regular cleaning is also part of safe operation: the heating element's deposit can cause sparkling or odor, clean the heater with a soft brush only after the device has completely cooled, and use of aggressive chemicals is prohibited, as the fumes can damage electronic components.
⚠️ Warning: If the device makes a loud crack, smokes or smells of burning, immediately disconnect it from the network and contact the service center.
Compliance with the rules of operation will extend the life of your Xiaomi Air Fryer for many years. Smart equipment requires careful attention, but in return gives convenience and health. Keep an eye on the state of the power cord, keep moisture out of the case and use only original accessories when you need to replace parts.