How to install voiceover on the robot vacuum cleaner Xiaomi from the phone: the complete guide

Introduction: why you need voiceover for a robot vacuum cleaner

Xiaomi’s robot vacuum cleaners are not just cleaning devices, but full-fledged assistants in a smart home. However, factory beeps (squeaks and short tunes) are often not informative enough. Voice-over allows the robot to report cleaning status, errors, completion of work or low charge levels with voice, making interaction with the device more intuitive and convenient.

In this article, we will discuss how to install and configure voiceover on the Xiaomi Mi Robot Vacuum robot vacuum cleaner (including Mi Robot Vacuum-Mop 2 Pro, Dreame models). D9, Viomi V3 And there's a smartphone, and it doesn't require root rights or complicated manipulations -- it's just a Mi Home app and a few minutes of time.

For example, not all models support Russian voice acting out of the box, and some firmware can block the installation of third-party voice packets, and we will tell you how to circumvent these restrictions and choose the best settings for your needs.

What Xiaomi models support the installation of voiceover

Not all Xiaomi robot vacuum cleaners can play voice alerts, a feature available for most models based on the Mi Home platform, but with reservations:

• ✅ Mi Robot Vacuum-Mop 2 Pro, Mi Robot Vacuum-Mop 2 Lite – full voice support, including Russian.
• ✅ Dreame D9, Dreame D10 Plus – Supports voice packets but requires manual installation.
• ✅ Viomi V3, Viomi SE — Voice acting is working, but voting is limited.
• ❌ Mi Robot Vacuum 1S, Mi Robot Vacuum 2 – standard sound signals only, voice alerts are not supported.

If your model is not included in the list, check its compatibility in the official Mi Home app.

1. Open the app and select your robot vacuum cleaner.
2. Go to Settings. → Voice alerts.
3. If the item is missing, your model does not support the function.

Preparation: What you will need to install voiceover

Before you start setting up, make sure you have everything you need:

• 📱 Smartphone on Android 6.0+ or iOS 12+ with the Mi Home app installed (version no lower than 6.5.400).
• 🤖 Xiaomi robot vacuum cleaner connected to the same Wi-Fi network as the phone.
• 🔋 Battery charge of the robot at least 50% (during installation of voiceover device should not be turned off).
• 🌐 Stable Internet connection (voice downloaded from Xiaomi servers).

Important: If you are using Dreame or Viomi, you may need an additional DreameHome or Viomi Home app, in which case the installation process will be different (see the corresponding section for more details).

⚠️ Note: If your robot vacuum cleaner was purchased in China (market version) CN), For the installation of voiceovers, you may need to change the region in Mi Home to Russia or Europe.

Step-by-step: installation of voiceover through Mi Home

The process of installing voiceover takes no more than 5 minutes.

1. Open the Mi Home app and select your robot vacuum cleaner from the device list.
2. Go to Settings (cog icon in the upper right corner).
3. Find the Voice Alerts section (or Voice Pack in English).
4. Click Add Voice Pack (Add Voice Pack).
5. Choose the voice language (e.g. Russian) and voice (male/female).
6. Confirm the boot - the robot will start the installation (it will take 1-3 minutes).
7. After completion, restart the robot vacuum cleaner (Reset button in settings).

If there is no voice notification section, it means:

• Your model does not support the function (see the list above).
• Installed outdated firmware (update it through Settings) → Update of the PO).
• The robot is connected to the China region in Mi Home (see the Attention block above).

Setting up voiceover: what alerts can be turned on

Once you have the voice packet installed, you can flexibly configure what events the robot will voice.

1. Go back to the voice alerts section of Mi Home.
2. Select Notification Settings (Notification Settings).
3. Activate the switches next to the desired events.

Available alerts (may vary depending on the model):

• 🔋 Low battery power: robot tells when less than 20% of charge is left.
• 🧹 Start cleaning – voice confirmation of the start of the task.
• ✅ Completion of cleaning – notification of completion of work.
• ⚠️ Error – Reporting getting stuck, falling or other problems.
• 🔄 Back to base - robot says as it returns to dock.
• 🚫 Obstacle – notification of an obstacle encountered (for example, wires on the floor).

Important: Some models (e.g. Dreame) D9) They let you record your own voice messages through the app, and you have to select Castom Alerts and follow the instructions on the screen.

💡

If the robot voices the same event too often (e.g., “obstacle”), reduce sensor sensitivity in the cleaning settings (Settings) → Sensors. → Sensitivity).

Installing voiceovers on Dreame and Viomi: features

The Dreame and Viomi robot vacuum cleaners, while part of Xiaomi’s ecosystem, use their own control apps, and the process of installing voiceovers is nuanced.

For Dreame (D9, D10 Plus and so on.):

1. Install the DreameHome app (available for Android and iOS).
2. Connect the robot to the application and go to Settings → Voice assistant.
3. Select Download Voice Package and wait for the installation to be completed.
4. Enable the necessary alerts in the Alert Management section.

For Viomi (V3, SE etc.):

1. Use the Viomi Home app (or Mi Home if the robot is connected through it).
2. Go to the Device Settings → Voice.
3. Choose the language and voice – only Chinese and English are available (Russian may not be available).
4. Activate the option to Enable voice prompts.

⚠️ Note: DreameHome and Viomi Home applications sometimes have an error that failed to load a voice packet:

• Reconnect the robot to the app.
• Clear the app cache (phone settings) → Annexes → DreameHome → Memory. → Clear the cache).
• Install VPN Singapore or Hong Kong (some voice packs are only available in Asia).

How to Record Your Voice for a Robot Vacuum Cleaner

Some models (e.g. Mi Robot Vacuum-Mop 2 Pro and Dreame) D10 Plus, it supports custom voice alerts, so it makes the interaction with the robot even more personalized:

1. In the Mi Home or DreameHome app, go to Settings → Voice alerts → Castomy messages.
2. Select the event you want to record the voiceover for (e.g., Cleanup Completion).
3. Click Record and say the phrase into the microphone (maximum duration - 5 seconds).
4. Save the recording and sync it with the robot (reboot may be required).

Limitations:

• 🎤 The quality of the recording depends on the microphone of the phone – in a noisy room, the voice may sound fuzzy.
• 📱 Maximum number of custom alerts – 5 pieces (for most models).
• 🔄 Records are stored in the Xiaomi cloud and can be reset after a firmware update.

If your model doesn't support voice recording, you can do a trick: use third-party voice packets from the community, for example, on forums. 4PDA or Xiaomi Community has custom voiceovers with humor or non-standard phrases, installed through Local Files in the robot settings (if the feature is available).

💡

Castom voice alerts make the robot vacuum cleaner unique, but they require a good microphone and a quiet environment when recording. If the recording quality is poor, the robot can play distorted phrases.

Frequent problems and their solutions

Even after a successful voiceover installation, users face challenges, and here are the most common ways to address them:

If none of these things worked, try resetting the robot to the factory settings and resetting the voiceover from scratch.

1. In Mi Home, go to Device Settings → Reset.
2. Confirm the reset (robot will reboot).
3. Connect the device again and install voiceover.

⚠️ Warning: Once reset, the robot will lose all stored room maps, cleaning schedules and custom settings.

FAQ: Answers to popular questions