How to pair Xiaomi remote with a TV, console or air conditioner: all ways

Xiaomi’s smart remotes are not just accessories, but full-fledged control centers in the home, supporting dozens of brands, from Samsung TVs and other devices. LG However, many users face problems when setting up the first setup: the remote does not find the device, the buttons are not working correctly or the connection is constantly broken. In this article, we will discuss all official and alternative methods of mating, as well as how to avoid typical mistakes.

Feature of Xiaomi remotes (for example, Mi Remote Controller or Mi) TV Stick Remote: They use an infrared port (IR) for traditional devices and Bluetooth for smart devices (e.g. Mi Box S or Mi TVs) TV). This means that the connection process can be very different depending on the model. If you're trying to pair a remote with a Xiaomi TV from 2020-2026, you'll probably need a Bluetooth pairing. IR-code.

Before you start, make sure: 1) The remote is charged (the indicator should burn green or flash when you press buttons). 2) The device you want to connect is on and is in standby (for TVs) or pairing (for Mi Box consoles). 3) The smartphone has the application Mi Home (for IR-remotes) or Mi TV Remote (for Bluetooth models).

1. How to pair Xiaomi Bluetooth remote with a TV or Mi Box

Modern TVs Xiaomi Mi TV (series Q2, P1, A2) The boxes and the boxes (Mi Box S, Mi Box) 4S) They use Bluetooth pairing to connect the remotes, and it takes no more than 30 seconds, but it requires you to follow the instructions exactly.

Algorithm of action:

• 📺 Turn on the TV or console and wait for the main screen to load. If it's a new technique, complete the initial setup.
• 🔋 Make sure the remote is charged. Press any button to do this, and the indicator (red or green) should light up).
• 🔄 Activate the pairing mode: For Mi TV: Go to Settings. → Devices → Bluetooth and remotes → Add remote. For Mi Box: log into Settings → Remote & Accessories → Add Remote.
• 🎯 Press and hold the buttons. OK + Back (or Home) + Back for some models) on the remote for 5-7 seconds until the indicator flashes quickly.
• 🔗 Wait for the automatic connection. The TV screen will display a notification, "Remote connected».

If the remote is not detected, try:

• 🔌 Reboot the TV/set-top box (turn off power for 10 seconds).
• 📱 Update the device firmware through Settings → On TV. → Update of the PO.
• 🔄 Reset the remote settings: pinch Menu + Volume+ 10 seconds.

Remote charged (indicator on fire)

TV/Subset-top box on and in standby mode

Bluetooth is enabled on the device (check in settings)

The remote is not more than 1 meter away from the TV.

No interference from other Bluetooth devices (headphones, speakers)-->

⚠️ Note: If you connect the remote to the Mi Box 4S or Mi Box S, make sure the settings are disabled HDMI-CEC (It can conflict with Bluetooth pairing. Path: Settings → Display & Sound → HDMI-CEC → Off.

2. Synchronization IR-Xiaomi remote with household appliances (air conditioning, TV, audio system)

Xiaomi Infrared Remote Controller (e.g. Mi Remote Controller or Mi Smart Home) IR Remote) manages the technology through IR-signals mimicking the original remotes, and you will need the Mi Home app (available for Android and iOS) to set them up).

Step-by-step:

1. Connect the remote to the Mi Home app: Open the app and click «+» (Add device. Select the Remote category and your remote model (e.g. Xiaomi Mi Remote Controller). Follow the instructions on the Bluetooth connection screen.

Set the buttons.

• In the “Button Settings” section, you can reassign functions (for example, make the Volume button appear to be a button).+ It controlled the volume of the sound bar, not the TV).

If the remote does not find your model of technology in the database, try:

• 🔍 Manual Code Search: In Mi Home, select “Another Brand” and manually comb through the codes until the device responds.
• 📲 Update the base. IR-codes in the application: go to the remote settings and click "Update firmware».
• 🌐 Use alternative applications such as BroadLink or IR Universal Remote if the Mi Home doesn’t support your model.

3. Problem Solving: Xiaomi remote doesn't pair or shut down

If the mating process ends in error or the remote periodically loses communication with the device, the reasons can be both software and hardware.

Problem 1: The remote is not defined by the TV/set-top box

• 🔋 Battery discharge - even if the indicator flashes, the charge can be critically low.Plug the remote to charge for 30 minutes.
• 📡 Bluetooth interference – disable other devices (earphones, speakers, smart watches) within a 5-meter radius.
• 🔄 Firmware failure – update the TV/Set-top box software and restart it.
• 🔧 Model incompatibility – check if your TV supports third-party remotes (for example, some Sony Bravia models only work with original remotes).

Problem 2: The remote is pairing, but the buttons are not working

• 🎯 Incorrect Device Profile – In Mi Home, delete your current profile and add it again by selecting a different brand.
• 🔄 Reset the remote settings - pinch Menu + Volume+ for 10 seconds, then repeat the mating.
• 📱 Conflict with other remotes – if you have the original remote, turn it off while you’re testing.

Problem 3: The remote is periodically switched off

• 📶 Weak Bluetooth signal – reduce the distance between the remote and the device (optimally – up to 3 meters).
• 🔋 Energy saving – disable the power saving mode on the TV/set-top box (may break the connection).
• 🔄 Auto-Update - Some Mi firmware TV They have Bluetooth bugs. Check for updates.

Xiaomi TV (Mi TV)

The Mi Box console

Air conditioning (any brand)

Audio system or soundbar

Other-->

⚠️ Note: If you are using the Mi TV Stick with a TV that doesn’t support HDMI-CEC, Some remote functions (such as volume control) may not work. IR-Control for TV via Mi Home, and Bluetooth – only for consoles.

4. Alternative control methods: if standard mating does not work

If none of the methods described helped, do not despair – there are workarounds that will allow you to use the Xiaomi remote even with incompatible technology.

Method 1: Use of universal applications

Apps like BroadLink, IR Universal Remote or ZaZaRemote support more brands than Mi Home:

1. Download and install one of the applications on your smartphone.
2. Connect the Xiaomi remote to the app via Bluetooth.
3. Select the device type and brand from the extended list.
4. Test the teams and keep your work profile.

Method 2: Manual learning IR-code

If your equipment is not recognized automatically, you can “train” the Xiaomi remote with the commands of the original remote:

1. In Mi Home, select Add Device» → «Another brand» → «Manual input».
2. Point Xiaomi’s original remote and remote at each other (IR-port).
3. Press the button on the original remote (like Power), then on the Xiaomi remote.
4. Repeat for all necessary buttons.

Method 3: Connecting through USB-receiver

For some models, the Mi Box (such as the Mi Box 3) can be used. USB-IR Adapter (sold separately) allows you to control the console via an infrared remote if Bluetooth is not working:

• Connect the adapter to USB-port port.
• In the settings of the consoles, select «USB-IR Remote as the main remote.
• Set up. IR-Teams through Mi Home.

💡

If you lost the original air conditioning remote but have a Xiaomi remote, try connecting it via Mi Home by choosing the Midea or Gree brand – their codes are often compatible with other brands.

5. Set up additional Xiaomi remote functions

After successful mating, you can expand the remote capabilities by configuring:

• 🎮 Game mode - to control games on Mi Box (activated in the remote settings).
• 🔊 Voice control – if the remote supports Google Assistant or Alice (e.g. Mi Remote Pro).
• 🔄 Macros – Sequences of commands (e.g., “Evening Cinema”: turn on the TV, start Netflix, turn off the lights).
• 📱 Control from a smartphone – via the Mi Remote app (available for Android).

To adjust the macros:

1. Open Mi Home and select your remote.
2. Go to the Automation or Scenarios section.
3. Click “Create a Macro” and add a sequence of commands (e.g.: turn on the TV). → launch YouTube → volume up to 50%).
4. Save the macro and assign it to one of the remote buttons (for example, F1 or F2).

To activate voice control:

• Make sure the remote supports the microphone (e.g. Mi Remote Pro).
• In the remote settings in Mi Home, enable the option “Voice Assistant”.
• Press the microphone button on the remote and say the command (for example, “Put Disney on”).+»).

💡

Voice control only works with remotes that have a built-in microphone (such as the Mi Remote Pro).

6.How to reset Xiaomi remote to factory settings

If the remote is not working properly or you want to transfer it to another user, do a full reset, which will remove all the paired devices and return the settings to the factory.

Instructions for different models:

• For Bluetooth remotes (Mi) TV Stick Remote, Mi Box Remote: Press the Menu buttons + Back for 10-15 seconds, until the light flashes red quickly. Release the buttons, the remote will reboot.

Mi Remote Pro

):

Xiaomi remotes do not support proprietary protocols (for example, some Bang & Olufsen or Bose models with closed ones). API). In this case, you will have to use the original remote.

FAQ: Frequent questions about pairing Xiaomi remotes