Smart cleaning devices have become an integral part of everyday life, but even the most advanced appliances require regular maintenance. Often users face the need to replace or wash a textile nozzle, but the design of some Xiaomi and Roborock models can confuse the inexperienced owner.
In this article, we will discuss in detail the mechanics of mounting a rag, consider the features of various modifications and answer the question of how to remove a rag from a robot vacuum cleaner Xiaomi without using force. You will learn what types of fixation exist and why it is important to follow the sequence of actions when dismantling the washing platform.
Timely cleaning and proper replacement of consumables directly affect the quality of wet cleaning. Ignoring simple rules of operation can shorten the life of a vibrating platform or lead to unpleasant odor. Let's get to the bottom of this process.
Design features of the platform fastening
Before you start physically impacting the device, you need to understand what type of mount you are dealing with. Xiaomi engineers use several time-tested solutions to fix the detergent, and each has its own characteristics. The main mechanism for holding the water and cloth tank is based on magnetic contacts and mechanical latches.
Most modern models, such as the Xiaomi Vacuum Mop 2 Pro or the Roborock S7, use a magnetic mount system. The platform simply sticks to the bottom of the robot, and electrical contact is provided through special pentacles. You can remove this design with a slight movement of your hand, but it is important to know which places to take, so as not to drop a heavy tank of water.
Older or budget models may have a combined mount, where the magnets are supplemented with plastic guides, in which case mechanical fixation requires little effort to detach. If you feel resistance, don't pull the platform sharply - it may be locked programmatically or has an additional lock.
💡
Always make sure the robot is completely stopped and switched to charging mode before attempting to remove the platform to avoid accidental start of the motors.
Special attention should be paid to contact groups: with frequent removal and installation of the platform, metal contacts may become oxidized or contaminated, and regular visual inspection of this area will help avoid problems with water supply or pump operation in the future.
Preparation for maintenance of the detergent module
Any manipulation of electronics and mechanical components requires pre-prepared workspace. To safely remove the cloth, you will need a smooth, dry surface and possibly a water drain container. Don't try to remove the platform on the weight or above the carpet, as spilled water can damage the flooring.
The first step is always to stop the device. If the robot is in the process of cleaning, send it to base via an app or button on the body. Once the robot vacuum cleaner returns to the dock, make sure it is completely immobilized. This is critical for models with a lifting platform that can move when removed.
- 🛑 Stop the current cleaning task via the Mi Home app or button on the case.
- 💧 Dump the remaining water from the tank if long-term storage or replacement of the cleaning type is planned.
- 🧤 Prepare dry rags to wipe the contacts and the platform itself after removing.
- 🔦 Provide good lighting to the work area to see the condition of the fasteners.
It's also important to check if the robot is stuck in a hard-to-reach place. If the device is stuck under the sofa or in a corner, carefully remove it into an open space. Attempting to remove the platform in cramped conditions often results in scratches on furniture or breakage of the robot's sensors.
Keep in mind personal safety and hygiene. The water in the tank may contain detergents or contaminants, so skin contact is best minimized. If you plan to wash the platform, prepare the sink and cleaners that do not contain aggressive chemicals in advance.
☑️ Preparation for the removal of the platform
Algorithm of removing a magnetic platform
The most common type of attachment in the Xiaomi ecosystem is a magnetic platform, which is intuitively intuitive, but has its own technical nuances, which are not covered in brief instructions, the main rule is that you should not pull by the rag or by the edge of the tank, but by special notches or the body of the platform itself.
Find protrusions or indentations on the back of the robot that are designed to be grabbed by the hand. The Roborock series often has a comfortable plastic tongue. Take a confident grip on it and pull it down and back a little bit, away from the robot. You should feel the characteristic click of the magnets' detachment.
If the platform is not removed, do not use excessive force, perhaps the blocking mechanism is triggered or the residue of water interferes with the effect of suction, a slight sway from side to side will help to destroy the vacuum and free the magnetic lock.
⚠️ Warning: Never pull the platform by the fabric itself or the Velcro! This will cause the textile base to be removed from the plastic, and it will be extremely difficult to restore the mount without the glue.
Once the module is successfully separated from the robot body, place it gently on a flat surface, and now you can start removing the rag itself, which, depending on the model, can be attached to Velcro, clamped with plastic slats or put on like a case on a tank.
What to do if the platform is dry?
Removal of the rag from the tank
Separating the platform from the robot, you get a water tank that's strung over it, and the way it's removed depends on the design of the particular model, and most of the time, you use a system of Velcro Velcros or elastic rubber bands that cover the tank around the perimeter.
For Velcro models, the process is this: find the free angle of the fabric, usually behind or on the side of the tank. Bend the fabric carefully to separate the hooks and hinges of the sticky layer. The movement should be parallel to the surface of the tank so that the adhesive base does not damage.
In tension-powered models (such as some versions of the Xiaomi Mijia), the fabric is pulled over the frame, you need to find clips or elastic loops around the corners, relax the tension by snapping the locks, and remove the textile part. Be careful not to tear the fabric against the sharp edges of the plastic.
| Type of attachment | Models (examples) | Difficulty withdrawal | Risk of damage |
|---|---|---|---|
| Velcros (Velcro) | Roborock S5, S6, Xiaomi Mop | Low. | Medium (basis break) |
| Tension frame | Xiaomi Vacuum Mop 1S | Medium | Low. |
| Magnetic clamps | Roborock S7 MaxV | Low. | Low. |
| Rubber fixers | Budgetary models | Tall. | Tall (tissue gusting) |
Once the rag is removed, make sure to inspect the surface of the tank, which should not be left with pile, hair or scale. The cleanliness of the contact surface ensures that the new or washed rag will lie flat and will effectively moisturize during operation.
Features of models with auto-lift mop
Owners of flagship models such as the Roborock S7 or Xiaomi X10+ face the added complexity of an auto-lift system, which can lock the platform in the top position when stuck or mistaken, making physical access to the mounts difficult.
If the platform is raised and not lowered, the standard effort may not help.The Mi Home app often features a "wipe only" feature, or forced platform lowering. Activate dry cleaning mode so that the robot tries to lift the module and then lower it again, unlocking the mechanism.
In the event of a software failure, where the robot thinks the platform is off but physically hanging, it may need to be rebooted. Turn off the robot with the power button, wait 10 seconds and turn on again. This will restart the lift servos.
⚠️ Warning: Don't try to force a raised platform into your hands! the lifting mechanism has high torque and can damage your fingers or break plastic gears inside the case.
For these models, it's critical to shoot the platform only in a horizontal position. If the robot is inverted or is at an angle, the locking mechanism may not work correctly. Always place the device on a flat floor before maintenance.
Platform care and frequent errors
Regular maintenance of the detergent extends the life of the device, and after each use, remove the cloth, rinse it and dry it, leaving moist cloth on the tank leads to the reproduction of bacteria and the appearance of mold, which is then difficult to odor from the robot filters.
One of the most common mistakes is the use of aggressive chemicals: chlorine or underwear conditioners can destroy the structure of the microfiber and damage the plastic elements of the tank. Use only water or special products for robotic vacuum cleaners.
Also, users often forget to clean magnets and contact areas, dust and moisture create an oxide film that impairs conductivity, wipe contacts with dry cloth once a week, if you notice corrosion, you can carefully use a cotton swab dipped in alcohol, but only after completely turning off the device.
- 🚫 Do not use hot water to wash rags – it destroys the structure of the fibers.
- 🚫 Do not dry the platform in direct sunlight – plastic can deform.
- 🚫 Do not leave water in the tank for storage - this leads to acidification of the pump.
- 🚫 Do not ignore the appearance of rust on the propellers of the platform - they need to be changed in a timely manner.
Compliance with these simple rules will allow your Xiaomi to serve for many years without losing the quality of cleaning. Properly removed and installed cloth is the key to clean floors and no divorce.
💡
The key to a long-term cleaning platform is to dry all components before assembly, never put a wet cloth on a dry tank, and never remove a wet platform robot from the base.