Why Xiaomi Dispenser Soap Isn’t Always the Right Soap – and How to Fix It
Xiaomi Automatic Dispenser (e.g. Mijia Smart Soap Dispenser or Viomi) V3>) They're designed for a liquid soap with a specific viscosity of 1500-2500 mPa·s. The problem is that most of the gels from the store are either too thick (clog the pump) or too liquid (foam leaks spontaneously), as a result of which the device works incorrectly: Gives too little money, “spit” or even refuses to pump.
The solution is simple: to prepare the soap yourself, choosing the perfect consistency for the mechanism of the dispenser. This will not only save the budget (the cost of homemade composition is 5-10 times lower than the store), but also allow you to control the composition – without the need to use the device. SLS, In this article, we will examine 5 proven recipes (including the option for sensitive skin), nuances of mixing and errors that spoil 90% of homemade mixtures.
⚠️ Critical warning: Do not use soap with abrasive particles (scrabs, peels) or oils (coconut, olive) for Xiaomi dispenser. The pump mechanism of Mijia and Viomi models is not designed for hard switching - this will lead to jamming of the piston and breakage in 2-3 weeks.
What soap is suitable for Xiaomi dispenser: the criteria for choosing the basis
Not all soaps can be converted to liquid form for automatic dispenser, but here are the key requirements for the base:
- 🧼 Pieces: It is best to use baby soap (e.g. Johnson's Baby) or household soap (72%) that dissolves well and produces a stable foam. High-oil soap (e.g. Dove or Camay) requires an additional thickener.
🔍 How do you test viscosity without a viscometer? Put 50 ml of finished soap in a measuring glass and flip it over:
- less than 5 seconds → too liquid (needs thickener);
- 5-15 seconds → perfect for Xiaomi;
- 20 seconds → too thick (dilute with water).
Recipe 1: Classic liquid soap made of lump (universal version)
This recipe is suitable for most Xiaomi Dispensers including Mijia Smart Soap Dispenser and Viomi. V3. Base - household or baby soap, diluted to optimal viscosity.
Ingredients:
- 🧼 100g bar soap (72% or baby);
- 💧 500 ml of distilled or boiled water;
- 🍯 1 tsp glycerin (to soften the skin);
- 🌸 5-10 drops of essential oil (optional, for aroma).
Step-by-step:
- Grate the soap on the grater (small side) or cut with a knife into thin shavings.
- Place the shavings in a heat-resistant container and pour 300ml of hot water (not boiling water! Temperature 70-80°C).
- Stir until completely dissolved (you can use a blender at low revs).
- Add the remaining 200 ml of room temperature water, glycerol and essential oil. Stir.
- Let the mixture stand for 12 to 24 hours. If the soap is too thick, add another 50 to 100 ml of water.
⚠️ Warning: If you settle down and you get sediment, strain the soap through gauze or coffee filter, and the crystals of the undissolved soap will clog the dispenser mechanism.
Consistency thicker than water, but flowing freely from the bottle|
No lumps or undissolved particles|
Color uniform (without divorces)|
Smell neutral or pleasant (without chemical hue)|
The temperature of the mixture is room (do not pour hot soap!)
-->
Recipe 2: Hypoallergenic Soap for Sensitive Skin
This option is suitable for families with children or people with atopic dermatitis, there are no aggressive surfactants, and the pH is close to neutral (5.5-6.5).
Ingredients:
- 🧼 50g of fragrance-free baby soap (Johnson's Baby, Uryazh);
- 💧 400 ml of chamomile or series decoction (chilled);
- 🥛 1 tbsp oatmeal (to soften);
- 🍯 1 tsp panthenol (pharmacy 5% solution).
The nuances of preparation:
- Cook the decoction of grass in a water bath for 15 minutes, then strain through a sieve.
- Oatmeal is pre-soaked in 50 ml of warm water for 30 minutes, then add to a soap base.
- Do not use essential oils – they can cause irritation in allergic people.
- Keep the finished soap in the refrigerator for no longer than 2 weeks (due to the natural ingredients).
| Component | Function | The alternative |
|---|---|---|
| Chamomile broth | Relieves inflammation, calms the skin | Calendula or sage broth |
| Oatmeal | Natural thickener, softens the water | Corn starch (1 tsp) |
| panthenoline | Accelerates the healing of microcracks | Aloe vera gel (1 tsp) |
| Baby soap. | The main cleaning component | Soap base for handmade work (pH 5.5) |
💡
If the soap is too liquid, add 1 tsp. xanthan gum (food thickener) E415). Stir the blender to uniformity – it is safe for the dispenser mechanism and does not cause allergies.
Recipe 3: Antibacterial soap with long-lasting effects
This recipe will require soap with triclosan or other antiseptics (such as Safeguard or Dettol), which is important: this formulation is not suitable for daily use - only for periodic disinfection (for example, after street or contact with animals).
Ingredients:
- 🧼 70g antibacterial lump soap;
- 💧 350 ml of water;
- 🧂 1 tsp sea salt (enhances antiseptic effect);
- 🍋 10 drops of tea tree oil (natural antiseptic).
Features of mixing:
- Dissolve the soap in water in a water bath (temperature not higher than 40)°C, otherwise triclosan will collapse).
- Add salt and tea tree oil, mix until the crystals dissolve completely.
- Strain through gauze - the salt may not completely dissolve.
- Before pouring into the dispenser, check for foaming: if the foam is too abundant, add 1 tsp of citric acid to stabilize.
⚠️ Warning: Antibacterial soap with triclosan should not be mixed with iodine or hydrogen peroxide - this neutralizes the antiseptic effect and can cause chemical burns to the skin.
What happens if you pour undiluted antibacterial soap into Xiaomi dispenser?
Recipe 4: Gel soap with aloe and vitamin E (for dry skin)
This recipe is suitable for those who often wash their hands become rough or crack, and it contains moisturizers that compensate for the aggressive effects of surfactants.
Ingredients:
- 🧼 50g clear glycerin soap;
- 💧 200 ml of distilled water;
- 🌱 2 tbsp. l. aloe vera gel (natural, without alcohol);
- 💊 1 capsule of vitamin E;
- 🍯 1 tsp. honey (optional, for additional moisturizing).
Preparation technology:
- Melt glycerin soap in a water bath (it melts at 50-60)°C).
- Add water in small portions, stirring constantly to avoid lumps.
- Enter the aloe gel and the contents of a vitamin E capsule. If you use honey, pre-dissolve it in 1 tbsp. l. of warm water.
- Cool the mixture to room temperature and beat the mixer to gel condition.
🔹 Tip: If the gel is too transparent, add 1-2 drops of food coloring (for example, turmeric for a yellow hue). This will not affect the properties, but visually the soap will look like a store.
Recipe 5: Express recipe made from finished liquid soap (if there is no time)
If you need to urgently fill up the dispenser, and only thick store soap (for example, Dove or Fa) is at hand, it can be adapted for Xiaomi in 10 minutes.
What you need:
- 🧴 100ml thick liquid soap;
- 💧 50–100 ml of warm water;
- 🍋 ½ citric acid (to stabilize the foam).
Instructions:
- Pour the soap into the container and add water in small portions, stirring with a wreath.
- Test the viscosity: If the soap leaks out of the bottle with a jet (does not drip), add another 20-30 ml of water.
- Add the citric acid, stir and let stand for 5 minutes.
- Strain through the strainer - this will remove possible clots.
⚠️ Warning: Do not dilute the soap with hot water - this can cause dissection of the composition. Optimal liquid temperature: 30-35°C.
💡
The citric acid in this recipe has two functions: it reduces pH (which is good for the skin) and prevents the formation of excess foam that can clog the dispenser nozzle.
Top.-5 Mistakes in Xiaomi Soap Mixing (and How to Avoid Them)
Even experienced users sometimes make mistakes that ruin homemade soaps or disable the dispenser.
- Use unfiltered water. Tap water contains calcium and magnesium salts that react with soap to form flakes. Always use distilled or boiled water.
- Overheating of the soap base, above 80.°C soap loses its useful properties, and antiseptics (such as triclosan) decompose. Optimal range: 50-70°C.
- Incorrect proportions of oils: essential oils are added not only for flavor, but also for preservation. Excessing the dosage (more than 10 drops per 500 ml) can cause skin irritation.
- Ignoring the viscosity test. Even if you followed the recipe, always check the consistency before pouring into the dispenser. The thick soap will clog the pump, and the liquid will spontaneously leak out.
- Storage in inappropriate containers: Metal containers oxidize when they come into contact with soap, and poor quality plastics can release toxins. Use glass or food plastic (labeling). PP or PET).
🔹 Lifehack: To see if the soap will clog the dispenser, drop a drop on the napkin. If 5 minutes later there is a greasy spot, the composition is too thick.