How to sync Yandex Station with Xiaomi TV: 3 working methods + error solving

Yandex Stations sync with Xiaomi TV opens up new opportunities for managing multimedia: voice search for movies, volume control without a remote, and even running applications through Alice. However, many users face difficulties in setting up - from lack of sound to problems with connecting over Bluetooth or HDMI ARC. In this article, we will analyze all current synchronization methods (including hidden MIUI TV settings), analyze typical errors and give a checklist for troubleshooting.

Xiaomi’s ecosystem is closed, so standard instructions from Yandex don’t always work. For example, Android TV 11+ (Mi TV Q2 2023 or Redmi Smart Fire TV) requires additional manipulations with HDMI-CEC settings, and older versions (Mi TV 4S) may need a workaround solution via Aux cable. We tested all methods on current firmware in 2026 — the results are summarized in the comparison table below.

Preparation: device compatibility and requirements

Before you start syncing, check the hardware and software compatibility of your devices. Not all Xiaomi models of Yandex Stations and TVs support the same connection protocols.

• 🔹 Yandex Station Max, Mini 2 and Light - support HDMI ARC Bluetooth 5.0, but only Max has optical outputs for older TVs.
• 🔹 Xiaomi TVs on Android TV 9-10 (Like Mi. TV P1) may not recognize HDMI-CEC Stations without manual activation.
• 🔹 Redmi Smart models TV (especially with fire OS) Often block the connection of third-party speakers over Bluetooth – you will need to reset network settings.

Also make sure that:

• 📌 Both devices are connected to the same Wi-Fi network (for voice control).
• 📌 The latest firmware is installed on the TV (check in Settings). → On TV. → Update of the PO).
• 📌 Yandex Station Updated to Update Version (Go to Devices in Yandex App) → Column settings → Update).

Critical note: if your TV is released before 2019 (for example, Mi TV 4 on Android 8), the probability of successful synchronization over HDMI ARC tends to zero, in which case only Bluetooth or auxiliary cables remain.

2. Method 1: Connect via HDMI ARC (recommended)

HDMI ARC (Audio Return Channel) is the most reliable way to synchronize, as it transmits sound from TV to speaker without delay and supports voice control.

1. Connect Yandex Station to an HDMI ARC port on your TV (usually signed or highlighted in color). Use an HDMI 2.0 cable or higher - older versions may not support ARC.
2. On the TV, go to Settings → Sound → Digital Sound Output and select HDMI ARC.
3. Activate HDMI-CEC (in Xiaomi, this option can be called AnyNet+ or Simplink): path - Settings → Devices and accessories → HDMI-CEC.
4. In the Yandex app (on your smartphone), open the device section, select your Station and enable the TV Control option.

The TV and the station are included in one outlet (220V power supply)

It uses an HDMI ARC port (not a regular HDMI!)

In the settings of TV selected sound output on HDMI ARC

HDMI-CEC enabled on both devices

Updated firmware TV and Yandex Stations-->

Important: Xiaomi TVs with MIUI TV 3.0+ firmware may need to reboot after connecting ARC. If the sound does not appear, turn off the cable, restart both devices and reconnect.

💡

If the ARC is late, try turning off Dolby or DTS audio processing in the TV settings (Sound → Additional), which eliminates lag in 90% of cases.

Method 2: Synchronization over Bluetooth (for older models)

If your TV doesn’t support HDMI ARC (e.g. Mi TV 4A or Redmi TV 70), you’ll still have Bluetooth connectivity, which is easier to set up but has limitations:

• 🔊 The sound is delayed (~100-300 MS) as seen when watching movies.
• 🎤 Voice control is not working – the station will only be used as a column.
• 🔄 Each time the TV is turned on, a reconnection may be required.

Instructions for connection:

1. On TV: Settings → Devices and accessories → Bluetooth → turn on search.
2. On Yandex Stations: say "Alice, turn on Bluetooth" or press the Microphone button for 5 seconds.
3. In the list of found devices on TV, select your Station (name will be in Yandex Station format [XXX]).
4. Confirm the pairing on both devices.

⚠️ Attention: on Xiaomi TVs with Fire OS (For example, some Redmi Smart models TV) Third-party speakers may be blocked:

Go to Settings → Applications → Manage installed applications, find Bluetooth, clear the cache and data. Re-pair the pairing after the reboot.

Method 3: Alternative methods (Aux, optical cable)

If neither HDMI ARC nor Bluetooth works, there are analog or optical connections, which are devoid of smart functions (voice control), but guarantee stable sound.

Connection via Aux cable (3.5 mm)

Suitable for:

• 🎧 Yandex Mini Station (Aux-In Entrance).
• 📺 Xiaomi TVs with output of 3.5 mm (for example, Mi) TV 4A 32").

Instructions:

1. Connect the 3.5 mm → 3.5 mm cable from the Audio Out TV output to the Aux-In input at the Station.
2. On the TV, select the sound source: Settings → Sound → Exit → Analog.
3. At the station, say, "Alice, turn on the auxiliary entrance."

Optical cable (TOSLINK)

Optical output is available only at Yandex Max Station and flagship Xiaomi TVs (for example, Mi TV Q2).

• 🎵 No loss of sound quality (supported by Dolby Digital).
• 🔇 No electrical interference.

To connect:

1. Connect the Optical Out port to the TV with the Optical In port at the Station.
2. In the TV settings (Sound → Digital output), select Optical/PCM.
3. At the station in the Yandex application, activate the optical input.

💡

Optical and Aux are the only methods that guarantee synchronization of sound without delay, but they deprive you of voice control of the TV through Alice.

5. setting up voice control of the TV

Once connected successfully (especially via HDMI ARC), you can configure voice control of the TV via Alice.

1. Open the Yandex app on your smartphone and select your Station.
2. Go to Settings → Smart Home → Add the device and select the TV.
3. Follow the instructions on the screen – you will need to confirm the connection on the TV (a code or permission request may appear).
4. After synchronization, check the commands: 📺 "Alice, turn on the TV" 🔊 "Alice, turn it up 20%" 🎬 "Alice, find the Lord of the Rings movie on the Movie Search"

⚠️ Attention: on Xiaomi TVs with PatchWall (shell for India), voice control via Alice may not work properly.Solution:

Set your TV region to Russia (Settings → Personal Data → Region) and restart your device. This will unlock support for third-party voice assistants.

💡

Create a script for a TV in Yandex, for example, the Alice Movie Evening team can turn on the TV at the same time, set the volume to 50%, start Netflix and dim the lights (if there are smart lamps).

6. Solving common problems

Even with the right setup, errors can occur, and below is a checklist for diagnosing and solving typical problems:

If the problem is not solved, try resetting the network settings on your TV:

1. Settings → Network and connections → Reset network settings.
2. Reboot the TV and the station.
3. Reconnect from scratch.

FAQ: Frequent questions