Xiaomi Zone Cleaning: Full Instructions for Setup in 2026

Xiaomi vacuum cleaners have long ceased to be a luxury — they have become indispensable assistants in everyday life. But not all users know that these devices are able not only to move around the room randomly, but also to perform spot cleaning of selected areas. Area cleaning allows you to clean only those areas that require attention: under the dinner table after breakfast, near the front door with street mud or in the nursery after games. In this article, we will discuss how to properly configure zonal cleaning on different Xiaomi models (including Mi Robot, Dreame and Viomi), which errors users often make, and how to automate the process with the help of scenarios.

It’s important to understand that the zonal cleaning capabilities depend on the vacuum cleaner model and firmware version. For example, budget versions like Mi Robot Vacuum-Mop Essential only support basic functions, while flagships like Xiaomi Robot Vacuum-Mop 2 Ultra allow you to create up to 10 zones with different cleaning parameters. We’ll look at universal methods that work on most devices, and we’ll also reveal hidden features that are not written about in official instructions – for example, how to bypass the limitation on the number of zones or adjust the cleaning schedule with regard to floor moisture.

Which Xiaomi models support zonal cleaning?

Not all Xiaomi robot vacuum cleaners are capable of area cleaning, a feature only available on laser-navigated models (LDS) or visual positioning (VSLAM), And here are the key series where the function is guaranteed to work:

• 🔹 Mi Robot Vacuum-Mop 2 (all versions including Pro and Ultra)
• 🔹 Dreame Bot (series) D9, L10, Z10 Pro)
• 🔹 Viomi V2/V3 (firmware 3.5.8)
• 🔹 Xiaomi Mi Robot Vacuum 1S (map update)

If your model is not included in the list, check its characteristics on the official website or in the Mi Home app.

1. Open the Mi Home app.
2. Choose your vacuum cleaner.
3. Go to Settings → About the device → Firmware version.
4. Compare the version with the minimum requirements for area cleaning (usually 1.5.0 and above).

Budget models without laser navigation (such as Mi Robot Vacuum-Mop Essential) may offer “virtual walls” or “no-go zones”, but they do not have full zonal cleaning, in which case the alternative would be manually directing the vacuum cleaner through an app or voice commands (if Alice or Google Assistant is supported).

Preparation for zonal cleaning: create a map of the room

Before you can adjust the zones, the vacuum cleaner has to build an accurate map of your home, and without it, you can't clean the area.

1. First cleaning. Run the vacuum cleaner in full cleaning mode (Settings) → Cleaning → Make sure all doors are open and furniture does not block the passageway.
2. Check the map. After cleaning, open the map section in Mi Home. If the rooms are not available or they are not displayed correctly, repeat the cleaning.
3. Manual adjustment. You can manually divide rooms, merge zones, or change the boundaries of the zones in the app. To do this, click on the map and select Edit.

Pay attention to the quality of the card:

• 🟢 Good map: clear room boundaries, right angles, no holes in walls.
• 🟡 Middle map: there are slight distortions, but rooms are recognized.
• 🔴 Bad map: rooms merge, walls curve, zones do not match reality.

If the map is not built well, try:

• 🔄 Restart the vacuum cleaner and repeat cleaning in good lighting.
• 📱 Update the firmware through Settings → Update of the PO.
• 🧹 Remove small objects (wires, toys) from the floor that can interfere with navigation.

💡

If the vacuum cleaner is constantly "lost" in the same area, place a beacon there (for example, a bright Scotch on the wall), the laser sensor will focus on it when building a map.

Step-by-step setting up zonal cleaning in Mi Home

Once the map is ready, you can start creating zones, and the instructions are suitable for most Xiaomi models (except for the trimmed versions for some regions).

1. Open the map. In the Mi Home app, select your vacuum cleaner and go to the Map tab.
2. Select edit mode. Click on the pencil icon (🖊️) or edit the map.
3. Create a zone. Click Add a zone and circle the desired area on the map. Minimum zone size — 1×1.
4. Set up the settings. Once you create the zone, you'll see a menu with options: 🧹 Cleaning type: vacuum cleaner only, mop only, or both. 🔄 Intensity: Standard, enhanced or quiet. 🕒 Number of passes: 1 to 3 (for severe pollution).

Keep the zone.

Ready.

For convenience, you can mark the zones with color:

• 🔴 Red - heavily polluted areas (3 aisles).
• 🟢 Green - Daily cleaning (1 aisle).
• 🔵 Blue - wet cleaning (mop only).

All doors to untidy rooms are closed|

Removed wires and small objects from the floor|

Vacuum is at least 50% charged |

Selected the correct cleaning intensity-->

If the desired area is not saved, check:

• 📵 There are no limits on the number of zones (in budget models, the maximum) 3-5 zone).
• 🔄 Is the vacuum cleaner firmware and Mi Home app updated.
• 📡 Is Wi-Fi stable (with a weak signal, the card can be reset).

Schedule and automation of zone cleaning

One of the most useful features is automatic cleaning, which allows you to clean the kitchen every day after breakfast and the hallway in the evenings, for example, by setting up less than a minute.

1. At Mi Home, go to the Schedule (clock icon) ⏰).
2. Click Add and select Area Cleanup.
3. Specify the days of the week, the time and select the saved area.
4. Set up additional parameters: 🔕 Quiet mode: if cleaning at night. 💧 Wet cleaning: turn on / off the mop. 🔋 Charge level: start cleaning only at 80% charge.

For advanced users, smart home integration is available, for example, you can customize the scenario:

⚠️ Note: If you use Google Home or Apple HomeKit, zonal cleaning via voice commands may not work due to restrictions API Xiaomi. then use Mi Home Automations (in-app automation).

To set up automation:

1. At Mi Home, go to Profile → Automation.
2. Click Add Automation.
3. Select the trigger (time, geolocation, sensor) and action (start cleaning).
4. Save the script and test it out.

💡

Automation with geolocation works only when switched on GPS If the script doesn't work, check the permissions for Mi Home in your phone settings.

Common Mistakes and How to Avoid Them

Even experienced users sometimes have problems with zonal cleaning. TOP-5 mistakes and their solutions:

1. The vacuum cleaner can't find the area. The reason is that the map got lost after moving the vacuum cleaner or furniture. Solution: Run a full cleaning to rebuild the map or manually adjust the area in the application.
2. The zone is saved, but the cleaning doesn't start, because the battery is low (less than 20%) or the vacuum cleaner is on the base, solution: Charge the device to 50% or move it closer to the zone manually.
3. The vacuum cleaner removes the wrong area, because it's not the right zone, or it's the wrong map, so you can remove the zone and recreate it by looking at real objects like walls, furniture.
4. Wet cleaning doesn't work. Reason: not enough water in the tank or mop mode is turned off. Solution: Check the water level and zone settings (vacuum cleaner mode should be selected). + opus").
5. Zones are reset after the update. Reason: Reset when you update the firmware. Solution: Save screenshots of the zone map before you update to quickly restore them.

⚠️ Warning: If the vacuum cleaner doesn't return to the base after zonal cleaning, check the path to it on the map. Sometimes the algorithm will route through "walls" that are not visible on the map (for example, glass partitions.

Another common problem is that the vacuum cleaner forgets the zones after rebooting, which is typical of models with outdated firmware.

• Update the firmware through Settings → Software update.
• If there are no updates, try resetting the vacuum cleaner settings to factory (Settings) → Reset) and reconfigure the zones.

Secrets and life hacks for experienced users

If you’ve already mastered the basic setup, here are some advanced techniques that will make cleaning even more efficient:

• 🔄 Multi-season cleaning. Some firmware can run multiple zones in a row. For this: Create zones called Zone 1, Zone 2, etc. Add a few tasks to your schedule at 5-minute intervals.

Exact zone boundaries.

virtual walls

Map settings → Add a wall

Charge optimization.

docking-station

Multi-Floor Mapping

Cleaning by pollution type.

• 🍪 Crumbs: 2 aisles vacuum cleaner, no mop.
• 🐾 Animal hair: 3 passes with maximum power.
• 🩴 Dust: 1 pass vacuum cleaner + wet-cleaning.

For supported models AI-Recognitions (e.g. DreameBot) L10 Ultra) additional options available:

• 🤖 The vacuum cleaner itself extracts highly contaminated areas and suggests that they be removed.
• 📊 Cleaning statistics: you can see in the app which areas require attention most often.

💡

If your vacuum cleaner supports voice control, create a command like “Alice, start cleaning under the table.” To do this, link Mi Home to Yandex.Station or Google Assistant.

Comparison of zonal cleaning on different Xiaomi models

Not all Xiaomi robot vacuum cleaners are equally good at area cleaning, and here is a comparison table of the capabilities of popular models:

When choosing a model, pay attention to:

• 🔹 Type of navigation: LDS (laser) more precisely than VSLAM (camera).
• 🔹 Multi-card support: if you have multiple floors.
• 🔹 Firmware Update: Some Budget Models Don't Get New Features.

If you have already bought a vacuum cleaner and understand that the possibilities of zonal cleaning are not enough, consider alternative solutions:

• 🔄 Use virtual walls to limit areas.
• 📱 Set up voice commands to manually start cleaning in the desired area.
• 🤖 Buy a second docking station (for supported models) to split the house into two cards.

FAQ: Frequent questions about Xiaomi zonal cleaning