How to do wet cleaning with a robot vacuum cleaner Xiaomi Vacuum: a detailed guide

Robot vacuum cleaners Xiaomi Vacuum has long ceased to be just “smart brooms” – modern models (for example, Xiaomi Robot Vacuum-Mop 2 Pro or Xiaomi Mi Robot Vacuum-Mop P) combine dry and wet cleaning, turning into full-fledged assistants at home. However, many users still do not use the function of wet cleaning at full power: someone is afraid to spoil the equipment, someone does not know how to set up the modes, and someone simply does not understand why after cleaning there are divorces. In this article, we analyze the nuance of the robots on the nuance of cleaning tools for the choice of the wet room.

Important: wet cleaning on Xiaomi robots works on the principle of micro-cleaning — the wipe is only slightly moistened to collect dust and not leave puddles. It does not replace a full mop washing of floors, but it is ideal for daily cleanliness. If you expect a robot to deep clean old dirt, it is better to combine its work with manual cleaning 1-2 times a week.

What Xiaomi models support wet cleaning

Not all Xiaomi robot vacuum cleaners can wash floors. The wet cleaning feature appeared in the Mi Robot Vacuum-Mop line and developed into more advanced series. Here are the key models that support this option:

• 🔹 Xiaomi Mi Robot Vacuum-Mop Essential – budget model with basic wet cleaning modes.
• 🔹 Xiaomi Mi Robot Vacuum-Mop 2 Lite/Pro — Improved navigation and regulation of humidity intensity.
• 🔹 Xiaomi Robot Vacuum-Mop 2 Ultra – flagship with automatic washing and drying napkins based on.
• 🔹 Xiaomi Mi Robot Vacuum-Mop P – support for zoning and water level selection for different coatings.
• 🔹 DreameBot (e.g., DreameBot, D9 or L10s Ultra – Xiaomi sub-brand with enhanced cleaning features.

To check if your model supports wet cleaning, check the specifications on the official website or find a water tank and a microfiber wipe in the package. If they do not exist, your robot is only designed for dry cleaning.

⚠️ Note: Do not attempt to modify robots without wet cleaning (e.g. Xiaomi Mi Robot Vacuum) 1S). This will cause electronics to break and warranty cancellation.

Preparing the robot for the first wet cleaning

Before you start cleaning wet, you need to properly assemble and configure the robot, and if you skip this stage, you risk poor cleaning or even damage to the equipment.

First, install a water tank (usually a package that is attached to or in place of a dust collector).

• 💧 The reservoir is tightly fixed - there are no backlashes or slits.
• 🔧 The lid of the tank is closed before clicking (otherwise the water will flow out).
• 🧼 Only clean water or a special detergent is poured into the tank (read below about the choice of cleaning products).

Next, you can attach a microfiber napkin to the bottom of the robot.

• 🧹 Be straightened without folds (otherwise there will be unharvested areas).
• 🔄 Easy to remove for washing (check Velcro or fasteners).
• 🚫 Do not close the sensors and sensors of the robot (especially in models with laser navigation).

Install a water tank|Pour water/cleaner|Secure the napkin without folds|Check the attachment of the side brushes|Clean the main brush of hair-->

Xiaomi Mi Robot Vacuum-Mop 2 Pro|Xiaomi Mi Robot Vacuum-Mop Essential|Xiaomi Robot Vacuum-Mop 2 Ultra|DreameBot (D9, L10s etc.)|Another model|I haven't bought it yet.-->

Setting up wet cleaning modes in the Mi Home app

All modern Xiaomi robots are controlled through the Mi Home app (or Xiaomi Home for new models), where you can flexibly adjust wet cleaning options, select intensity and even program your schedule.

To set up the cleaning:

1. Open the app and select your robot.
2. Go to the Cleaning section → Cleaning settings.
3. Enable the option of Wet Cleaning (or Mop Mode in English version).
4. Choose the moisture level (usually 3-4 modes: from “light” for laminate to “intensive” for tile).
5. If necessary, activate Zoning – for example, so that the robot does not wash carpets.

In models with support for mapping (for example, Xiaomi Robot Vacuum-Mop 2 Pro) you can:

• 🗺️ Divide the room into zones and assign a different level of humidification for each.
• 🚫 Avoid cleaning in certain rooms (such as where carpets are placed).
• 🔄 Re-cleaning contaminated areas.

⚠️ Warning: If Xiaomi robot starts leaving puddles, check the integrity of the napkin and the density of the tank closure.In 80% of cases, the problem lies in a worn microfiber or improper assembly.

Choosing a detergent: what can and can not be poured

Xiaomi recommends using only clean water or special cleaning products for robot vacuum cleaners for wet cleaning, but in practice many users experiment with household chemicals – often without consequences, but sometimes this leads to breakdowns.

Let’s see what can and can not be put into the tank:

• ✅ Permitted:
• 💧 Clean water (optimum for daily cleaning).
• 🧴 Special tools for robot vacuum cleaners (for example, Xiaomi Floor Detergent or analogues from Dreame).
• 🍋 Diluted vinegar (1 tbsp. l. per 1 liter of water) - for disinfection, but not more often than 1 time per month.
• ❌ Forbidden:
• 🧼 Household detergents (such as Mr. Proper or Cif) – foam will clog the water supply system.
• 🧂 Chlorine-containing products (type of Whiteness) - corrode rubber seals.
• 🛢️ Concentrated alcohol-containing solutions - can damage plastic.

Critical: if you use a non-original detergent, be sure to check its pH level. The optimal range is 5.5-8.5. Acid or alkaline solutions shorten the life of the wipe and rubber parts of the robot.

Step-by-step: how to start wet cleaning

Now, let’s get to the point. Here’s a universal guide to running wet cleaning on Xiaomi Vacuum-Mop robots (relevant for most models):

1. Prepare the room: 🧹 Remove small objects from the floor (wires, toys, socks). 🚪 Close the doors to rooms where cleaning is not required. 🛋️ Lift the edges of the carpets or remove them (unless the robot supports automatic lifting of the wipe).
2. Set up the robot: 📱 In the Mi Home app, select Wet Cleaning or Mop Mode. 💧 Set the humidity level (select the Medium for the first time). 🗺️ Configure zoning if necessary (e.g., eliminate carpets).
3. Start cleaning: 🎯 Click Start Cleaning in the App or on the Body of the Robot. ⏳ Wait until completion (time depends on the area of the room).
4. After cleaning: 🧺 Remove and wash the napkin under running water. 💦 Empty and dry the water tank. 🔋 Put the robot on the base to recharge.

If the robot supports automatic washing of a wipe (for example, Xiaomi Robot Vacuum-Mop 2 Ultra), after cleaning it will return to the base, where it will wash and dry the fabric, in which case it is enough to add water to the tank base.

💡

For better results, start a wet cleaning after dry, so the robot will first collect large debris with brushes, and then clean the fine dust with a napkin.

Typical problems and their solutions

Even with the right setup, wet cleaning can go wrong. Consider the most common problems and ways to fix them:

If the Xiaomi robot has started to “glutch” – for example, chaotically drives or does not return to the base, reset the settings through the application (Settings) → Reset to factory) and reconfigure the room map again.

💡

90 percent of the problems with wet cleaning are solved by cleaning napkins and nozzles, and washing these items regularly will last longer.

Care for the robot after wet cleaning

For Xiaomi robot vacuum cleaner to last a long time, after each wet cleaning, you need to carry out preventive maintenance. This will take no more than 5 minutes, but save you money on repairs.

Checklist for care:

• 🧼 Wash your towel: Wash it by hand after 2-3 cleanings (machine washing is prohibited.
• 💦 Water reservoir: Rinse after each use, disinfect 1 time per week with a weak vinegar solution.
• 🧹 Main brush: Clean hair and thread after each cleaning. Remove and wash once a month.
• 🔧 Nozzles: Check for blockages (can be cleaned with a toothpick).
• 🔋 Base: Wipe the charging contacts with a dry cloth (oxidation of contacts is a common cause of malfunctions).

For models with a wipe self-cleaning function (e.g. Xiaomi Robot Vacuum-Mop 2 Ultra):

• 🧽 1 time a week wash the pallet of the base (there accumulates dirt).
• 🔄 Change the water in the tank of the base after 3-4 cleanings.
• 🚫 Do not use aggressive detergents to clean the base – only water or soft solutions.

⚠️ Warning: If the robot has not been used for a long time (for example, it was lying in a warehouse or in a box), before the first cleaning, wash the water tank 2-3 times. It could accumulate a factory preservative, which, when mixed with detergent, gives an unpleasant smell.

Xiaomi Comparison with Competitors: Who Is Better at Cleaning the Floors?

Xiaomi’s vacuum cleaner robots aren’t the only ones on the market that can clean floors, but let’s compare them to the main competitors in terms of key wet cleaning parameters:

Xiaomi’s main advantage is its price-performance ratio: robots are almost as functional as Roborock (which is the same manufacturer, just a different brand), but they are 20 to 30 percent cheaper. However, if you want maximum automation (such as self-cleaning a wipe and replacing water), you should look at the flagships Ecovacs or Roborock.

FAQ: Frequent questions about wet cleaning