Liquid soap for dispenser Xiaomi: 5 proven recipes with their own hands

Xiaomi's automatic liquid soap dispensers are not only a stylish solution for the bathroom or kitchen, but also a way to maintain hygiene without unnecessary hassle. But the original consumable cartridges cost a lot, and their composition is not always ideal for sensitive skin or ecology. Why not make soap yourself? It's cheaper, safer and allows you to control the ingredients.

In this article, you will find 5 proven liquid soap recipes that are compatible with Xiaomi Mi Automatic Soap Dispenser, Mijia Smart Liquid Dispenser and similar dispensers. We will analyze which components are safe for the equipment, how to avoid clogging the mechanism, and give tips on storing homemade products, and also answer frequent questions, such as whether you can use a shower gel or how to extend the life of the dispenser.

Spoiler: Ordinary toilet soap or shampoo won't work -- they're too thick and can knock out the pump of the dispenser. But properly diluted formulations based on glycerol, coconut oil or even baby soap work just as well as branded cartridges.

Why homemade soap is better than purchased for Xiaomi dispenser

Original cartridges for dispensers Xiaomi cost from 300 to 800 rubles for 300-500 ml, and they are short-lived — with active use, the consumption is up to 2 ml per press. Homemade counterparts are 5-10 times cheaper, and their quality often exceeds factory options.

• 💰 Savings: cost of 1 liter of homemade soap - from 50 to 150 rubles (depending on the recipe).
• 🌿 Environmental: no sulphates (SLS/SLES), Parabens and synthetic fragrances that irritate the skin.
• ⚙️ Safety for engineering: the correct consistency does not clog the pump and valves of the dispenser.
• 🎨 Customization: you can add essential oils, aloe or vitamin E for additional care.

Also, homemade soaps are often less aggressive for hand skin than industrial counterparts, such as in recipes without sodium lauryl sulfate (SLS) There is no tightness after washing, which is especially important for people with dermatitis or allergies.

⚠️ Attention: Not all liquids are suitable for automatic dispensers. shower gel, shampoo or ordinary liquid soap from the store are too viscous and can clog the mechanism. Use only specially diluted formulations (see recipes below).

What ingredients are suitable (and which are not)

Not all components are compatible with Xiaomi dispensers, and the rule is that the liquid must be fluid enough for the pump to pump, but not too watery, otherwise it will flow spontaneously. Optimal viscosity is like liquid hand soap (not gel!).

To dilute the soap base, use distilled or boiled water to prevent plaque from forming inside the dispenser. If you want to add antibacterial effect, tea tree oil (2-3 drops per 100 ml) or aloe vera extract (1 tsp per 200 ml) is fine.

💡

Before the first use of homemade soap, wash the Xiaomi dispenser with warm water with vinegar (1:1) - this will remove the remnants of the factory lubricant and prevent reaction with the new composition.

Recipe 1: Classic glycerin soap (universal version)

This recipe is suitable for all Xiaomi dispenser models, including Mi Automatic Soap Dispenser and Mijia Smart Liquid Dispenser.The soap is neutral, odorless, with soft foam.

Ingredients:

• 🧼 100 g of transparent glycerin soap (can be bought in soap shops or pharmacy).
• 💧 300 ml of distilled water.
• 🌿 5 drops of essential oil (optional: lavender, eucalyptus or lemon).
• 🍯 1 tsp. honey or glycerin (to soften the skin).

Instructions:

1. Grate the glycerin soap on the grate or cut into small pieces.
2. Place in a heat-resistant dish and melt in a water bath (do not boil!).
3. Add warm water in small portions, stirring constantly, until completely dissolved.
4. Take it off the fire, add the essential oil and honey/glycerin. Stir it.
5. Cool to room temperature and pour into a dispenser bottle.

Soap flows easily out of the bottle when tilted (not thick)|

No lumps or undissolved particles|

Color uniform (without stratification)|

Smell neutral or weak (not sharp)-->

You can store this soap for up to 3 months in a cool place. If it thickens over time, just add a little warm water and shake it.

⚠️ Warning: Do not use metal dishes for cooking - glycerol can react with oxides.

Recipe 2: Antibacterial soap with tea tree oil

This is ideal for kitchens or public places where disinfection is important, and tea tree oil has antimicrobial and antifungal effects, but does not dry the skin as much as alcohol antiseptics.

Ingredients:

• 🧼 50g baby soap (no fragrances, for example Johnson's Baby).
• 💧 200 ml of boiled water.
• 🌿 10 drops of tea tree oil.
• 🍋 1 tbsp lemon juice (natural preservative).

Features of preparation:

1. Soak your baby soap in a grater and dissolve it in hot water (not boiling water!).
2. Add tea tree oil and lemon juice, mix.
3. Let the mixture stand for 1-2 hours - during this time, possible flakes will settle.
4. Carefully drain the top layer into the dispenser without stirring the sediment.

This soap is suitable for sensitive skin, but is not recommended for children under 3 years of age because of essential oils.Shelf life - up to 2 months (lemon juice prevents spoilage, but over time loses its effectiveness).

💡

Tea tree oil can not be replaced with other essential oils (for example, citrus) - they do not give an antibacterial effect and can irritate the skin.

Recipe 3: Aloe Vera Soap for Dry Skin

If your skin tightens or peels after washing your hands, this recipe will be a lifeline: Aloe vera moisturizes and heals microcracks, and olive oil restores the lipid barrier.

Ingredients:

• 🧼 70g liquid Castilian soap (or glycerin).
• 💧 150 ml of water.
• 🌱 2 tbsp. l. aloe vera gel (natural, without additives).
• 🫒 1 tsp olive oil.

The secrets of cooking:

Mix all the ingredients in a blender at low speeds, this will help to avoid lumps. If the soap is too thick, add another 50 ml of water. For the flavor, you can drop lavender oil (2-3 drops), but do not overdo it - strong fragrances can cause allergies.

This soap doesn't foam much, but it's great for cleaning and moisturizing, and it's good for Xiaomi foaming dispensers, because it doesn't create too much foam that can clog the mechanism.

Recipe 4: Economical version of household soap (with reservations)

Household soap (72%) is a cheap and efficient cleaner, but it is not suitable for Xiaomi dispensers in its pure form because of its high alkalinity, but can be adapted if pH is diluted and neutralized properly.

Ingredients:

• 🧼 30g household soap (grate on grater).
• 💧 500 ml of water.
• 🍺 1 tbsp baking soda (for softening).
• 🌿 5 drops of lavender oil (optional).

Important nuances:

1. Dissolve the soap chips in boiling water, then add soda - this will reduce the aggressiveness of the alkali.
2. Let the mixture cool and settle for 12 hours. Pour the top layer, leaving the sediment.
3. Before pouring into the dispenser, check the pH with a test strip (optimally 7-8).

⚠️ Warning: Even diluted household soap can erode plastic parts of the dispenser over long-term use, we recommend alternating it with softer recipes (for example, glycerin) and washing the dispenser once a month with vinegar solution.

This composition is suitable for technical needs (hand washing after repair, cleaning) or if you have oily skin, but not for daily use on dry or sensitive skin.

Recipe 5: Foaming soap for dispensers with foaming function

Xiaomi’s foaming-mode dispensers (such as the Mijia Smart Foam Soap Dispenser) require a special composition that foams well, but they do need foaming agents, but not those found in industrial gels (they are too aggressive).

Ingredients:

• 🧼 50g liquid Castilian soap.
• 💧 100 ml of water.
• 🧴 1 tbsp coconut milk (for foaming).
• 🍯 1 tsp honey (stabilizer).
• 🌿 3 drops of eucalyptus oil (antiseptic).

How to achieve the perfect foam:

Mix all the ingredients in a blender at an average speed for 30 seconds. The foam should be light and airy, like mousse. If it's too liquid, add another 1 tsp of honey. If it's too thick, dilute it with water.

This soap is great for washing or washing hands in the bathroom, but is not recommended for the kitchen (coconut milk can sour at high temperatures).

💡

For dispensers with foaming function, recipes with a high content of oils (for example, olive) can not be used - they suppress foaming.

How to prolong the life of the dispenser Xiaomi: care and cleaning

Even the best quality homemade soap can eventually leave a plaque on the insides of the dispenser. To make the appliance last longer, follow these tips:

• 🔄 Wash the dispenser every 2-3 weeks: pour warm water with vinegar (1:1), turn it on for 10-15 seconds, then rinse with clean water.
• 🚫 Do not leave the dispenser empty for a long time - this leads to drying of seals.
• ☀️ Keep in the shade: direct sunlight accelerates soap spoilage and plastic degradation.
• 🔋 Watch the battery: if the dispenser began to “sneeze” or give out soap jerks, replace the batteries.

If the dispenser stops working, check:

1. Is there any stain in the stain?
2. Did not get water into the electronic unit (refuse 24 hours without batteries).
3. Is the pump worn out (characteristically, humming without soap supply).

For deep cleaning, disassemble the dispenser (carefully pulling the lid with a flat screwdriver) and rinse all the parts in a soapy solution. Don't use abrasives or hard brushes - they scratch the plastic.

FAQ: Frequent questions about homemade soap for Xiaomi