How to properly configure the robot vacuum cleaner Xiaomi with the function of wet cleaning: from unpacking to fine settings

Xiaomi’s wet cleaning robots have become indispensable tools in modern homes, combining intelligent navigation algorithms with deep floor cleaning. However, many users face difficulties in their first run, from improperly installing accessories to improperly selected cleaning modes, leading to device frustration. This article will help avoid typical errors and reveal all the nuances of customization – from basic training to advanced features in the branded Mi Home app.

We will pay special attention to models with a hybrid cleaning system (for example, Xiaomi Mi Robot Vacuum-Mop 2 Pro or DreameBot). W10), Where the combination of dry and wet cleaning requires precise calibration, you will learn how to properly install the water tank, adjust the intensity of floor washing, and integrate the device into the Xiaomi Smart Home ecosystem to automate processes. And for those who already use a robot vacuum cleaner, we have prepared a section with tips for optimizing existing settings - after all, even small adjustments can significantly improve the efficiency of cleaning.

Preparation of the robot vacuum cleaner for the first launch: unpacking and testing of the complete set

Before the first switch on, you need to carefully check all the components of the kit. In the box with the Xiaomi robot vacuum cleaner, you should find:

• 🤖 The main robot block with a brush and side brushes installed
• 💧 Water tank (for models with wet cleaning) and dust container
• 🔋 Charging station with power supply
• 🧹 Spare filters (HEPA and/or washing) and wet cleaning wipes
• 📄 Instructions for use (often in several languages, including Russian)

Pay special attention to the washing module: in models such as Xiaomi Mi Mop 2 Ultra, it can be pre-installed, and in budget versions (for example, Redmi). 1C) — require manual assembly. Check the integrity of the sealing rubber bands on the water tank, which will cause leaks during cleaning. Also, remember to remove the protective film from the sensors and cameras (if you have any in your model).

⚠️ Warning: If the battery power adapter for the charging station is missing, don't use third-party units - this could damage the battery. Xiaomi's original adapters have an output voltage 20V/1.2A or 24V/0.75A model-wise.

Before the first launch, it is recommended to fully charge the robot vacuum cleaner (the indicator on the body should burn green). 4-6 Also, you should choose a place for a charging station: it should be flat, with at least free space. 1.5 m in front and 0.5 I'm on the sides so the robot can safely return to base.

Installation and configuration of the Mi Home mobile application

The Mi Home app (or Xiaomi Home in newer versions) is a central element of robot vacuum control and is a must-have for the device to function properly, especially if you plan to use zoning features, a cleaning schedule or integration with other Xiaomi devices.

Download the application from official stores:

• 📱 App Store for iOS
• 🤖 Google Play for Android

After installation, follow the following steps:

1. Create a Xiaomi account (or log in to an existing one). Importantly, link your account to the region where you bought the robot vacuum cleaner (e.g. Russia or Europe), otherwise you may have trouble updating your firmware.
2. Click Add Device (+) → Select Smart Home → Robot vacuum cleaner category.
3. Follow the instructions on the screen: turn on the robot, holding the power button 3-5 seconds until you hear the beep.
4. Connect the robot to a Wi-Fi network (only the 2.4 GHz – 5 GHz range is not supported!).

⚠️ Note: If the robot vacuum cleaner does not connect to Wi-Fi, check if your router blocks the device from the Wi-Fi. MAC-Add Xiaomi addresses to your router settings. MAC-Robot address (indicated on the sticker under the lid) in the list of allowed devices.

Once successfully connected, the robot will automatically update the firmware (if a new version is available). Do not interrupt the update process, this can cause a malfunction of the navigation system, and the robot will "lose" even in simple rooms. Update time takes from 5 to 20 minutes depending on the speed of the Internet.

Install the Mi Home app|Create/log in to a Xiaomi account|Connect the robot to Wi-Fi 2.4 GHz|Charge the robot to 100%|Remove the protective film from the sensors|Install a water tank (for models with wet cleaning)-->

Customization of cleaning modes: dry vs wet

The main advantage of Xiaomi's wet-cleaning robot vacuum cleaners is that they can combine both types of cleaning, but the wrong mode choices can lead to floor divorces or insufficient dust collection. Let's figure out how to set each mode correctly.

The Mi Home app has the following basic modes available:

• 🌪️ Only dry cleaning – suitable for carpets, soft coatings or quick dust cleaning.
• 💦 Only wet cleaning is optimal for hard floors (tiles, laminate, parquet) after dry cleaning.
• 🔄 Combined cleaning: The robot vacuums first, then cleans the floor. 30-50%.
• 🎯 Area cleaning – cleaning only selected areas (for example, near a chair or dining area).

To adjust the intensity of wet cleaning go to: Device → Settings → Cleaning regimes → Wet cleaning.

Here you can select the water supply level:

For models with a cleaning module lift function (e.g. DreameBot) W10) In the settings, you'll see an additional setting called "Height of Ascent" (mm). 5-8 mm for carpets and 0 This will prevent carpets from getting wet during wet cleaning.

💡

If the robot leaves a squash on the floor, reduce the water supply level by one step and use special cleaning products for robot vacuum cleaners (for example, Xiaomi Floor Cleaner).

Creation of a room map and zoning

Accurate map of the room is the basis for effective cleaning. Xiaomi robots use laser navigation (LDS) visual sensors (VSLAM) The first cleaning must always be done in full cleaning mode so that the robot can make the most detailed map possible.

Once the cleaning is complete, the map will be saved in the Mi Home app.

1. Divide the room into zones (for example, "Kitchen", "Corridor", "Bedroom").
2. Install virtual walls to restrict access to certain areas (e.g. pet bowls).
3. Identify priority areas that will be cleaned first.
4. Save multiple floors (if the robot supports multi-level maps).

For map editing:

1. Open the Map tab in the app.
2. Click on the pencil icon (✏️) top-right.
3. Use the tools: 📏 Separation of rooms – to create boundaries between rooms. 🚫 Virtual Wall – to block areas. 🎯 Cleaning zone – to allocate priority cleaning areas.

Save the changes.

⚠️ Attention: If the robot constantly loses the card after restarting, check if the charging station has moved. 10-15 It can knock down the navigation system, and also make sure that there is enough light in the room - in the dark of the camera. VSLAM work irregularly.

For supported models 3D-Mapping (e.g. Xiaomi Mi Robot Vacuum-Mop 2 Pro) is available with the furniture recognition feature. → Additional settings → Object recognition.

This will allow the robot to bypass chairs, tables and other obstacles more carefully.

Scheduling and Automating Cleaning

One of the key benefits of robot vacuum cleaners is that you can clean your routines as planned, and you can create flexible schedules that are tailored to your lifestyle, such as running cleaning on weekdays when you're not home, or on weekends.

To create a timetable:

1. Open the schedule tab in the device menu.
2. Click Add and select the days of the week.
3. Set the start time of cleaning (within minutes).
4. Choose cleaning mode (dry, wet or combined).
5. If necessary, specify priority areas.
6. Save the schedule.

Advanced models (e.g. DreameBot) W10) maintain a dynamic schedule that takes into account:

• 📅 Your location (cleaning starts when you leave the house).
• 🌡️ Pollution level (the robot analyzes data from previous cleanings).
• 🕒 Time of day (for example, quiet mode at night).

To activate this function, go to:

Settings → Smart cleaning → Dynamic timetable

The robot vacuum cleaner can also be integrated into Xiaomi Smart Home scenarios, such as running the cleaning automatically:

• 🔌 When you turn off the smart socket (signal that you have left the house).
• 🚪 When closing the front door with a smart lock Xiaomi.
• 🌧️ After the rain ends (if the robot removes the veranda).

To do this, in the Mi Home app, go to Automation and create a new script.

💡

To save water and electricity, set up cleaning for a time when the electricity rate is minimal (for example, at night). But consider that robot noise can interfere with sleep - use "quiet mode" in the settings.

Optimization of work: tips for advanced users

Even after a basic setup, Xiaomi’s robot vacuum cleaner can be sharpened to suit the specific conditions of your home, and here are some proven tips for improving efficiency:

1. Suction adjustment by coating type

In models with adjustable suction power (for example, Xiaomi Mi Robot Vacuum-Mop 2 Pro) you can set different levels for different rooms:

• 🏠 Maximum - for carpets with long pile.
• 🛋️ Medium - for laminate and parquet.
• 🚿 Minimum - for tile in the bathroom.

This not only improves the quality of cleaning, but also prolongs the battery life.

2. Use of detergents

For wet cleaning, it is recommended to use specialized means, for example:

• 🧼 Xiaomi Floor Cleaner – not foaming, safe for robot electronics.
• 🌿 Ecover – an environmentally friendly tool for sensitive to chemistry.

Never use:

Cleaning and maintenance

Regular maintenance of a robot vacuum cleaner prolongs its life 30-50%. Here's the minimum checklist:

• 🧹 Clean the main brush of hair and thread after each cleaning.
• 🔄 Wash the water tank and mop once a week.
• 🧻 Change. HEPA-filter-in 2-3 months (or more often if there are animals in the house).
• 🔋 Calibrate the sensors every six months (in settings: Additional) → Sensor calibration).

4. Improved navigation

If the robot often gets stuck or misses areas, try:

• 🪟 Remove small objects from the floor (wires, toys, shoes).
• 🔦 Add lighting to dark corners (for example, under the sofa).
• 📏 Use beacons (sold separately) for difficult areas.

💡

If the robot constantly runs into the doorsteps, stick black tape on them - laser sensors will perceive it as an obstacle and will go around these areas.

Troubleshooting: What to do if the robot isn't working properly

Even the most reliable devices sometimes fail, and let's look at the typical problems and the ways to solve them.

If the robot produces an error with a code (for example, Error 10 or Error 14), you can decrypt it in the official documentation or through a search in the Mi Home application.

• Error 5 – A problem with the side brush (check if it is jammed).
• Error 9 – clog in the suction system (clean the tubes and filter).
• Error 12 - malfunction of the washing module (check the water supply).

To reset the robot to factory settings (if other methods did not help):

1. Turn off the robot.
2. Press the Home and Power buttons for 10 seconds.
3. After the beep release the buttons - the robot will reset.

⚠️ Warning: After resetting, all stored maps, schedules and settings will be deleted. The robot will require reconfiguration via the Mi Home app.

FAQ: Frequently Asked Questions