How to watch the mileage of the Xiaomi scooter: the full guide

Electric vehicle owners often have to check the actual wear and tear of their vehicles, especially when buying a used device or planning maintenance, as opposed to cars where data is read through the vehicle. OBD-connector, in electric scooters Xiaomi information is stored in the control unit BMS To get a good number, it's not enough to just look at the screen, because it only shows the basics.

There are several methods to get detailed operational statistics, the most accurate data can be obtained through special diagnostic programs connected via Bluetooth, but for quick checks, the regular features of the Mi Home application will also work. Understanding how to view the mileage of a Xiaomi scooter will help you avoid buying a “killed” instance and replace bearings or batteries in time.

In this article, we will look at all the available methods, from simple applications to professional software, where to look for hidden codes and how to interpret the values obtained. It is important to distinguish between total mileage and mileage after the last part replacement, since this data is stored in different memory cells of the controller.

Checking through the official Mi Home app

The most affordable way for the average user is to use official software from the manufacturer. Once the device is paired with a smartphone, the application collects basic telemetry. However, it should be noted that the interface can vary depending on the firmware version and the regional link of the account. Often users do not see the full data if they chose the wrong region when registering.

To get started, you need to open the app and go to the home page where your scooter card is displayed, and clicking on it will take you to the control menu, which usually shows your current battery charge and connection status, and to access your travel history, you need to find a section with statistics that can be called "Statistics" or "History".

Key indicators that can be seen in this section include:

• 📱 Total mileage since device activation.
• 🔋 Number of full battery charging cycles.
• 🛣️ The duration of the last trip and the average speed.
• 🔧 Status of errors (if recorded).

It's worth noting that the Mi Home app doesn't always show accurate mileage to a centimeter. Data can be rounded up or synced with a delay. If you've just rolled, the information can only be updated once you've reconnected to your Wi-Fi network or your smartphone's mobile Internet.

⚠️ Note: If the mileage in the application is displayed as 0 km, and the scooter is clearly used, this may indicate a flashing of the controller or a replacement board.

For more in-depth analysis, some versions of the app have a data export feature that allows you to save your travel history as a file and analyze it on a computer, which is convenient for maintaining a personal log of transport service.

Diagnostics via Bluetooth-terminal on Android

The most accurate information is provided by specialized software that works directly with the scooter data exchange protocols. For Xiaomi M365, Pro, Pro 2 and Essential devices, the de facto standard has become the Xiaoyun BMS program or its analogues, such as DownG. These utilities allow you to look under the hood of the control system.

The connection process requires a smartphone with Android OS and Bluetooth module enabled. It is important to understand that the standard Bluetooth settings menu is not used here - the connection is inside the application itself. First you need to download the installation file (APK), since such tools are often not available on Google Play due to security policies.

The algorithm for obtaining data is as follows:

• 📲 Launch the app and click the device search button (usually a magnifier icon or Bluetooth icon).
• 🔌 Select your scooter from the list of found devices (often displayed as M365 similarly).
• 🔑 Enter the connection password. For most models, it's 123456 or 000000 by default.
• 📊 After a successful connection, go to the tab "Info" or "Battery Info".

In the window that opens, you're interested in the Total Mileage field, which is the most reliable number, because it's read directly from the controller's nonvolatile memory, and you can see the voltage of each battery cell, which is critical to assessing its health.

Using third-party software gives you access to parameters hidden from the average user, so you can see not only the mileage, but also the number of engine errors, the temperature of the controller, and even the firmware version of each module, which turns the smartphone into a professional diagnostic scanner.

Using the DaFang app for iOS and Android

Owners of iOS devices (iPhone, iPad) are often limited in their choice of tools, as many diagnostic tools are sharpened for Android. However, there is a cross-platform solution - the DaFang application (or Flux, Freego depending on the app store), which allows for deep diagnostics of Xiaomi scooters.

The interface may seem overloaded to the beginner, but the basic data is on the first screen after you connect. It shows not only mileage, but also detailed information about the state of the battery cells. To connect, you need to activate Bluetooth on your smartphone and press the "Connect" button in the application interface.

The feature of this method is the ability not only to read, but also to write some parameters, for example, you can reset the error counter or calibrate the sensors. However, modifying the settings without understanding the consequences can lead to unstable operation of the vehicle, it is recommended to limit yourself to viewing data.

The app also has a travel log feature that can run in parallel with the standard software, which is useful if you want to track battery wear in real time, and mileage data is updated almost instantly.

⚠️ Warning: Do not attempt to change the values in the DaFang app's engineering menus.Resetting mileage or changing speed limits may result in a controller lock.

If the app doesn't see the scooter, try restarting Bluetooth on your phone or restarting the scooter itself, sometimes removing the device from the list of paired in the phone settings and trying to connect again through the utility helps.

Hidden Codes and Engineering Menu

There is a lesser-known way of getting information that doesn’t require additional software, but doesn’t work on all models, such as entering special codes through the lock screen or settings menu if implemented in firmware. However, for Xiaomi scooters, the method of “blinking” indicators is more relevant.

Some models, with a combination of power and brake presses, can go into diagnostic mode, in which the battery lights can flash in a certain way, encoding errors or software versions, but for viewing mileage, this method is poorly suited and requires knowledge of code tables.

A more workable "hidden" method is to view logs through ADB (Android Debug Bridge) if the scooter is connected to a PC, but this is the lot of advanced users.

• 🔍 Hidden data is often protected from simple reading.
• 🔧 Engineering modes are designed for service centers.
• ⚠️ Inept intervention can reset calibration settings.

Rely on the "secret button combinations" found on the Internet, the firmware is constantly updated, and the old methods stop working, and use the proven software tools described in the previous sections more reliably.

Comparative table of diagnostic methods

To make it easier for you to choose the right option, we have prepared a summary table that will help you assess the pros and cons of each method, depending on your goals and the equipment available.

And you can see from the table that the Mi Home is enough to check quickly, but if you're planning on buying a used scooter, using specialized apps on Android or iOS is a must, and they'll show you the real picture of the battery.

Service centers have tools that can read data from damaged controllers, and if software methods are not working and suspicions are high, it makes sense to turn to professionals to open the deck and visually inspect the board.

Data interpretation and maintenance

Once you get the mileage figures, it is important to correctly estimate them. For Xiaomi scooters, the resource of the main nodes is unevenly distributed. For example, wheel bearings usually require replacement every 3000-5000 km, and the battery can run 10,000 km or more when properly operated.

If the mileage is high, you should pay special attention to the condition of the tires and the braking system. Even if the electronics show zero errors, mechanical wear has not been canceled. Regular maintenance prolongs the life of the device much more effectively than rare full charges.

You should also pay attention to the difference between engine mileage and battery mileage, and if these values are very different, it may indicate that one of the nodes is replaced, and ideally, the numbers should be close, given the error of several tens of kilometers.

💡

Keep screenshots of the mileage readings when buying, in the event of a warranty or dispute with the seller, this will be proof of the actual state of the equipment at the time of the transaction.

Frequently Asked Questions (FAQ)