Xiaomi's humidifiers have proven to be reliable and technologically advanced devices, but even the most advanced equipment requires regular maintenance. Over time, mineral deposits, mucus and bacteria accumulate on the inner walls of the tank, the heating element and in hard-to-reach corners. If you ignore the need to clean, the device will emit an unpleasant odor, and harmful microorganisms will enter the air.
Many users mistakenly believe that it is enough to change the water, but this is categorically not enough to maintain hygiene. Internal cleaning of ultrasonic and traditional models requires a special approach, since improper actions can damage the sensitive membrane or electronic components. In this article, we will discuss in detail the process of washing, so that your climate device lasts long and gives only clean air.
Before you start any manipulation, it is important to understand that you are dealing with an electrical appliance in which water contacts electricity through an ultrasonic membrane. Never immerse the base of the electronic device completely in water, even if it seems that the case is sealed. Pressurized water can penetrate the control board, which will lead to irreversible failure of the device and loss of warranty.
The cleaning process begins long before you pour the cleaning product into the tank. The first thing you need to do is to completely de-energize the device. Remove the plug from the socket and make sure there is no water left in the tank. To effectively combat scale and biofilm, you need to prepare a set of products that are safe for plastic and internal components.
Citric acid or special scale removal tablets are best used as the main cleaning agent. Using aggressive household chemicals containing chlorine or strong alkalis can damage the plastic case and leave a toxic smell that will be difficult to get rid of later, you will also need a soft sponge, a toothbrush for hard-to-reach places and dry wipes made of microfiber.
Hard tap water is the main cause of white plaque on furniture and rapid overgrowth of the membrane with calcium salts. Using distilled or filtered water will significantly prolong the life of the device and reduce the frequency of necessary cleanings.
Disassembly of the device and access to internal components
Xiaomi's humidifier design (Smartmi, Deerma, Mi series) is usually modular, making it easier to access the internal parts.The standard model consists of an upper water tank, an ultrasonic membrane base pallet and sometimes an additional water softening cartridge. Disassembly does not require tools but requires care to avoid damaging the latches.
First, remove the top water tank and flip it over. If the model has a water softening cartridge, remove it and check its expiration date. It usually needs to be replaced every 1-2 months, and if it hasn't changed for a long time, it's better to throw it away, as it itself becomes a source of bacteria. Wash the container with warm water without using hard bristles.
⚠️ Warning: When removing the lid or pallet, do not make excessive efforts. Plastic in the cold or from old age becomes brittle, and a sharp jerk can break the mounts, violating the tightness of the body.
The base of the device, where the ultrasonic membrane is located, requires the most careful handling, this is a round metal or ceramic plate in the center of the bottom, which vibrates at a high frequency, breaking water into mist, damage to the membrane coating (scrapes, chips) will cause the device to stop generating steam or will do it extremely inefficiently.
How to check the integrity of the membrane?
Carefully inspect the circular plate on the bottom, it should not be cracked, deep scratches or detached areas of the coating. If the membrane is damaged, cleaning will not help - you will need to replace the knot or buy a new device.?> Scale and mineral sediments are solid deposits of calcium and magnesium salts that remain after water evaporates, formed not only on heating elements (in steam models), but also on the walls of the reservoir and around the membrane in ultrasonic ones. To remove them, a solution of citric acid is effectively used, which is safe and easy to wash off. 1-2 Tablespoons of citric acid per liter of warm water, put this solution in the base of the device so that it covers the bottom and bottom of the walls, but does not reach the level of electronic contacts. 30-60 minute. The acid will react with the salts, soften them and allow them to be easily removed. Once soaked, take a soft brush or sponge and gently rub the inner surfaces. To remove stubborn scale around the membrane, you can use a cotton swab dipped in solution. The movements should be light, without strong pressure. After mechanical cleaning, thoroughly rinse all the parts with running water several times to completely remove the residues of acid and dissolved salts. Type of pollution Recommended remedy Time of exposure Tool Fresh white plaque Citric acid solution 15-20 Minutes Soft Sponge Old scale Concentrated acid solution 40-60 Minutes Toothbrush Mucus (biofilm) A solution of vinegar or peroxide 30 Minutes Ershik with soft bristles Dust in ducts Dry cleaning Without soaking Dry brush Disinfection and fight against bacteria Wet and warm environment inside the humidifier is ideal for the reproduction of bacteria, mold and fungi. Even if the device appears clean, microscopic organisms can actively multiply in corners and seams, and regular disinfection is necessary to prevent respiratory diseases, especially if there are allergies or children in the house. For disinfection, a weak solution of table vinegar can be used (9%) or hydrogen peroxide. Pour the solution into the tank, shake it to pass through all the channels, and leave it for 30 minutes. Acetic acid effectively kills most types of bacteria and prevents mold. After the procedure, the device must be very carefully washed to prevent vinegar vapor from entering the air when further operation. There are also special disinfectants for humidifiers that can be added directly to the water during operation. However, they do not replace mechanical cleaning and treatment with concentrated solutions. Sodium hypochlorite (the basis of "White") is highly recommended for use of the modern chlorine quality of the chlorine sensor for the use of the advanced quality of the chlorine products, the chlorine chlorine chlorine sensing model, and the advanced chlorine chlorine sensing. These elements are often located at the bottom of the case or on the walls of the tank. If a film of lime or fat is formed on the humidity sensor, the device begins to display data incorrectly and may not adjust the intensity of work correctly. Wipe the sensors with a soft, slightly moist cloth without pile. Do not use abrasive materials that can scratch the sensor's sensitive surface. For a water level sensor (usually a float or contact group at the bottom), it is important to make sure that nothing interferes with its free movement. A stuck float can lead to the operation of the device without water and the combustion of the membrane. ⚠️ Warning: Be careful with electronic sensor contacts. Moisture on open contacts at the time of switching on can cause a short circuit. Always make sure that all elements are completely dry before assembly. If your model has a pre-cleaning filter (a mesh on the back of the case), it also needs to be vacuumed or washed periodically under the tap. The dust-filled filter reduces the efficiency of evaporation and increases the load on the fan, which leads to increased noise. After all water procedures comes a critical stage - drying. Assembly of the wet device is unacceptable, since residual moisture in hard-to-reach places can provoke the development of mold or corrosion of contacts. Place all the parts on a clean towel in a well-ventilated place, away from direct sunlight. Pay special attention to drying the ultrasonic membrane and the niche in which it is embedded. Water should not remain in the depressions around the plate. It is best to leave the parts dry overnight or at least for a few days. 4-5 hours. Using a hair dryer to speed up the process is not recommended, as hot air can warp thin plastic or damage adhesive joints. 💡Use cotton swabs to remove the residue of water from the narrow slits around the membrane and in the grooves for sealing gums, which will speed up drying and prevent the formation of new salt rings, and when you make sure that all the components are completely dry, you can start assembling. Place the tank on the base, making sure the sealing gums are flat and not pinched. A loose fit of the tank will cause water to leak to the floor or inside the case. After assembly, pour fresh water and test the device. To the question "how to wash the humidifier inside Xiaomi" does not get too acute, it is important to follow the prevention schedule. Complete cleaning with disassembly and use of acids is recommended once in a while. 1-2 The daily maintenance is reduced to water replacement and rinsing of the tank. Using filtered water reduces the frequency of scale formation. 70-80%. If you use tap water, be prepared to clean the appliance more often, and remember to change the water softening cartridges according to the instructions, as the resin-rich cartridge stops working and may even start to release accumulated contaminants back into the water. 💡Regular prevention takes less time than removing old scale and fighting mold. Do light cleaning weekly to ensure that the device works at maximum efficiency. In the heating season, when the humidity in the apartments drops to critical values, humidifiers work almost around the clock. During this period, the strain on the filters and membrane should be increased by performing a visual inspection and light cleaning every 3-4 days. This will ensure a healthy microclimate and prolong the life of your smart device. Frequently Asked Questions (FAQ) Can I wash the Xiaomi humidifier in the dishwasher? categorically not recommended. High temperatures and aggressive detergents in the dishwasher can deform plastic parts, damage the seals and destroy the structure of the ultrasonic membrane. Wash only manually. How often should I change the water in the humidifier in the dishwasher? It is recommended that the water is used in the water is used daily for cleaning water, even after the water is used in the water from the water in the water, even the water in the water before the water is used in the water is used in the water is used in the water. You probably didn't flush the device well after using the cleaning products (acid or vinegar). You need to pour clean water again, turn the device on for 10-15 minutes in a well-ventilated room to weather the residue of the smell, then drain the water. Can you add essential oils to the water tank? In the usual ultrasonic humidifiers Xiaomi (if there is no special compartment for flavoring) drip oil. They destroy the plastic of the tank and clog the pores of the membrane, disabling the device. Use only special flavors or models with separate purposes of the water. If the device does not start the container, if the device is completely cleaned, the water, the device can not be used before the water. Let him stand off for a few more hours.