How to change the code on the suitcase Xiaomi: 3 proven ways

Why Change the Code on Xiaomi’s Suitcase and When You Need to

Xiaomi’s smart suitcases (Mi Travel, 90Fun or Mi Smart Luggage) are equipped with electronic locks with a digital code that protects your belongings from unauthorized access, but over time, you may need to change your standard password – for example, if you bought a used suitcase, forgot the combination or want to install a more reliable code.

Unlike mechanical locks, electronic systems require careful code change, and errors in the process can block access to a suitcase indefinitely, and in this article we will discuss all official and alternative ways to reset passwords, as well as how to avoid typical problems.

Important: If your Xiaomi suitcase is synced with the Mi Home app, some features (such as remote unlock) may depend on the device's firmware version.

Method 1: Change the code through the standard lock menu

This is the simplest method that works on most Xiaomi Mi Travel models.It doesn’t require you to connect to an app or computer, but it does require knowing your current password.

Instructions:

• 🔢 Enter the current code on the padlock bar and press the confirmation button (usually marked with a tick or a button). OK).
• 🔧 Hold the M (or Menu) button for 3-5 seconds until you hear a beep.
• 🔄 A flashing symbol will appear on the screen, which means that the device is ready to enter new code.
• 🔐 Enter a new combination (usually 3-6 digits) and confirm it with a second press. OK.

If the lock does not respond after these actions, check:

• 🔋 Battery level (at a charge below 10%, the function may be blocked).
• 📱 Compatibility of the model with your firmware version (relevant for suitcases 2021-2023).

💡

If the lock emits a double beep when you enter the code, it means an error. Try entering the combination more slowly, with a pause between the numbers.

Method 2: Reset the code through the Mi Home app

If you sync your suitcase to your Xiaomi account, you can change your password through the Mi Home app, which is suitable for Bluetooth or Wi-Fi-enabled models (such as the Mi Smart Luggage Pro).

Step-by-step:

1. Open Mi Home and select your suitcase from the device list.
2. Go to Settings → Security → Change the lock password.
3. Enter the current code, then a new one (length from 4 to 6 digits).
4. Confirm the change via SMS or email (if two-factor authentication is enabled).

⚠️ Note: If the suitcase does not appear in Mi Home, check it out:

• 📶 Internet connection (for cloud synchronization).
• 🔄 Application updates (older versions may not support new models).
• 🔌 The state of the lock battery (when discharged, the connection with the application is cut off).

Method 3: Hardware reset (if you forget the code)

If you don't remember your current password, you'll have to reset the lock completely, which doesn't work on all models and may require disassembling the suitcase.

Instructions for Mi Travel and 90Fun:

1. Remove the back cover of the lock (usually attached to 2-4 screws under the cross screwdriver).
2. Find a small Reset button (can be hidden under a rubber plug).
3. Press and hold it for 10-15 seconds until the indicator blinks.
4. Enter the standard code 0000 or 1234 (depending on the model).

⚠️ Note: On some models (e.g. Mi Smart Luggage 2023), a hardware reset blocks access to the feature GPS-After the procedure, you will have to re-attach the suitcase to your Xiaomi account.

Common Mistakes and How to Avoid Them

Even when following the instructions, users often encounter problems.

• 🔋 Battery discharge: If the indicator on the lock is not on, replace the battery (usually CR2032).
• 🔍 Incorrect code entry: Some models lock for 5 minutes after 5 wrong attempts.
• 📱 Mi Home Issues: Make sure your Xiaomi account is not blocked (check email for notifications).
• 🔧 Mechanical breakdown: If the lock does not respond to pressing, the contact group may be damaged.

If the lock is released after resetting, it will give an E1 or E2 error, it means:

• E1 is an incorrect format for new code (e.g., less than 3 characters).
• E2 is an internal memory error (reset required).

💡

Before changing the code, always check the battery level - at a discharge below 15%, the lock can reset the settings to the factory.

What to do if nothing helps

If all methods are exhausted, and the lock still does not work, contact the Xiaomi service center. In Russia and CIS countries, official support is provided by partner centers (the list can be found on the mi.com website in the "Service" section).

Prepare before your visit:

• 📄 Check or warranty card (if the suitcase is warranty).
• 🔑 Spare mechanical key (if any).
• 📱 Smartphone with Mi Home installed and account data.

The cost of repairing the castle in the service:

⚠️ Warning: Do not try to open the lock by force - this can damage the locking mechanism of the belts and cancel the warranty.

FAQ: Frequent questions about changing the code on Xiaomi suitcases