How to change the voice of a robot vacuum cleaner Xiaomi on the male: all ways

Xiaomi’s robot vacuum cleaners have become an integral part of smart homes because of their functionality and convenience. However, the standard female voice assistant is not for everyone — some people want a stricter male timbre, some just get tired of the monotony. Fortunately, changing voice to a male in most models of Mi Robot Vacuum, Viomi or Dreame is quite real, although not always obvious.

In this article, we'll look at all the current methods, from official settings in the Mi Home app to alternative firmware and manual editing of system files, which models support voice change out of the box, where to download male voice packets, and how to avoid typical installation errors, and why, after updating the firmware, voice can reset to standard and how to prevent this from happening.

What Xiaomi Robot Vacuum Models Support Voice Change?

Not all Xiaomi devices allow you to change the voice of the assistant, depending on the firmware version, regional binding, and even the hardware platform.

• 🔹 Official support: Mi Robot Vacuum-Mop 2 Pro, Dreame Bot Z10 Pro, Viomi V3 And the newer ones have a built-in voice change option in the app. 2-3 variants (including male variants).
• 🔹 Partial support: Devices based STM32 (For example, Mi Robot Vacuum 1S) Requires manual file replacement through ADB third-party.
• 🔹 No support: Older models (Mi Robot Vacuum 1 2016) and budget versions (Mi Robot Vacuum-Mop Essential) do not allow you to change your voice without flashing it over.

To determine exactly what compatibility is, check the firmware version in the Mi Home app along the way Device → Settings → Device About. If there is a drop-down list in the Voice Packages section, you're in luck. If not, you'll have to use alternative methods.

The official way: change voice through the app Mi Home

If your model supports voice change out of the box, it's only a minute long. Here's a step-by-step instruction:

1. Open the Mi Home app and select your robot vacuum cleaner.
2. Go to Settings → Voice settings (or Sound and Voice, depending on the version of the app).
3. Find the Voice Package section and tap it.
4. In the drop-down list, select a male voice (usually denoted as Male, Male, or Voice 2).
5. Confirm the change and wait for the new package to load (you may need to restart the device).

After the changes are applied, the robot must voice the new greeting in a male voice.

• 🔄 Update the Mi Home app to the latest version.
• 🌍 Make sure the region in the app matches the region of your device purchase (e.g. China or Europe).
• 📱 Reconnect the robot to the app if the option doesn't show up.

💡

If there is no male voice on the list, try changing the device region in Mi Home to China, which sometimes opens up additional options.

Unofficial methods: manual replacement of voice files

For models without official support, you will have to resort to manual methods, the most reliable is replacing files through ADB (Android Debug Bridge), which is suitable for robots based on Linux or Android Things, such as Mi Robot Vacuum 1S or Viomi V2.

You'll need:

• 💻 Computer with installed ADB and drivers.
• 🔌 USB-cable (usually Micro-USB or Type-C).
• 📁 Voice packet in.pak or.wav format (can be found on forums) 4PDA Xiaomi Community).

Instructions:

1. Download the archive with a male voice (for example, from here - replace it with the current link).
2. Connect the robot to your computer and activate debugging mode: Adb devices If the device doesn’t show up, install drivers for Rockchip or Allwinner (depending on the processor).
3. Copy voice files into the folder of the robot: adb push male_voice.pak /mnt/udisk/voice/
4. Install File Rights: Adb shell chmod 644 /mnt/udisk/voice/male_voice.pak
5. Reboot the robot with the command: adb shell reboot

Download ADB Tools from the official website|Install drivers for your robot model|Download a voice packet for a specific firmware|Create a backup copy of original files|Connect the robot to the PC in debugging mode-->

Important: Not all voice packets are compatible between models. Installing files from Viomi V3 on Mi Robot Vacuum 1S can cause system failure or total loss of sound.

Alternative software firmware: Valetudo and others

If the official and semi-official methods didn't work, the radical option is custom firmware, the most popular being Valetudo, an open alternative to Xiaomi's proprietary software, which not only allows you to change your voice, but also gives you full control over your device without cloud-based binding.

The advantages of Valetudo:

• 🎤 Support for custom voice packets (including male voices in different languages).
• 🔒 No dependency on Xiaomi servers – the robot works locally.
• 🛠️ Advanced cleaning settings, maps and zones.

How to determine:

1. Download Valetudo firmware for your model from the official website.
2. Unpack the archive and follow the instructions for your device (usually you need to connect via SSH or USB).
3. After installation, go to the Valetudo web interface (usually at the address). http://[IP_robot]).
4. In the Voice Packs section, download the male voice pack (.zip or.tar.gz format).

Cons of the method:

• ⚠️ Loss of warranty (if the device is under warranty).
• ⚠️ Risk of firmware errors (recommended backup of original software).
• ⚠️ Some features (e.g. Mi Home integration) may stop working.

Where to download male voice packs for Xiaomi?

Xiaomi’s official voice packs are only available through the Mi Home app, but you’ll need files from the community for manual replacement or custom firmware.

When downloading, pay attention to:

• 📌 Firmware version: Voice package for Mi Home 3.5.6 may not work on 4.1.2.
• 📌 Language: Some packages contain only English or Chinese male voice.
• 📌 Reviews: Check other users’ comments – if there are any bugs (such as cropping phrases or distortions).

💡

Before installing third-party voice packets, always check them for viruses – some archives from questionable sources may contain malicious code.

Frequent problems and their solutions

Even after successful voice replacement, users are experiencing problems, and here are the most common ways to fix them:

⚠️ Warning: If the robot stops voicing commands or squeaks after the change of voice, it's likely that the voice packet file is corrupted. ADB: adb push original_voice.pak /mnt/udisk/voice/

• 🔇 Voice reset after update: Firmware overwrites user files.The solution is to disable auto updates in Mi Home or use Valetudo.
• 🗣️ Voice interrupted or distorted: The problem is file bitrate.Recode packet at 16kHz, 16 bits, mono using Audacity.
• 🔄 Robot does not respond to commands: Reset to factory settings (Settings) → Reset) and repeat the setting of the voice.

If none of the methods worked, check:

• 🔌 Connecting the speaker (possibly the plume has departed).
• 📱 Compatibility of firmware and voice package (the forums have compatibility tables).
• 🔊 Volume level in the robot settings (sometimes reset by 0%).

Safety and Risks of Changing Voices

Any manipulation of the robot vacuum system files carries potential risks.

⚠️ Note: Installing informal voice packets on a closed-loader model (e.g. Mi Robot Vacuum-Mop 2 Lite) may result in the device being locked, requiring a call to the service center to unlock via the device. EDL-regime.

Main risks:

• 🚨 Loss of warranty: Any changes to the software will void Xiaomi's warranty obligations.
• 🚨 Unstable operation: Incompatible voice packets can cause freezes or reboots.
• 🚨 Security vulnerabilities: Castom firmware (such as Valetudo) requires ports to be opened, which can be exploited by hackers.

How to minimize the risks:

• 🔒 Use only verified file sources (official repositories, trusted-distribution) 4PDA).
• 📥 Backup your original files before replacing them: adb pull /mnt/udisk/voice/./voice_backup/
• 🔄 Reverse to the standard voice before contacting the service center.

FAQ: Answers to Frequent Questions