How to use Xiaomi brush: the complete guide

Electric toothbrushes from Xiaomi

First of all, you have to take the device out of the package and look carefully at the components, and usually the handle itself, one or two interchangeable nozzles, and a magnetic interface charging cable are in the box, and it's important to check the integrity of the silicone plug that protects the charging port from moisture, because this element ensures waterproof housing.

Before the first switch on, be sure to remove the transport cap from the bristles, if any. Some models come with a protective cover that can block the sensors or simply interfere with the movement of the head. After that, it is recommended to fully charge the device, even if the indicator shows the presence of energy, to calibrate the power controller.

The activation process takes only a few minutes, but requires attention to detail.If you plan to use smart features and cleaning statistics, you'll need a smartphone with the Mi Home or Xiaomi Wear app installed.Without a phone connection, the brush will also work, but you'll lose access to personalized settings and timers.

⚠️ Warning: Do not attempt to charge the brush if the charging port or contacts are wet. Wash them thoroughly with dry cloth before connecting the cable to avoid corrosion or short circuiting.

Modern models like the Mijia T500 or Soocare X3 have powerful motors that can run up to 31,000 vibrations per minute. Understanding how to control these modes is critical to comfortable use. Switching between programs is usually done with a short press on a single control button located on the body.

Long pressing is often used to turn the device on or off, as well as to activate a special mode, for example, to clean the tongue or gums. Visual indication on the case or audible signals will help you navigate in the current state of the device. Some advanced models have a built-in display that displays the selected program and charge level.

Connecting to the application and setting up

Integration with Xiaomi’s ecosystem opens up access to detailed hygiene reports. To get started, download the Mi Home app from your smartphone’s official app store. Make sure your phone has Bluetooth and geolocation enabled, as they are essential to finding the device.

Once you log in to your account, click the add-on button in the top right corner of the interface. The app will automatically start scanning available gadgets nearby. When an image of your toothbrush appears on the screen, click on it to begin pairing.

• 📱 Make sure the brush is on and in pairing mode (usually the indicator flashes quickly).
• 📍 Allow the application to access geo-location, otherwise finding the device over Bluetooth may not work.
• 🔗 Select a region of use (it is usually recommended to put the one where you are physically located).
• 📶 Confirm the pairing code if it appears on the smartphone screen.

Once connected successfully, you can adjust vibration modes and cleaning times directly from the app menu, and there are firmware updates available that can add new features or improve engine stability, and regular updates ensure that your brush is running at maximum efficiency.

💡

If the app doesn’t see the brush for a long time, try turning off and back on Bluetooth on your phone, as well as rebooting the Mi Home app itself.

Main working regimes and management

Most Xiaomi models offer several pre-installed cleaning programs, each designed for tasks to be solved.The standard Cleanup mode provides intense vibration to remove plaque, while the Soft Cleaning mode reduces the amplitude of motion for sensitive teeth.

Mode switching is cyclical: every short click on a button changes the program. In some models, the sequence can be changed through the application, selecting only the modes that you use constantly, which makes navigation easier and allows you to move to the desired function faster.

Special attention should be paid to the tongue cleaning mode, which is present in the top models, activated by triple pressing or by prolonged holding of a button, depending on the firmware version, in which the brush vibrates at a low frequency, which is ideal for delicate processing of the surface of the tongue without a gag reflex.

Techniques for proper teeth cleaning

Using an electric brush requires changing the way you move, and unlike the manual ones, you don't have to do sweeping movements back and forth, but the main task of the user is to just slowly move the head from tooth to tooth, allowing the bristles to do the job themselves.

Start brushing from the outer surface of your teeth, with your brush at a 45 degree angle to the gum line. Linger on each tooth for about 2-3 seconds, then smoothly move on to the next tooth. Clean the inner surface in a similar way, making sure that the bristles penetrate the interdental spaces.

• 🦷 Don’t push too hard on your brush: Modern models are equipped with pressure sensors that signal excessive force.
• ⏱ Watch the built-in timer: the brush will pause every 30 seconds, you move to the next quadrant of the jaw.
• 💧 Use a small amount of water to wet the bristles before applying the paste.
• 🚫 Avoid sudden movements of the wrist, drive the brush smoothly and slowly.

Many users make the mistake of thinking that the harder you press your brush, the cleaner your teeth will be. In fact, it causes rapid wear and damage to the enamel. Xiaomi's brush pressure sensor is specifically designed to reduce the rate of vibration or sound if you press the device too hard to your teeth.

Care, cleaning and replacement of nozzles

To maintain hygiene and durability, the device must be regularly cared for, after each cleaning, remove the nozzle and thoroughly rinse it under a stream of warm water, which will prevent the accumulation of toothpaste residues and bacteria at the joint of plastic and bristles.

The handle should also be wiped with a wet cloth, especially in the lower part, where moisture can accumulate. Despite the high class of moisture protection, it is not recommended to immerse the device completely in water or wash it under a strong shower pressure, as this can disrupt the seals' tightness over time.

⚠️ Never use hot water (above 40)°C) for washing the nozzle or case: high temperatures may deform plastic elements and damage the bristles adhesive joint.

An important aspect of operation is the timely replacement of replacement nozzles. Manufacturers recommend changing them every 3 months or earlier if the bristles begin to lose color (in models with a wear indicator) or disintegrate. Using a worn nozzle reduces the efficiency of cleaning and can injure the gums.

The Mi Home app can be used to set up a reminder to replace the nozzle, track the time of use and notify you when it is time to buy a new kit, and the original Xiaomi and Soocare nozzles have a special form of attachment, so third-party counterparts may not fit or work properly.

Battery charging and maintenance

The autonomy of modern Xiaomi brushes varies from 18 to 30 days depending on the model and the intensity of use. Charging is carried out through a magnetic cable that comes with the kit. USB-connector to any 5V power source (smartphone adapter, Power Bank, computer) and attach a magnetic tip to the contacts on the handle.

The charge indicator located on the case will help monitor the battery status. During charging, the indicator usually flashes, and when fully charged, it lights up with even light or goes out. The full charging cycle takes about 4-8 hours, so it is most convenient to put the device on charge overnight.

• 🔋 Do not allow the battery to be completely discharged to zero: try to put the brush on charging when the indicator starts flashing red.
• 🌡 Store the device at room temperature: extreme cold or heat is harmful to a lithium-ion battery.
• 🧼 Keep contacts clean: oxidation of contacts can lead to charging problems.
• 🔌 Use cables with a current of at least 500 mA for normal charging speeds.

If you plan to stay away from a brush for a long time (like going on a month's vacation), charge it to about 50-60% and store it in a dry place.

💡

The optimal charge level for long-term storage of a lithium-ion battery is 50-60%.Do not leave the device completely discharged or fully charged for several months.

Frequent problems and their solution

During operation, users may encounter various nuances of the device, most often the issues are reduced operating time from a single charge or problems with connecting to a smartphone, in most cases these situations are solved by simply restarting the device or re-pairing.

If the brush has stopped vibrating with the same force, check if the nozzle is tightly installed. A weakened fastener can dampen the vibration. It is also worth making sure that there is no water or toothpaste between the handle and the nozzle, which can create additional resistance.

Compliance with simple rules of operation and regular care will allow your Xiaomi smart brush to serve faithfully for many years, ensuring the perfect cleanliness and health of your teeth. Remember that the technological performance of the device requires careful attention, but in return gives comfort and confidence in each use.

💡

For plastic stain removal, use a soft toothbrush with a small amount of baking soda – this safely and effectively returns the original white color.