How to use Xiaomi robot vacuum cleaner with wet cleaning: from setup to care

Xiaomi’s wet cleaning robots have become indispensable tools in modern homes, combining efficient dry cleaning with delicate floor cleaning. However, many users are faced with questions about how to install a wipe correctly, what modes to choose for different coatings, and how to avoid laminate or parquet divorces. This article will take a look at all the nuances from the first inclusion to advanced features in the Mi Home app that will help optimize cleaning for your needs.

The wet cleaning model (such as the Xiaomi Mi Robot Vacuum-Mop 2 Pro or DreameBot W10) is more careful than a regular vacuum cleaner, and it’s important not only to set your schedule well, but also to understand how the water dosing system works, what detergents are safe for the machinery, and how to avoid common mistakes like overwatering or clogging pipes. We’ve compiled expert recommendations that will save you time and prolong your life.

Preparing a robot vacuum cleaner for the first cleaning

Before the first launch, you need to follow several mandatory steps, even if the device is already partially charged. Start by unpacking and checking the configuration: the box must contain the robot itself, the docking station (if any), a network adapter, a wet cleaning wipe, a water tank and instructions. Xiaomi S7 or Dreame D9 models may also have an additional container for collecting dust.

First, connect the docking station to the network and set it on a flat surface against the wall, providing at least 1 meter of space on each side and 2 meters in front, which is necessary for the robot to dock properly.

• 🔋 Charge the device to 100% (the indicator on the case will change color from red to green). Full charge time is from 4 to 6 hours.
• 💧 Wash the water tank with warm water (no detergents!) and dry it. This will remove possible industrial contamination.
• 🧹 Install the main brushes and side brush (if removable) and make sure they lock with a characteristic click.
• 📱 Download the Mi Home app (for the Android/iOS) You can create a Xiaomi account if you don't already have one.

Important: if the kit is a disposable wipe (for example, Xiaomi Mi Mop 2T), it can only be used 1-2 times. For permanent use, it is better to immediately purchase reusable microfibre nozzles with antibacterial impregnation.

Installation and fastening of a wipe for wet cleaning

Incorrectly installing a napkin is one of the main causes of divorce on the floor. In Xiaomi models, the napkin is attached to the bottom of the body using Velcro or special clamps.

1. Remove the dust collector and the water compartment (usually they are fixed with latches on the sides).
2. Find on the bottom panel of the robot a metal plate with magnets - this is a mount for a napkin.
3. Spread the napkin and match its holes with the protrusions on the plate, make sure the cloth is flat, without folds.
4. Secure the napkin with Velcro or clamps (depending on the model) and it should fit tightly, but not stretch.

For models with a vibration system (for example, DreameBot W10), the napkin is attached to a movable platform.

• 🧼 Use only special wipes labeled For Vibration Mop - ordinary microfibers wear out quickly.
• 💦 Do not wet the napkin before installation: water is automatically supplied from the tank.
• ⚠️ Do not use napkins with a pile longer than 3 mm - they can block sensors.

After installation, check the mobility of the napkin: it should slide freely on the floor, not clinging to irregularities. If the robot begins to "twist" on the laminate, try to reduce the intensity of the water supply in the application settings.

Setting up wet cleaning modes in the Mi Home app

The Mi Home app allows you to flexibly adjust cleaning options, including water intensity, coating type and avoidance zones, to get started:

1. Add a robot vacuum cleaner to the app via Devices → Add a device → Quick connection.
2. After synchronization, go to the device menu and select Cleaning Settings → Wet Cleaning.
3. Set the water supply level: Low for laminate and parquet (minimum moisture); Medium for tile and linoleum (recommended mode); High for persistent contaminants (rarely used!).

In advanced models (for example, Xiaomi S7 MaxV) available additional options:

• 🔄 Double rubbing: the robot passes one section twice for better results.
• 🧽 Deep cleaning: increases the pressure of the wipe on the floor (suitable for the kitchen).
• 🚫 Avoidance zones: you can note carpets or areas where wet cleaning is not necessary.

Low water level |Divide double wiping |Use distilled water |Test the napkin after each cleaning-->

A critical nuance: if your model has an automatic lifting function of the napkin (for example, the DreameBot L10 Pro), be sure to activate it for carpeting. Otherwise, moisture can leak into the base of the carpet, causing mold.

How to properly pour water and detergents

Xiaomi’s wet cleaning system is sensitive to water and detergent quality, and using inappropriate liquids can lead to clogged pipes or corrosion of metal parts.

For models with automatic dosing function (for example, DreameBot W10), detergent is added to a separate compartment. Follow the proportions: 1 cap of the product per 200 ml of water. Excess concentration can cause a profuse foaming that will clog the filters.

⚠️ Warning: If white stains remain on the floor after cleaning, this is a sign of using hard water.Wash the tank and tubes with a solution of citric acid (1 tsp per 100 ml of water), then rinse with clean water.

After each cleaning, drain the remaining water from the tank and dry it. This will prevent the appearance of unpleasant odor and bacteria. In models with self-cleaning wipes (for example, Xiaomi Mi Mop 2 Ultra), after cleaning, the robot will automatically rinse the fabric and dry it with hot air.

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes that reduce the efficiency of cleaning or lead to breakdowns, and the most common of them are:

• 🌊 Excessive moisture: If the robot leaves puddles, reduce the water supply level in the settings or check the tightness of the tubes.
• 🧹 Ignoring dry cleaning: before wet cleaning, always turn on the vacuum cleaner mode - this will prevent smearing of dirt.
• 🔌 Late cleaning: Hair and thread are wound on the brushes and block the napkin. Clean them after every 3-4 cleanings.
• 📵 No updates: Outdated firmware can cause navigation glitches. check for updates in Mi Home → Settings of the device → Update of the PO.

Another common problem is that the robot gets lost and doesn't return to base.

• Poor visibility of the infrared docking station lighthouse (do not put it under direct sunlight).
• Low battery charge (start cleaning only at a charge of >30%)
• Changes in the layout of the room (rearranged furniture can knock the map).

💡

If the robot is constantly “stuck” in one area, apply paint tape to the problem area – this will help the sensors better recognize the obstacle.

To diagnose errors, use the cleaning log in the Mi Home app. For example, an E1 error usually means a side brush problem, and an E5 is a clog in the water supply system.

Care for a robot vacuum cleaner: cleaning and maintenance

Regular maintenance extends the life of the device and maintains the quality of cleaning.

Clean the main filter (wash under running water and dry)|Check the side brush for wound hair |Treat the wipe with an antibacterial spray |Wash the sensors with dry cloth |Update the room map in the application-->

Pay special attention to filters: Xiaomi models are usually installed HEPA-filters that require replacement every 3 to 6 months, signs that the filter is clogged:

• Reduced suction force.
• The appearance of dust in the air during cleaning.
• Increased charging time.

To clean the water tank, use a soft brush and toothbrush for hard-to-reach areas. Never use abrasives or metal objects, they will damage the antibacterial coating.

Store the robot vacuum cleaner in a dry place, avoiding direct sunlight. If the device is not in use for more than a week, remove the battery (if possible according to the instructions) and store it when charged 40-60%.

Advanced Features: Maps, Zones and Voice Control

Xiaomi's modern robot vacuum cleaners support interactive mapping, zone-dividing, and integration with voice assistants. Here's how to use this:

1. Mapping: When you first clean the apartment, the robot will map the apartment. Once completed, check it in Mi Home → Map and adjust the boundaries of the rooms if necessary.
2. Zone setting: 🟢 Cleaning areas: Select areas that need to be cleaned more often (such as near the front door). 🟡 Avoidance zones: mark places where the robot does not need to go (children's toys, wires). 🔴 Virtual Walls: Create Barriers to Restrict Access to Certain Rooms.

Voice control:

Alice.

Google Assistant

• "Alice, start cleaning the living room."
• "Okay, Google, put the vacuum cleaner back on base."

In models with cameras (for example, Xiaomi Mi Robot Vacuum-Mop 2 Pro) is available video surveillance.Robot can patrol the apartment and send notifications when motion is detected.

• Connection to 2.4 GHz Wi-Fi (5 GHz not supported)
• Set up notifications in Mi Home → Security → Alerts.

💡

Use the function "Multi-room cleaning" for large apartments: the robot will clean the rooms alternately, saving battery power.

FAQ: Answers to Frequent Questions