Xiaomi Mi Robot Vacuum Mop: instructions for operation from A to Z

Xiaomi Mi Robot Vacuum Mop has been a breakthrough in smart cleaning, combining powerful suction, wet cleaning and intelligent navigation. But even the most advanced device requires the right handling, from the first setup to regular maintenance. This article will help you understand everything from connecting to the Mi Home app to the intricacies of cleaning carpets and laminate.

Many users face typical problems: the robot gets lost in a room, leaves a divorce after washing or discharges quickly, the reasons often lie in the wrong settings or ignoring basic rules of operation, we will examine each step in detail, from unpacking the box to solving unusual situations, for example, when the Mi Robot refuses to return to base.

Particular attention will be paid to the combined cleaning mode (vacuum cleaner). + You will learn which detergents are safe for the tank, how to avoid clogging filters and why it is sometimes best to turn off the wet cleaning function for certain coatings.

Preparation for the first launch: unpacking and assembly

Before the first activation of the Xiaomi Mi Robot Vacuum Mop, you need to check the configuration and correctly install all removable elements.

• 🤖 The robot vacuum cleaner itself with the main brush installed
• 🔋 Charging base (dock station) with power supply
• 🧹 Side brush (1 pcs, spares sold separately)
• 💧 Water tank with washing napkin
• 🔧 Tool for cleaning the filter and brushes
• 📄 Short instructions in several languages (Russian may not be available)

First, you can put a side brush on the right (if you look at the robot from the front) before you click. Then check the main brush, it should rotate freely, without jamming. If you notice hair or dust in the factory, remove it with a plastic scraper from the kit.

Pay special attention to the water tank. It consists of two parts:

1. Top clean water tank (poured through the folding cover)
2. Lower compartment with microfiber napkin

⚠️ Warning: Never put abrasive particles (such as powders) or chlorine in the tank, which will clog the water supply system and damage the pumps.

Before installing the tank on the robot, make sure that the napkin lies exactly in the slots - the protruding edges can cling to furniture. 150-200 ml of water (maximum volume — 200 millimeter).

2. Connect to the Mi Home app and basic setup

To fully manage the Xiaomi Mi Robot Vacuum Mop, you need to connect it to the Mi Home app (available for Android and iOS). Download it from the official store and register (attach it to your Xiaomi account).

Connection algorithm:

1. Turn on the robot with a long press on the Power button (3 seconds). Wait for the beep.
2. In the app, click + → Addition of a device → Robot vacuum cleaner.
3. Select the Mi Robot Vacuum Mop (if it is not on the list, update the app).
4. Connect your phone to a 2.4GHz Wi-Fi network (the robot doesn’t work with 5GHz!).
5. Follow the instructions on the screen: the app will prompt you to bring your phone to the robot for scanning QR-code (under the battery cover).

After successful connection, we recommend immediately update the firmware of the robot:

• 📱 Go to the Device Settings → Firmware update.
• 🔄 If a new version is available, confirm the installation (the robot will restart).
• ⚡ Make sure the battery is charged >50%, otherwise the update will be interrupted.

💡

If the robot is not connected to Wi-Fi, try resetting it: press the Power and Home buttons for 10 seconds before the beep. After reset, repeat the connection procedure.

Setting up a cleaning schedule will help automate the process. In the app, select: Schedule → Add → Specify days/times → Select cleaning mode.

For the flat. 50-60 m2 optimally:

• 🏠 Dry cleaning: daily, power "Average"
• 💦 Wet cleaning: 2-3 once a week, the intensity is low"

3. Cleaning modes: when and how to use

Xiaomi Mi Robot Vacuum Mop offers 4 basic modes that are combined with the suction and water supply settings. The choice depends on the type of coating and the degree of contamination:

For wet cleaning, it is critical to properly adjust the water supply:

• 🌊 Low: laminate, parquet (minimum moisture)
• 💧 Medium: tile, linoleum
• 🚿 High: only for persistent contaminants on hard coatings

⚠️ Note: When cleaning carpets with pile >1 cm turn off the function of floor washing (Settings) → Regimes → Wet cleaning: Off) Water will not penetrate the pile, but may damage the pump due to increased load.

A critical mistake many users make is using ordinary tap water, and hard water leaves limestone plaque on the napkin and in the tubes, causing them to clog through the water. 2-3 Use distilled or boiled water, and add some for disinfection. 1-2 drops of glass washing products (without alcohol!).

Remove wires and small objects from the floor|Check the purity of the water tank|Set the intensity of water supply according to the coating|Close the doors to rooms where cleaning is not required|Pour no more than 200 ml of liquid-->

4. Room mapping and zoning

One of the key advantages of the Mi Robot Vacuum Mop is the system. LDS-The first cleaning must always be done in Auto mode, so the robot will remember the layout.

Once the cleaning is complete, the map will be saved in the Mi Home app, where you can:

• 🗺️ Divide into rooms: click Edit the map → Separate rooms and draw lines along the contour.
• 🚫 No-go zones: circle areas where the robot cannot go (for example, children's play mats).
• 🔄 Cleaning sequence: set the order of rooms in the Cleaning settings menu.

If the robot loses the map after rebooting or transferring to another floor:

1. Delete the saved card in the application (Settings) → Map. → Delete).
2. Move the robot and base to a new location.
3. Start cleaning in Auto mode - the card will be rebuilt for 1-2 passageway.

For multi-storey homes, buy additional bases (sold separately) and the robot will remember up to 5 floors, but you need to:

• Create a separate map for each level.
• When changing floors, manually select the desired map in the application.

5 Care and maintenance: how to extend the life of a robot

Regular maintenance of the Xiaomi Mi Robot Vacuum Mop not only improves the quality of cleaning, but also prevents breakdowns.

• 🧹 Main brush: remove the wound hair and threads, rinse under running water for severe contamination and dry for 24 hours.
• 🌀 Side brush: clean the dust and check the mount - it should rotate without backlash.
• 🔄 Filter: shake or vacuum (wash once a month, but only after drying completely!).
• 💧 Water tank: wash with warm water, remove plaque from the inner walls.
• 🛠️ Sensors: wipe with a dry napkin LDS-sensor (upper rotating "turret") and infrared sensors below.

Every one. 3-6 A deep cleaning is required for months:

1. Remove the bottom cover (4 screws) and clean the fan of dust.
2. Check the rollers-wheels, they should rotate without creaking, and if necessary, lubricate with silicone grease.
3. Replace the washing wipe (it loses absorbent properties afterward) 50-60 cleaning).

⚠️ Attention: If the robot starts to make a whistling sound when operating, it is a sign of clogging of the duct. Immediately turn it off, remove the dust collector and clean the channel with thin wire.

For the storage of the robot:

• Always put it on the base - this will prevent battery discharge.
• If you do not use for more than a week, remove the dust collector and water tank, wash and dry them.
• Store in a dry place at a temperature 10-35°C.

💡

The use of non-original spare parts (brushes, filters) reduces the resource of the robot on the basis of the 30-40%. Xiaomi’s original components have special antistatic coating and precise balancing.

Typical errors and their elimination

Even when properly operated, the Mi Robot Vacuum Mop can still produce errors.

If the robot doesn't return to base, check:

• 🔌 The base is connected to the socket (the indicator should burn in blue).
• 📏 Distance to base no more than 5 meters in a straight line.
• 🚪 No height obstacles >2cm on the way to base.
• 🔄 The base is on a flat surface (not on a carpet!).

To reset errors, use a combination of:

1. Press the Power and Home buttons for 10 seconds.
2. Wait for the beep and voice message "Reset successful".
3. Reconnect the robot to the Mi Home app.

If the robot leaves the stripes after washing, the reasons may be as follows:

• 🧺 Worn-out or improperly installed.
• 💧 Too much water (reduce the intensity in the settings).
• 🧼 Used inappropriate detergent.
• 🧽 The reservoir is contaminated (rinse with acetic solution: 1 tbsp. spoon per 1 liter of water).

7.The secrets of effective cleaning: life hacks from owners

Experienced users of Xiaomi Mi Robot Vacuum Mop share some non-obvious tips that significantly improve cleaning results:

• 🧲 Magnetic tapes: Stick them along the boards in rooms where the robot has to clean up the side of the walls, and that will make it get as close as possible.
• 🪟 Virtual Walls: Instead of buying expensive beacons, use cardboard boxes high 10-15 The robot will see them as an obstacle.
• 🔋 Charging: If the robot often does not reach the base, install it in the corner of the room - so it will "see" it from a greater distance.
• 🧹 Double Cleaning: For Perfect Cleanliness, Start Max Mode First+ (dry cleaning, and then wet cleaning car.

For cleaning carpets with long pile:

1. Turn off the floorwashing function.
2. Set the maximum suction power.
3. Run the robot 2 times in a row with an interval of 1 hour - during this time, dust will settle, which he did not pick up the first time.

If there are animals in the house, set up the robot as follows:

• 🐾 Increase the frequency of cleaning up to 2 times a day (morning and evening).
• 🐶 Use the contour mode for cleaning along the walls - there accumulates most of the wool.
• 🚫 Create no-go zones around food bowls and trays.

💡

To the robot does not scare pets, turn on the settings of the application Quiet Mode (Settings) → Voice prompts: Off. You can also turn off the LED light (Settings) → Indication: Off).

8. Frequent User Questions (FAQ)