Modern wireless vacuum cleaners from Xiaomi and its sub-brands such as Roborock or Dreame have become the standard of cleanliness in many homes. However, to make the device work as efficiently and lasts, it is not enough just to press the on button. Proper operation, timely charging and smart configuration of smart functions are key factors that are often overlooked by new owners.
In this article, we will take a look at how to use a Xiaomi vacuum cleaner to get the perfect cleaning result. You will learn about the nuances of preparing your device for the first launch, the features of working with the Mi Home application, and how to properly care for filters and batteries. This guide will help you avoid typical mistakes and prolong the life of your gadget.
Don't underestimate the importance of proper operation. Service errors can lead to rapid loss of suction power or even engine failure. First switching on and calibrating sensors are critical steps that determine the stability of the navigation system in the future. Let's look at the process Step-by-step.
Primary preparation and charging of the device
After unpacking, take your time to turn the vacuum cleaner on at full capacity.The lithium-ion batteries that come with the Mijia Vacuum series models often come with a partial charge, but for their long-term effectiveness, it is recommended to conduct a full charging cycle before first using.
Pay attention to the indicators on the case. They usually signal battery status by flashing or color. Full charging can take anywhere from 3 to 5 hours depending on the battery capacity of the particular model. During this process, make sure that the vacuum cleaner is on a flat surface and the charging base contacts are clean and dry.
While the device is charging, make a visual inspection of the components, check whether the main brush in the nozzle is installed correctly and if the dust container is reliably latched. Incorrect assembly can cause the vacuum cleaner to not start or operate with increased noise levels.
☑️ Primary training
If you lose your home unit, look for an analogue with identical voltage and current parameters, which will ensure the safety of the battery and prevent overheating.
Installation and configuration of the Mi Home application
To unlock the full potential of a smart vacuum cleaner, connect it to your smartphone. Download the official Mi Home app (or Xiaomi Home) from the AppStore or Google Play. When registering for an account, be sure to choose the correct region that corresponds to your location, as this depends on the list of available devices and the speed of the server response.
The pairing process usually happens automatically if Bluetooth is on on your phone. Open the app, click Add Device and follow the on-screen instructions. You may need to enter a password from your Wi-Fi network. Make sure your router distributes the network at 2.4GHz, as many Xiaomi vacuum cleaners models do not support the 5GHz standard.
Once connected successfully, you can not only start cleaning remotely, but also adjust your schedule, select power modes and track your cleaning history. The device’s firmware is also updated through the app, which adds new features and improves navigation algorithms.
In some cases, you may need to reset the Wi-Fi module on the vacuum cleaner itself, usually by pressing two buttons on the case (for example, the on button and the return button to the base) simultaneously for 5-7 seconds until you hear a voice message about the transition to pairing mode, this action is necessary if the device is not on the network.
Review of working and management regimes
Modern models such as the Xiaomi Robot Vacuum S10+ or Dreame L10 Pro offer a flexible suction power management system. The application and the case are usually available in four basic modes: Quiet, Standard, Turbo and Maximum.
For daily cleanliness on hard floors (laminate floors, tiles), Standard mode is ideal, balancing noise levels with fine dust collection efficiency. If you have long-pile carpets or pets molting all year round, switch to Turbo or Maximum mode, which will provide deep cleaning of carpet fibers.
- 🌿 Quiet mode: Perfect for night cleaning or when a child is sleeping at home.Noise level is minimal, but vacuum cleaner speed is reduced for better dust collection.
- ⚡ Turbo mode: Optimal choice for medium-fat carpeting, increased engine power, requiring more power.
- 🚀 Maximum power: Used for deep cleaning of highly contaminated areas. Operates very loudly and consumes battery power quickly.
Some advanced models have automatic power increase on carpets, a pressure sensor or optical sensor detects the change of coating and temporarily increases engine speed, and in the application this function can be activated or disabled in the settings.
The secret to quiet work
Configure maps and virtual restrictions
One of the most useful features of Xiaomi’s smart vacuum cleaners is to map the space. During the first general cleaning, the device scans the space using a laser rangefinder (LiDAR) or camera. Once the process is complete, the app will show an accurate plan of your apartment that can be edited.
You can divide the space into rooms, name them (Kitchen, Living Room, Bedroom) and install virtual walls. Virtual walls are invisible barriers that a vacuum cleaner cannot cross. It is an indispensable feature for protecting areas with wires, carpets that cannot be wet (if the model has a wet cleaning function), or places where a pet bowl is standing.
| Type of restriction | Function | Where applicable |
|---|---|---|
| Virtual wall | Linear barrier | Along the rapids, by the stairs |
| The no-go zone | Square area | Around animal bowls, wires. |
| Zone cleaning | Choosing a room | Cleaning the kitchen after cooking |
To fine-tune the map, it sometimes takes several cleaning cycles. If the vacuum cleaner is lost or the map is lost, the app has a Save the Card or Restore the Map function. Do not delete the saved card unless you plan to rearrange the furniture, as this will reset all the configured restrictions.
💡
Properly configured virtual walls prevent the vacuum cleaner from getting stuck and protect delicate interior items from damage.
Features of wet cleaning
Many Xiaomi vacuum cleaners support wet cleaning (2-in-1). This comes with a special module with a water tank and microfiber. It is important to understand that this is not a full-fledged floor washing, but rather a wipe to remove fresh stains and maintain freshness.
Before installing the wet cleaning module, be sure to remove the main dry garbage container if the model design requires it, or simply install a water tank on top of it. Turn on the water supply in the app by selecting one of the levels: Low, Medium or High. Laminate and parquet are recommended to have a low level to avoid swelling of wood.
⚠️ Warning: Never install a wet cleaning module if there are long-pile carpets in the room that can't be wetted and you haven't set virtual bans. Even when turned off, the microfiber can leave traces of moisture.
Use only pure tap or filtered water. Adding detergents, chlorine or flavorings to the tank is strictly prohibited, as this can lead to corrosion of internal pumps and clogging of water supply channels. After use, be sure to remove the cloth, wash it and let it dry, and the tank rinse.
Maintenance and care of filters
The durability of a vacuum cleaner depends on regularity of maintenance. The main enemy of any vacuum device is a clogged filter. Xiaomi vacuum cleaners use a multi-stage filter system that includes a pre-motor filter and a multi-stage filter. HEPA-fine-cleaner.
Premotor filter (usually mesh) can and should be washed with water as pollution, but this should be done only after thorough drying (at least not less than a few times). 24 hours). HEPA-The filter that keeps fine dust and allergens out is not cleaned in most models, and must be gently knocked out over the trash can or changed once in a while. 3-6 months depending on the intensity of use.
- 🗑️ Cleaning the container: Empty the dust container after each cleaning or when filling the indicator.
- 🧹 Brush care: Remove the main brush once a week and clean it of wound hair and thread.
- 👀 Sensors: Wash the collision sensors and laser rangefinder (turret on top) with soft dry cloth so that navigation works without errors.
Regularly checking your sidebrush is also important, because if it's worn or deformed, the quality of cleaning along the boards will deteriorate significantly, and replacing consumables is not an expense, but an investment in the cleanliness of your home.
💡
To extend life HEPA-filter, before each dry cleaning, carefully walk around the room with a regular vacuum cleaner or broom, removing large debris that quickly clogs the filter pores.
Frequent problems and their solution
Even the smartest devices can run into difficulties, and a vacuum cleaner can stop in the middle of a cleaning, make a beep, or start to rush around the room, most of which are not broken and easily solved by the user.
If the device reports a wheel getting stuck, check if the hair is wound on the axle. The "overflow container" error can occur if the filter is clogged, even if the tank itself is half empty. In case of loss of connection with Wi-Fi, check if the router password has changed or if the router is too far from the vacuum cleaner's home.
⚠️ Warning: If the vacuum cleaner makes a foreign whistle or grind, turn it off immediately. Most likely, a large object (toy, coin) or a badly worn brush bearing has hit the engine. Continued operation can lead to the combustion of the engine.
To reset errors, it is often enough to restart the device or clean the sensors. If the problem persists, the Mi Home application often produces an error code (for example, Error 4, Error 13), the decryption of which can be found in the application help or on the official website of the manufacturer.