How to use the nebulizer Xiaomi Andon: step-by-step instructions with tips

Integrated home health care has become easier with the advent of smart medical devices. Xiaomi Andon Nebulizer is a compact and technological inhaler that turns liquid medicines into a fine aerosol for effective treatment of respiratory diseases. But to make the device work as efficiently and safely as possible, it is important not only to understand its technical capabilities, but also to strictly adhere to the rules of operation.

In this article, we will take a look at everything from the first assembly and solution preparation to the care of the device, learn how to breathe through the nebulizer, what drugs can be used and what are contraindicated, and get practical tips for correcting typical problems, and pay special attention to the differences between the Andon model and classic nebulizers - for example, its smart functions and compatibility with the Mi Home ecosystem.

Set and first assembly of the nebulizer

Before first using, carefully check the contents of the box. Xiaomi Andon standard includes:

  • πŸ”Ή The main unit with compressor and control panel
  • πŸ”Ή Spray chamber (nebulizer cup)
  • πŸ”Ή Air duct
  • πŸ”Ή Mask for adults and children (sometimes two masks are included)
  • πŸ”Ή mouthpiece for oral inhalation
  • πŸ”Ή Spare filters (2-3 pcs.)
  • πŸ”Ή Network adapter and cable USB-C
  • πŸ”Ή Instructions in Chinese (Russian version is often missing)

It takes no more than 2-3 minutes to assemble. Connect the duct tube to the base of the compressor, then attach a spray chamber to it. Make sure that all connections are dense - even a small gap will reduce the efficiency of inhalation by 30-40%.

πŸ“Š You have already used smart medical devices?
Yeah, nebulizer.
Yes, another device (tonometer, glucometer)
No, it's my first experience.
Planning to buy

Note the power button -- in the Andon model, it's combined with touch control. Long press (3 seconds) turns the device on/off, short press switches spray modes (if supported by your modification). LED-an indicator that signals a low level of the drug or a clogged filter.

Preparation for inhalation: what solutions can be used

Xiaomi Andon nebulizer is compatible only with special solutions for inhalation, which are sold in pharmacies.

  • 🚫 Self-cooked decoctions of herbs (plant particles clog the sprayer)
  • 🚫 Essential oils (can cause lipoid pneumonia)
  • 🚫 Cough syrups (sugar crystallizes in the mechanism)
  • 🚫 Tablets crushed into powder (uneven spraying)

Acceptable drugs are divided into several groups:

Type of drugExamplesAppointment
BronchodilatorsBerodual, SalbutamolRemoval of bronchospasm in asthma
MucolyticsAmbroxol, LasolvanLiquefying sputum
AntisepticsMiramistin, FuracilinDisinfection of the respiratory tract
HormonalpulmicortRemoving inflammation in allergies
Saline solutionNaCl 0.9%Moisturizing the mucosa, diluting the drugs

Important: Xiaomi Andon does not support inhalation with suspension-based drugs (for example, Hydrocortisone in suspension), this is due to the peculiarities of membrane spraying technology - the particles of the suspension can damage the mesh filter. Always check with your doctor the compatibility of the prescribed drug with mesh nebulizers.

Dosing the drug strictly according to the doctor's prescription|

Bring the volume to 4-5 ml saline solution (if necessary)|

Heat the solution to room temperature (not higher than 30)Β°C)|

Pour into the spray chamber and immediately start the procedure-->

Inhalation technique: step-by-step guide

The effectiveness of treatment depends not only on the drug, but also on the correctness of the procedure.

  1. Preparation: Take a comfortable seating position. If you use a mask, make sure it fits tightly to your face (for children, fasten your seat belts).
  2. Turn on: Press the power button and wait for a steady flow of aerosol (usually 10-15 seconds).
  3. Breathing: πŸ’¨ For diseases of the nose (hymoritis, rhinitis): breathe calmly through the nose, the mouth is closed. πŸ’¨ With cough or asthma: a deep breath with the mouth β†’ respiratory delay of 2-3 seconds β†’ nose-out.

Duration:

fluidity

Andon has an automatic shutdown timer after 20 minutes of continuous operation, which is overheating protection, but in practice, you rarely inhale more than 10 minutes.

  • πŸ”‹ Battery charge (if portable mode is used)
  • πŸ’§ Level of medication in the cell
  • πŸ”Œ The density of the tube-compressor connection

πŸ’‘

If your child is inhaling, play your favorite cartoon on your tablet, which will help him sit quietly for 10 minutes, as long as the screen is at least 1.5 meters away from his face during the procedure.

Care and cleaning: how to prolong the life of a nebulizer

Hygiene failure is the main cause of nebulizer breakdowns. Xiaomi Andon requires cleaning after each use and deep disinfection once a week.

Wash the spray chamber and mask with warm water (without detergents)|

Dry the parts on a clean towel (do not use a hair dryer!)|

Wipe the air duct tube with a napkin with an antiseptic|

Store the device in a dry place in disassembled form-->

For disinfection, suitable:

  • 🧼 Special solutions for nebulizers (Septodont, Lysoformin 3000)
  • 🧼 Boiling (for plastic parts only, no more than 5 minutes)
  • 🧼 Steam sterilizer (if specified in the instructions)

⚠️ Warning: Never use vinegar, alcohol or abrasive sponges to clean. Acids destroy the membrane of the sprayer, and alcohol can damage plastic seals, leading to leakage of the aerosol.

Filters at the base of the compressor need to be replaced every 3-6 months (depending on the intensity of use), Andon comes with spare filters, which can be ordered separately through the Mi Store or from official distributors, Signs that it is time to change the filter:

  • πŸ”Š Increased noise of the compressor
  • ⏳ The procedure took longer with the same amount of medication.
  • 🌫 Seen gray raid at the exit of the aerosol

Compatibility with the Xiaomi ecosystem: smart features

One of Andon’s key advantages over classic nebulizers is integration with the Mi Home app. Once connected via Bluetooth (instruction below), you get access to additional features:

  1. Remote control: Turning on / off the device from the smartphone.
  2. Procedure statistics: Fixing the time, duration and drugs used.
  3. Reminders: Notifications of the need to clean or replace the filter.
  4. Spray modes: Select particle size (e.g., 1-3 ΞΌm for the lower respiratory tract or 5-10 ΞΌm for the nose).

To connect the nebulizer to the Mi Home:

  1. Install the Mi Home app on your smartphone (available for Android and iOS).
  2. Sign up or sign in to your Xiaomi account.
  3. Click Add Add the device β†’ Health β†’ nebulizer.
  4. Hold the power button on the device for 5 seconds until the indicator blinks.
  5. Confirm the connection in the application.
How to reset the nebulizer to factory settings?
If the device is no longer synced with the Mi Home or is not working correctly, reset: Turn off the nebulizer. Press the power button for 10 seconds until the indicator flashes red. Release the button, the device will return to factory parameters. After reset, you will need to reconnect to the application.

Note that the smart features are only available in the latest firmware versions.

  1. Open Mi Home and select your nebulizer.
  2. Go to Settings β†’ Update firmware.
  3. If a new version is available, click Update and wait until it is completed (the device must be connected to the network).

Typical malfunctions and ways to eliminate them

Even with careful care, there can be disruptions. Consider the most common problems and their solutions:

Problem.Possible causeDecision
Not included.Battery discharged / cable damagedCheck charging, try another cable USB-C
Weak aerosol flowClogged filter or sprayerRinse the camera, replace the filter
The device is turned off in 1-2 minutesOverheating or sensor malfunctionLet it cool for 30 minutes, check the vents
Not connected to Mi HomeOutdated firmwareUpdate the software through the app
Heavy noise at workWear of the compressor or weakened fastening of partsCheck the density of connections, contact the service

⚠️ Note: If after cleaning and resetting the settings, the nebulizer continues to work incorrectly (for example, does not spray the medicine or makes extraneous sounds), do not try to disassemble the compressor yourself. Andon uses a vacuum-insulated sealed case, which will result in a loss of warranty.

For the diagnosis of malfunctions, you can use the built-in self-check:

  1. Turn off the device.
  2. Press the power button for 3 seconds, then release and immediately press again.
  3. The indicator will start to flash in a certain sequence: 🟒 1 time - the device is working properly 🟑 2 times – cleaning of the sprayer is required πŸ”΄ 3 times - failure of the compressor

Comparison with other nebulizers: is it worth overpaying?

The price of Xiaomi Andon (about 5-7 thousand rubles) is higher than that of classic compressor nebulizers (2-4 thousand).

CharacteristicsXiaomi AndonClassic compressorUltrasonic.
Type of sprayMesh technology (electronic grid)compressorUltrasound
Noise30-40 dB (quiet)50-60 dB40-50 dB
Particle size1–5 ΞΌm (adjustable)3-10 ΞΌm1-3 ΞΌm
Compatibility with drugsEverything except suspensionsAll typesViscosity restrictions
Smart functionsMi Home, statistics, remindersNo.Rarely.

Conclusion: Andon is justified if you care:

  • πŸ“± Smart home integration and smartphone control
  • πŸ”‡ Silent work (relevant for inhalation of children at night)
  • 🎯 Accurately adjusting particle size for different diseases
  • πŸ’§ Ability to use hormonal drugs (unlike ultrasound)

If you need a budget option for rare use (for example, 1-2 times a year for colds), a classic compressor nebulizer will be a more economical choice.

πŸ’‘

Mesh technology in Xiaomi Andon allows you to spray up to 90% of the drug (against 50-70% in compressor models), which speeds up recovery and saves drugs.

FAQ: Frequent questions about the Xiaomi Andon nebulizer

Can I use mineral water for inhalation?
No, mineral water (even without gas) is not sterile and contains microparticles that can damage the membrane of the sprayer. Use only a pharmacy saline solution (NaCl 0.9%) to moisturize the mucosa.
How long does the spray chamber last?
The manufacturer claims a lifespan of 500 treatments (about 2-3 years with moderate use), but with daily inhalations, the membrane may wear out earlier, signs of replacement: increased spraying time or the appearance of large droplets in the aerosol.
Can I inhale at a temperature?
At temperatures above 37.5Β°Vapour inhalation is contraindicated, but cold aerosol from the nebulizer is allowed, except for severe conditions (such as bacterial pneumonia), when the procedure must be prescribed by a doctor.
How to transport a nebulizer on trips?
For transportation: Pour the residues of the medicine out of the cell. Pack the parts in the original bag or container with a pad. Remove the battery (if the model is portable); store the accessories (mask, tube) separately in the bag. Avoid temperature changes - do not leave the device in the trunk of the car in winter.
Is Andon suitable for inhalation with antibiotics?
Yes, but only with those that are approved for nebulizer therapy (for example, Fluimucil-antibiotic IT).Be sure to consult your doctor before using - some antibiotics lose their effectiveness when sprayed.