Owning high-quality clothing made of natural or mixed fabrics inevitably confronts the owner with the problem of forming reels. The Xiaomi Mijia electric machine has become a popular solution for quickly restoring the appearance of things, but many users do not know all the nuances of its operation. Proper handling of the device prolongs the life of both the device and the fabric being processed, ensuring the perfect result from the first time.
The device is a compact gadget with an ergonomic shape that works from an integrated battery. Xiaomi Mijia Ball Remover features a high speed of rotation of knives and the presence of a protective net that takes care of the structure of fibers. Unlike cheap counterparts, this model does not “eat” the fabric, but carefully cuts the pile, collecting it in a special container. Understanding the principle of rotational blades will help you avoid common mistakes and keep your favorite sweaters in their original form.
Before you start removing the pile, you need to make sure that the device is fully charged and ready to go. Many people ignore the preparation stage, which leads to reduced engine efficiency and uneven haircuts. In this article, we will discuss in detail how to use the device correctly, how often you need to clean the knives and what to do if the device is no longer able to cope with its task.
Preparation of the device for the first launch
The first thing to do after unpacking is to fully charge the battery. Although the device can be operated on residual charge, it requires a full charge cycle to calibrate the battery and reach full power. The indicator on the Xiaomi Mijia body usually flashes during charging and burns with even light at full charge. Using a device with a discharged battery can cause the motor to rotate at a lower speed, which will reduce the quality of cutting the coils.
The second important step is to check the installation of the pile collection container, which should fit tightly to the body and give a characteristic click when it is fixed. If the container is installed incorrectly, the safety system may not activate the engine, or the villi will fly around the room. Make sure that the safety net does not have dents and deformities that may have occurred during transportation.
⚠️ Warning: Never attempt to start the device if the safety net is damaged or removed.Sharp blades inside can injure the skin or damage tissue without proper protection.
To activate the device, you usually use a button on the body, which you must hold for 1-2 seconds, this prevents accidental switching on in your pocket or bag, and after starting, you will hear a smooth hum of the running motor, which indicates that the mechanism is working.
☑️ Pre-launch check
Technique for removing coils from various tissues
The efficiency of the work depends on the technique of movement and the type of fabric being processed. For dense materials such as jeans, coat coats or tight knitwear, you can use a standard mode of operation. Move the machine in smooth circular movements or progressively along the pile, slightly pressing the device to the surface. Do not press too hard: the weight of the gadget is enough to effectively cut the pile, and excessive pressure can damage the fabric structure.
With delicate fabrics such as cashmere, thin wool or synthetic fleece, you should be extremely careful. In such cases, it is recommended to pull the fabric with the second hand to create a smooth surface, but not to drag it. Xiaomi Mijia is equipped with a protective net with small holes that only the coils of a certain size pass, but the risk of tightening the threads still exists if used improperly. Movements must be light and fast so that the blades do not have time to capture the main thread.
- 🧶 For wool and cashmere, move the machine strictly in the direction of the pile, so as not to grind the product.
- 👖 For tight cotton and jeans, circular movements are allowed for more thorough handling.
- 🧣 Synthetic fabrics (fleece, polar) require minimal pressure and short passes.
Moisture can get inside the case, causing metal parts to corrosion or electronics to short circuit. If you've just washed a thing, wait for it to dry completely before using the device.
💡
Before handling the whole thing, test on an inconspicuous area (such as an inner seam) to make sure the machine does not damage the tissue structure.
Blade cleaning and maintenance
Regular cleaning is the key to a long and efficient operation of your fabric trimmer. After each treatment, it is recommended to empty the container for collecting the pile. If left full, this will create additional resistance to airflow and can lead to overheating of the motor or a decrease in suction capacity.
For deep cleaning, you need to remove the protective netting. In most Xiaomi Mijia models, this is done by turning the netting counterclockwise or by lightly pressing the locks. Removing the netting will give you access to the cutting unit. Carefully remove the accumulated villi with a soft brush (usually included) or a dry toothbrush. Pay special attention to the area around the axis of rotation, where fine dust is often clogged.
| Type of pollution | Cleaning method | Frequency |
|---|---|---|
| Full container | Devastation and dry-cloth wipe | After each use |
| Worth on blades | Cleaning with a soft brush | Once in 3-5 uses |
| Filamentation | Careful removal with tweezers | As necessary |
| Dust in the machine | Blowing or dry brushing | Once a month |
It is strictly forbidden to wash the cutting unit under a stream of water or use chemical solvents. Metal blades can rust, and the lubricant applied by the manufacturer to the bearings will be washed away, which will lead to rapid wear and noise.
What to do if the blades are blunted?
Charging and battery operation
Autonomy is one of the key advantages of the Xiaomi model: the built-in battery usually provides about 60 minutes of continuous operation, which is enough to handle a large number of clothes, charging is carried out through a Micro-USB or Type-C port (depending on the specific modification of the year of release), located on the bottom of the case or hidden under a decorative stub.
Use a cable from the supply kit or any quality cable with the appropriate connector to connect. It is recommended to use power adapters with a current of no more than 1A to avoid overheating of the battery. The charge indicator will help control status: flashing light usually signals the charging process, and permanent light - about full charge. If the indicator does not light up, check the contact of the cable and the purity of the charging port.
It is recommended to store the device with a charged battery (about 50-70%), especially if you do not plan to use it for a long time. A complete discharge of the lithium-ion battery to zero can lead to its deep discharge and loss of capacity, as a result of which the device will cease to turn on.
Removal of faults and noise
In the process of operation, users may experience a change in the sound of the device, if the machine begins to hum louder than usual or there is a creak, first check the purity of the blades. Often the cause of noise is wound threads or villi, which create an imbalance when rotating. Careful brushing in 90% of cases eliminates the problem.
If the device works but doesn't cut the coils, there are two options: either the blades are blunted or the net press is loosened. Check if the protective grille is tightly twisted. Sometimes the thread can weaken as it works, and the mesh stops fitting tightly to the blades, which prevents the pile from entering the cutting area. Carefully twist the mesh, but don't drag it over so that the plastic thread doesn't break.
⚠️ Warning: If, after cleaning and checking the mounts, the device emits a discontinuous sound or spontaneously turns off, this may indicate a malfunction of the battery or motor.
In rare cases, the problem may be caused by engine locking due to large debris, in which case the device may produce a characteristic crackle, immediately turn off the gadget and conduct a visual inspection of the cutting unit.
Replacement of blades and consumables
The cutting unit's resource is limited. Even the best alloys wear out over time. You can see that it's time to replace them by reducing efficiency: the machine starts to burn the fabric, leave long pile tails or require multiple passes in one place. For the Xiaomi Mijia, there are original and compatible replacement heads that include both a grid and knives.
The replacement process is extremely simple and requires no tools. First remove the pile container, then unscrew the old cutting head (usually it is removed by turning or lightly upward, depending on the design of the particular version). Install a new unit, making sure that it has stood in place without skewing, and return the container to its place. After replacing it is advisable to wipe the new blades with dry cloth to remove possible factory lubrication or dust.
- 🔍 Buy replacement units only from trusted sellers, paying attention to compatibility with your model.
- 🛡️ Change the net and blades kit as they wear out synchronously.
- 🗑️ Old blades dispose carefully so as not to cut on sharp edges.
Timely replacement of consumables allows you to extend the life of the device itself, since worn blades create an increased load on the electric motor, forcing it to work at the limit of possibilities.
💡
The average life of the cutting unit with active use is about 6-12 months, after which replacement is recommended to maintain the quality of the haircut.