Oral hygiene is taking on new dimensions with the advent of portable devices, and Xiaomi Soocas W3 or newer W1, W3 Pro models are becoming the standard of quality. Unlike dental floss, a pressurized water jet is able to flush out food debris from hard-to-reach areas without injuring the gums when used properly. Many users purchase Mijia ecosystem gadgets but face the difficulties of first tuning and choosing the optimal mode of operation.
In this article, we will take you through all the nuances of operation, from the first charge to deep cleaning, how to connect the device to a smartphone to track statistics, which nozzles to choose for sensitive teeth, and why regularity of procedures is more important than maximum jet pressure. Video instructions built into the text will help visualize the process of assembly and maintenance.
It's worth noting that Soocare (often called Soocas) offers several modifications, and the management of them may vary slightly. However, the basic principles of hydrodynamic cleaning remain the same throughout the line, and it's important to properly prepare the device for the first run to avoid air entering the system and ensure that the pump runs smoothly.
Primary preparation and activation of the device
Before you turn on a portable irrigator, you need to do a number of preparatory manipulations. The device comes with a partially discharged battery, so the first step should always be to fully charge. Use the cable from the kit, connecting it to the adapter with a current of no more than 2A, so as not to damage the power controller.
Once connected to the grid, the indicator will flash, signaling the process of energy storage. Full charging usually takes about 4 hours, after which the light indicator will stop pulsating and will burn with even light. Do not ignore this stage, as working a lithium-ion battery in a deep discharge can reduce its life.
Next, the tank is prepared. Remove the flask, rinse it with warm water and fill it up to the MAX mark. Hot water is strictly prohibited, as it can deform the plastic and damage the seals. To achieve better antibacterial effect, you can add a mouthwash in the proportion of 1 in 10 with water.
⚠️ Warning: Never fill the tank with boiling water or water above 40 degrees Celsius, which will cause permanent damage to the internal seals and pumps.
Set the tank on the body before the characteristic click. Make sure the nozzle nozzle is tightly inserted into the groove. Now the device is ready for the first start. Press the switch on once to activate the mode, and direct the jet into the sink to remove air from the system.
Set-up of operating modes and management
The main control panel of Xiaomi Soocas W3 and similar models is concise and usually consists of one multifunction button. Short press switches modes of operation, and long (about 2 seconds) turns on or off the device. Depending on the model, there are 3 to 4 cleaning modes available, each of which has its own specifications.
Standard mode provides medium jet pressure and is suitable for daily hygiene for most users. Soft mode reduces the intensity of pulsation, which is critical for people with sensitive gums or immediately after dental procedures. Pulse mode creates a intermittent stream for more thorough gum massage.
Secrets of cleanup regimes
Some models support connection to the Mijia or Soocare app via Bluetooth, which not only allows you to track your charge level, but also customize your individual cleaning profiles, and you can see usage statistics and get a reminder to replace the nozzle.
- 💧 Standard: Pressure of around 600 kPa, ideal for daily use.
- 🌿 Soft: Smooth mode with a pressure of about 400 kPa for beginners.
- ⚡ Pulse: Pulsating jet for deep cleaning of interdental spaces.
- 🚿 Jet: Maximum pressure for removal of persistent contaminants (in older models).
Techniques for proper teeth cleaning
The effectiveness of the procedure depends on the technique of execution. Bend over the sink so that water flows freely from the mouth without splashing through the bathroom. Place the tip in your mouth before turning on the device to avoid splashing on clothes.
Direct the jet perpendicular to the gum line, leading the nozzle along the dentition. Hold for 2-3 seconds in the interdental spaces. Movements should be smooth, without sudden jerks. The hydrojet should not rest on the gums at right angles with maximum pressure, this can cause injury.
☑️ Correct cleaning sequence
The total time of the procedure is recommended to be set within 1-2 minutes. You should not try to clean everything in one pass with maximum pressure. You should go through the dentition twice in gentle mode.
⚠️ Warning: Do not direct the jet directly to your gum pocket at right angles at maximum pressure, which can drive bacteria deeper into tissues and cause inflammation.
For braces or implant owners, the technique changes slightly, the jet needs to be directed at an angle of 90 degrees to the surface of the brace, clearing the space around the lock, and the Soft mode is especially important for implants, so as not to damage the soft tissue around the structure.
System care, cleaning and maintenance
Regular maintenance is key to Xiaomi Soocas' long-term service, and after each use, you need to drain the remaining water from the tank, remove the flask, flip the device over and press the switch on so that the pump pushes the residue of the fluid out of the hose, which will prevent bacteria from multiplying and scaling inside the system.
Once a week, a deep cleaning is recommended. Wash the tank with warm water with a mild detergent. The nozzle should also be washed separately. If lime plaque appears on the walls of the tank, use a citric acid solution or a special decalcination agent.
| Component | Frequency of care | Cleaning method | Replacement |
|---|---|---|---|
| Reservoir | Every day. | Water washing | As the damage progresses |
| Nozzle | Weekly | Soaking in antiseptic | Every 3-6 months |
| Corps | Monthly | Washing with wet cloth | Not subject to |
| Filter (if any) | Once a month | Flushing under the tap | Every 6 months |
Pay special attention to the silicone seal at the connection of the tank and the housing. Periodically wipe it with a dry wipe to remove contaminants.
💡
To disinfect the nozzle, soak it once a week in a chlorhexidine solution or a denture cleaning pill for 15 minutes, which will kill 99.9% of the bacteria.
Smartphone Connection and Ecosystem
Modern Soocare irrigators often support smart home functionality. To connect, download the Mijia or Soocare app from the official app store. Turn on Bluetooth on your smartphone and start searching for devices.
The app allows you to switch modes without pressing buttons on the body, which is convenient if the device is hanging on the wall in the shower. You can also see the battery level as a percentage, which is much more informative than a flashing indicator. Use statistics help you develop a habit of brushing your teeth regularly.
You can activate reminders to clean and replace your nozzles in the app settings. Some firmware versions allow you to adjust the timer's duration. If the device stops connecting, try removing it from the Bluetooth list and pairing it again.
Frequent problems and their solution
Even Xiaomi’s robust appliances can run into typical problems: If the device is buzzing but the water is not coming or is running a weak stream, there is likely air left in the system. Try turning the device on and off several times, pointing the nose into the sink to kick out the air traffic jam.
If the irrigator doesn't turn on, check the charging contacts. Contact oxidation is a common problem in the bathroom. Wipe them with an alcohol wipe. Also make sure the switch isn't locked (some models have a lock from children).
⚠️ Warning: If the device falls into the water when it is on, remove the battery immediately (if possible) or leave it to dry in a warm place for at least 48 hours before the next charge.
Reducing battery capacity over time is a natural process, and if the battery life has been reduced significantly (e.g. from 30 days to 5 days), you may need to replace the battery at the service center.
💡
Most pressure problems are solved by simply cleaning the nozzle hole with a needle or soaking in a vinegar solution to remove mineral deposits.
Comparison of models and selection of nozzles
The Soocas range includes various models, from compact to compact. W1 advanced W3 Pro. The main difference lies in the battery capacity, the number of modes and the presence of a display. W3 Pro, for example, is equipped with OLED-screen displaying mode and charge, making the use more intuitive.
Nozzles are consumables that cannot be ignored. Standard nozzles are suitable for most users. For those who wear braces, there are special soft bristles nozzles (Orthodontic Tip).
The use of original accessories ensures compatibility and proper jet pressure. Third-party nozzles may have a different section of the hole, which will overload the pump or, conversely, low pressure. Original components serve longer and safer for the device.