Owners of video surveillance systems often face the need to accurately determine the network address of their device. IP-address is a unique identifier, without which it is impossible to integrate the camera into third-party systems, configure local recording on the camera. NAS In the Xiaomi and Yi ecosystem, the process of obtaining this data can vary depending on the device model and the software used.
Modern. IP-Xiaomi cameras typically work in conjunction with cloud services, which hides direct network settings from the user for security, but for advanced configuration, you need to access the device’s local network. There are several proven methods to bypass the interface limitations and get the right numbers for configuration.
In this guide, we’ll look at all the current ways to get an address, from using regular software to network scanners, and learn not only to find your current address, but also to anchor it so that your camera is always available on the same path on your home network.
Use of the official Mi Home app
The most obvious, but not always obvious, way for beginners is to search for information inside the Mi Home app itself. The interface changes periodically, so developers can move technical data to different sections, most often the desired parameter is hidden in the settings menu of a particular device.
To get data, open the app and go to the main screen, where all the connected gadgets are displayed. Click on your camera icon to go into video stream viewing mode. In the upper right corner of the screen, find the icon with three dots or a gear - this is the input to the settings menu.
In the list that opens, look for Camera Settings or General Settings, and inside it can be Device Information or Network Information, which often indicates the current settings. IP, assigned by the router, if the application only displays MAC-address, IP Hidden, proceed to the following methods.
⚠️ Note: In some versions of the firmware cameras Xiaomi manufacturer completely removed the display IP-This is done to simplify the interface for ordinary users, so the absence of a point does not mean a malfunction of the device.
It's worth noting that the app shows the address the camera has received at the moment, and if you don't have a static anchor set up, after you restart the router, this set of numbers may change, which will require rechecking.
Search through the router's web interface
The most reliable method, which works regardless of the camera model and the firmware version, is to check the client list in the admin panel of your router, and because the camera is connected to Wi-Fi or cable, it is necessarily listed in the active device table of the router.
You need to get to the router control interface first, and usually enter the gateway address in the browser address bar, often 192.168.0.1 or 192.168.1.1. After entering the login and password (listed on the sticker at the bottom of the router, if you haven't changed them), the control panel will open.
You need to find a section called the “Customer List», «DHCP Client List, Network Map, or Connected Devices: In this list, look for a device with a name that contains Xiaomi, Yi, or IP Camera, next to the name will be the current IP-address MAC-address.
Known. MAC-The camera address (it's also printed on the sticker on the bottom of the device), you can easily identify it among dozens of other gadgets on the network.
☑️ Router check.
Scanning the network with a computer
If you're not accessing the router, or you don't know the password, you can use specialized software to scan the network from a computer connected to the same Wi-Fi. There are many free gates that will show all active devices in seconds.
One of the most popular programs is Advanced IP Scanner, which requires no installation and works immediately after launch, scans the range of addresses and gives a list of all devices, their manufacturers and network names.
Run the scan and wait until the process is over. In the Manufacturer column, look for Xiaomi Communications Co Ltd or similar names. The program can also show open ports, which is useful for further customizing the video stream.
Alternative scanning programs
Using scanners allows you to quickly detect devices that for some reason do not appear in the standard lists of the router or have non-standard names.
Use of command line and utilities
For users who prefer console commands or cannot install third-party software, the operating system's built-in tools are suitable, a method that requires minimal knowledge of network commands, but produces accurate results.
The first step is to determine the gateway address. On Windows, open the command prompt (cmd) and type in the ipconfig command. Find the default primary gateway line is your router's address. On macOS and Linux, use the ifconfig or ip a command.
Next, you can use the ping command for broadcasting to “wake up” all devices on the network, and then ARP-Enter the ping command. 192.168.1.255 (Replace the last part with your subnet, and then arp -a.
arp -aIn the list, look for acquaintances. MAC-Although less informative than graphics scanners, this method works on any computer without installing additional software.
Setting up a static IP address
Once you have found your current address, it is important to attach it to the camera. Dynamic IP change when you reboot the router will cause the video surveillance system (NVR) or automation scripts to stop seeing the camera.
The best way to do this is to set up a static lease (Static). DHCP) It's in the router itself. DHCP-The router server needs to find a list of reserved addresses and link MAC-camera address IP, for example 192.168.1.50.
Now, even if the camera reboots, the router will always give it a reserved address, which eliminates address conflicts and communication interruptions at a critical moment.
| Parameter | Description | Recommended value |
|---|---|---|
| IP-address | Unique number on the net | 192.168.x.50 - 192.168.x.200 |
| Subnet mask | Determines the size of the network | 255.255.255.0 |
| Gateway | Router address | 192.168.x.1 |
| DNS | Name Server (for the cloud) | 8.8.8.8 or router address |
Some cameras allow you to manually prescribe static IP in their own settings, as long as you have access to the web interface of the camera itself, but the method of binding on the router is considered more flexible and secure.
Solving Connection Problems
Often users are faced with a situation where the camera is physically connected, but does not appear on the network or has a view address. 169.254.x.x. This means that the device was unable to receive the address from the DHCP-router.
Check if the router is not enabled filtering by MAC-If the camera is new, it may be blocked by a security mechanism, and it is also worth making sure that the camera is connected to the correct Wi-Fi frequency - many Xiaomi models only work in the 2.4 GHz band and ignore 5 GHz networks.
⚠️ Warning: Make sure your router does not include Wi-Fi customer isolation (AP Isolation: This feature prevents devices within the LAN from seeing each other, making it impossible to find the camera from a computer.
If the camera is wired, check the integrity of the twisted pair. Some models require an active PoE switch or injector if the camera does not have its own power supply.
💡
Stable operation of the video surveillance system is possible only with correctly configured static IP-Addressing and no conflicts in the local network.