How to connect Xiaomi scales: step-by-step instructions and setting

Xiaomi’s modern smart scales have become the standard for affordable health monitoring electronics, which can analyze not only total weight but also percentages of fat, muscle, water, and even bone mass. However, for a gadget to start transmitting data and charting progress, it needs to be properly synchronized with a smartphone. The initial setup process often raises questions for new users, especially when changing operating systems or updating applications.

The key is choosing the right software, as the manufacturer’s ecosystem has changed in recent years. Whereas Mi Fit used to be the main application, now it’s moved to Zepp Life and Mi Home. Choosing the right software or mismatching the Bluetooth module can lead to scales not being displayed on the list of available devices. In this article, we’ll take a closer look at each connection step, look at the differences between models, and solve typical pairing problems.

Successful integration of the gadget into your digital environment will allow you to keep an accurate record of your body changes, synchronization happens automatically every time you step onto the platform, and data is instantly stored in the cloud, and it eliminates the need to keep paper diaries or manually enter numbers, so let's move on to hardware preparation and installing the necessary software to get started.

Preparation for synchronization and selection of the application

Before you try to connect the devices, you need to make sure that the scales are ready to work. They usually come with a protective film on the battery contacts or a plastic insulator that you need to remove. Put AAA batteries in the appropriate compartment on the bottom panel. Then the power numbers should light up on the display. If the screen does not respond, check the polarity of the battery installation.

The next critical step is to install the right app on your smartphone. For most models, such as the Mi Body Composition Scale 2 or the simpler versions of the Mi Scale 2, the main working tool is the Zepp Life app (formerly known as Mi Fit). This profile stores the entire weighing history and conducts complex biometric calculations. The Mi Home app can be an alternative, but its functionality for weights is often limited to basic weight mapping without detailed analytics.

Download the software only from official sources: Google Play Market for Android or App Store for iOS. Third-party versions may contain errors or do not support current security protocols. Once installed, launch the application and create an account if you do not already have one. Registration is mandatory for data retention and synchronization between devices.

Note that for the Bluetooth scale module to work properly, you need to allow the app to access geolocation. This is a standard requirement of the Android operating system for scanning devices in range. GPS-The phone module simply won’t see the scales in the list available for connection.

Connection process via Zepp Life

The pairing procedure in the Zepp Life app is the most common and reliable. Open the app on your smartphone and go to the user profile. At the top of the screen or in the Profile menu, find the add button for a new device. The system will suggest you choose the type of gadget from the list. You need to find the Libra category and select your model, for example, Mi Body Composition Scale 2.

Once you select a model, the app goes into search mode, and you have to stand on the scale to activate their Bluetooth signal, the display has to flash or show the search process, and once the smartphone detects the device, the pairing request appears on the screen, and you confirm the action, and the process (binding) begins, which takes a few seconds.

It is important to stay within the weights at the time of setting up. The distance between the phone and the weights should be minimal, preferably no more than 1-2 meters. If the connection is not established the first time, try to exit the search menu, completely close the application and repeat the procedure again, pre-rebooting Bluetooth on the smartphone.

⚠️ Note: Do not try to connect scales through the standard Bluetooth menu settings Android or iOS. the pairing must occur strictly within the Zepp Life application, otherwise the scales may be blocked to transfer data to the profile.

Once the app is successfully connected, it will ask for personal data such as height, age and gender, which algorithms need to calculate body mass index (BMI) and fat percentage. Without accurate anthropometric data, the analytics will be incorrect. Make sure all the fields are filled in correctly before the first weighing.

Configure via the Mi Home platform

Some users prefer to use the Mi Home ecosystem to manage all smart devices, and it's also possible to connect scales to this platform, but it has its own features, starting with the press of the + button in the upper right corner of the app's home screen, and you need to find scales or search the model.

When you add to Mi Home, the system can suggest you select a region. Make sure the region in the app matches the region chosen when you register your Xiaomi account. If the scales are bought in China and the account is European, it can be difficult to detect the device. In such cases, you sometimes need to change the region in the profile settings to China, add the device, and then return it back.

The weights in the Mi Home app are often stripped down compared to the Zepp Life profile.You can see the current weight and history, but deep body composition analysis may not be available or require additional plugins. Therefore, for serious health monitoring, it is recommended to use Zepp Life as the main application, and in Mi Home, you should add scales only to create smart home scenarios.

Calibration and first weighing

Once digitally connected, you need to have your first physical interaction with the device: set the scales on a hard, flat surface; carpets, soft-backed linoleum or sloping floors can distort the sensor readings; the optimal place is tile or wood floor without pile.

Stand on the platform with your bare feet, the feet should fit tightly to the metal electrodes located at the corners of the scale, and it is through these contacts that the electrical current (a bioimpedance analysis method) passes, which allows you to determine the composition of the body, and if the legs are dry or not on the electrodes, the scales will only show the total weight, but will not be able to calculate the percentage of fat.

During the measurement, you have to stand still, your hands along your body. Don't touch your clothes or other objects. It takes about 5-10 seconds. Once you're done, the result will appear on the display, and the LED light will flash, confirming that you're sending the data to your smartphone. If you're weighing in for the first time, the app may ask you to confirm that it's you and assign a profile.

💡

For better contact with the electrodes, slightly moisten the feet with water before weighing, especially if the skin is dry, which will improve conductivity and accuracy of fat percentage measurement.

The first few weigh-ins can give you a scattering of readings. This is normal, because the sensors are calibrated to your weight. It is recommended to take 2-3 measurements at intervals per minute so that the device stabilizes the values. In the future, the scales will “recognize” the user by weight and automatically link the data to the desired account.

Solving Typical Connection Problems

Despite the simplicity of the procedure, users often face difficulties. One of the most common problems is that the scales are not an application. In this case, check if they are already connected to another phone. Xiaomi scales can only store one active connection in memory to set up. If someone else has used the device before, you need to reset.

To reset, remove the batteries from the scales for 10-15 seconds, then paste them back in. Immediately after turning them on, search the app. Also, the problem may lie in the overflowing memory of the phone's Bluetooth module. Go to the smartphone's Bluetooth settings, find in the list "Mi Scale" or "Xiaomi Scale" and click "Forget the device" or "Untie."

⚠️ Note: If the scale shows the symbol "Lo", it means low battery charge. Replace the batteries with new, preferably alkaline, as they provide a more stable voltage under load.

Another cause of failure may be software conflict. Make sure the Zepp Life or Mi Home app is updated to the latest version through the app store. Older versions may not support the new encryption protocols used in fresh batches of scales. Also check if the phone is in a "Saving Energy" mode that can limit Bluetooth in the background.

💡

90% of connectivity problems are solved by fully restarting Bluetooth on your phone and removing batteries from the scales for 30 seconds.

Use of guest mode and multiple users

Xiaomi's smart scales support multi-user work. This is implemented through a profile system. In the app, each family member must create their own account or profile. When weighed first, the system remembers the weight and assigns it to a particular user. Later, when you stand on the scale, they automatically determine whose weight it is, and send the data to the appropriate profile.

There is also a guest mode, which is useful if you have friends who want to weigh in, but you don't want to mix their data with yours. To activate this mode, you usually just need to click a special sequence on the touchpad (depending on the model) or select an option in the app before weighing in. Guest data will be shown on the screen, but not saved to history.

• 👤 Automatic recognition: Libras distinguish users by weight range, if the difference between family members is less than 5-10 If you're not, you can mix up the profiles, so you can manually reassign the recording to the application.
• 📉 Analytics: Each user is plotted on a separate schedule of weight and fat changes, which allows them to track the dynamics of weight loss or muscle gain individually.
• 🔄 Synchronization: All users’ data are synchronized with the Xiaomi cloud. When changing your smartphone, just log into your account, and the entire history of weighing in will be restored.

If you have twins or people of the same weight in your family, you may have to manually confirm the owner of the profile after each weigh-in, and over time, the system learns and begins to do it more accurately, taking into account not only the weight, but also the time of day and frequency of weigh-ins.

Frequently Asked Questions (FAQ)