Xiaomi’s modern kitchen gadgets make cooking a fun activity that requires minimal user involvement. The smart aerogrill allows you to control temperature, time and mode of operation directly from your smartphone screen, anywhere in the apartment. However, initial configuration of the device often causes difficulties, as it requires strict adherence to the sequence of actions for successful pairing.
The main challenge for most owners is not physical connection to the power grid, namely synchronization with the Mi Home or Xiaomi Home application. Without this step, the gadget will remain a regular, albeit high-quality, mechanically controlled brazier. In this article, we will discuss each step in detail, from unpacking to launching the first automatic recipe so that you can enjoy healthy food without unnecessary headaches.
Before trying to find a device in the list of available, make sure that your router is running at 2.4 GHz, as most of the IoT modules from the Chinese manufacturer do not support the 5 GHz standard. This is a critical point, ignoring which leads to an endless search for the device or error in the 99% stage.
Preparation for the first launch and inspection of the completeness
Start by inspecting the device carefully after being removed from the box, make sure the grill bowl is tightly inserted into the case before the characteristic click, and the protective films from the heating element and the inner walls are completely removed. The residues of the factory packaging can cause smoke on the first turn on and the activation of safety sensors, which will block the ability to connect to the network.
It is important to place the gadget on a stable, flat surface, allowing free air access to the ventilation holes. The heat exchange in such models is intense, and proximity to walls or curtains can cause overheating and automatic shutdown, which the application can interpret as a communication error.
Before installing the software on your phone, check the operating system version. For stable operation of Wi-Fi and Bluetooth modules, Android is required at least 6.0 or iOS 10.0. If the smartphone software is outdated, the scanning process is performed. QR-The code may be incorrect or may break in the middle.
⚠️ Warning: Do not attempt to turn the device on if visible damage to the power cord or plug is noticeable.This can short-circuit and failure of the control board, making it impossible to connect wirelessly.
Make sure you know the password from your home Wi-Fi network. Manual data entry often leads to errors due to typos, so it is better to copy the password in advance to the clipboard or have it on hand in text form. Pay special attention to the character register, as the router's security system is sensitive to this parameter.
Installation and configuration of the Mi Home application
To manage the kitchen appliances Xiaomi uses a single ecosystem Mi Home. download the application should be exclusively from official sources: Google Play Store for Android or App Store for iOS. Third-party versions of the program may contain malicious code or do not have current drivers for new models of aerogrils released this year.
Once installed, you need to create a Xiaomi account or log in to an existing one. When registering, it is important to choose the right region. If the device is purchased in China but you are in Europe, choosing the wrong country in your profile can hide the device from search.
When you first run the app, you'll ask for a number of permissions, you'll have to agree to geolocation, Bluetooth, LAN, and notifications, and without those permissions, the detection protocol won't be able to send your router to the grill, and you'll have to leave the device without seeing the new hardware.
- 📱 Download the official Mi Home app from a trusted store.
- 🌍 Select the correct region when you log in to your account (usually your country of residence).
- 🔒 Allow geolocation and Bluetooth access in phone settings.
- 📶 Make sure your smartphone is connected to a 2.4GHz Wi-Fi network.
The interface of the app may vary depending on the version, but the principle of adding devices is the same. In the upper right corner of the main screen is the plus + icon, clicking on which triggers automatic search of gadgets nearby. If the search does not begin automatically, you can use manual selection from the directory by finding your model by image or name.
The process of pairing the device with a smartphone
The process of connecting requires concentration, because the waiting timer is often limited. Turn the aerogrill into the socket. The control panel should light up an indication that often flashes, which signals the pairing standby mode. If the indicator is on with even light, you may need to pinch the combination of buttons to go into setting mode, as usually indicated by a quick blink.
Bring your smartphone as close as possible to the device, literally 10-20 centimeters away, and the app will pop up with a suggestion to add a new gadget, click "Connect." The system will prompt you to enter a password from Wi-Fi if it is not saved automatically, and after confirmation, the network settings will be transmitted to the device.
At that point, a progress scale may appear on the smartphone screen. Don't fold the app or lock the phone screen. It takes 30 to 60 seconds to transfer profiles. IP-address from the router and registered on the cloud storage server.
☑️ Pre-conjugation check
If the process is stuck at 50-80%, it often indicates a weak signal or interference in the air. Try to restart the router and repeat the procedure. Also helps to temporarily disconnect the mobile Internet (data transfer) so that the phone uses only the Wi-Fi channel for communication.
| Connection phase | Grilled indication | User action |
|---|---|---|
| Waiting. | Blinks slowly | Put it in the socket. |
| Searching the net | Fast blinking. | Click "Connect" in the app |
| Synchronization | It's burning all the time. | Waiting for completion (do not touch) |
| Ready. | Indication of regime | Choose a recipe or settings |
Setting up profiles and updating firmware
After successfully adding a device to the list of "My devices" it is recommended to immediately check for updates. Manufacturers regularly release patches that eliminate communication bugs and expand functionality. Go to the settings of the specific grill in the application and find the "Review Updates".
Firmware Update is a critical step. New software versions improve heat distribution algorithms and stabilize the connection to the server. It can take several minutes for the device to restart. Don't turn the grill off at this point.
You can also rename your device by giving it a clear name, like "Greel Kitchen," and add it to a specific room, which will make it easier to use voice control through assistants like Alice or Google Assistant if you plan to integrate the grill into your smart home system.
⚠️ Warning: During a firmware update, it is strictly forbidden to interrupt the power supply. This can lead to the "bricking" of the controller, after which the device will cease to respond to commands and require maintenance repairs.
What does a firmware update do?
For users planning to use voice control, you need to link Xiaomi account to voice assistant account, this is done in the "Profile" -> "Manage smart home devices" in the assistant app. After linking, you can command: "Enable grill 180 degrees."
Using Automatic Recipes and Remote Management
The key to a smart grill is access to a cloud-based recipe database, and the Cooking or Recipes section is available in the app, which contains instructions for different dishes, and when you choose a recipe, such as Chicken Wings, you automatically set the right temperature and time.
When you start a recipe, your smartphone acts as a remote control, so you can see in real time how much time is left before you're ready, and if you need to adjust your settings, the notification of completion of the preparation will come to your phone screen, even if you're in another room.
Some models support delayed start, so you can pawn your groceries in the morning, set a timer for the evening, and dinner will be hot by your arrival, but from a food safety perspective, leaving perishable food out of the fridge for a few hours is not recommended.
- 🍗 Choose proven recipes with high ratings in the app.
- ⏱ Use the delayed start timer with caution.
- 🔔 Don’t ignore notifications of completion of cooking.
- 🌡 Monitor the temperature in real time through the app.
Remote control allows you to control the cooking process even when you're away from home, provided the grill is connected to the internet, you can check if you've turned off the appliance, or add cooking time if guests are late, which provides an added layer of safety and comfort.
Diagnostics of problems and resetting settings
If the device has stopped responding to commands or is lost from the network, the first thing to do is check the stability of the Wi-Fi signal at the place of the grill installation. The metal housing and working heating elements can cause interference. Try to move the router closer or use a Wi-Fi repeater.
A common problem is changing the router password or replacing it, in which case the grill loses the network, you need to reset the Wi-Fi module, usually by pressing the button combination on the control panel for a long time (5-7 seconds) until the indicator flashes quickly.
Once reset, the device needs to be re-addressed to the app, as in the first install. If the problem persists, try removing the device from the list in the app (holding the icon) and adding it again, which will clear the settings cache and establish a fresh connection.
💡
If the grill often loses the network, try to fix static to it in the router settings. IP-This will prevent address conflicts and loss of communication after the router restarts.
If there are error codes on the display (e.g. E1, E2), refer to the instructions. Often this indicates overheating or no bowl. The smart system blocks the start of the TENS when the TENS malfunction, so connection to the application at this point may not be available until the physical cause is eliminated.
Frequently Asked Questions (FAQ)
Can you control Xiaomi’s grill without the internet, only via Bluetooth?
What if the app doesn’t see the grill when searching?
Does the grill work with Xiaomi’s Russian servers?
How to reset Wi-Fi settings on the air grill?
Do I need to update the firmware every time I use it?
💡
A stable 2.4 GHz connection and the current version of the Mi Home app are key factors in the successful operation of a smart aerogrill.