Why link Yandex Station to Xiaomi TV
Voice assistants have long ceased to be exotic — they have become an integral part of smart homes. MIUI TV Google TV) They complement each other very well, and you can control content, you can adjust volume, you can even run apps with your voice without getting up from the couch, but how do you set up that bunch to avoid the typical mistakes?
In this article, we will analyze all the current ways of connecting – from basic synchronization through Yandex IoT to advanced scenarios using third-party services. TV They support direct integration, which will require a workaround, and we will also analyze frequent problems (for example, when the station does not see the TV) and give specific solutions.
Important: If your TV is released before 2019, some features may be limited due to an outdated version MIUI TV. In this case, you will need a preliminary firmware update - how to do this, read the relevant section.
What are Xiaomi models? TV Support connection to Yandex Station
Not all Xiaomi TVs are equally compatible with the Yandex ecosystem, the main criteria being whether Yandex IoT is built-in or if Alice is installed via Google Play.
- 📺 Mi TV 4S/4X/4A (2020–2023) — full support through MIUI TV 3.0+ and the built-in Yandex application.
- 🖥️ Mi TV Q1/Q2 (2021–2026) — Google Assistant compatible, but require manual configuration via Yandex IoT.
- 🎯 Redmi Smart TV X (2022–2026) – limited support, base commands only (on/off).
- ⚠️ Mi TV 3S/3X (before 2019) — Not officially supported, but a workaround is possible IFTTT or Home Assistant.
To determine exactly the compatibility of your model, check the version. MIUI TV in settings: Settings → On TV. → Version. MIUI TV. If the version is below 3.0, you will need to update or use alternative methods.
Preparing for the connection: what to do in advance
Before you start setting up, make sure that all the preconditions are met, which will save time and avoid errors like "device not found" or "no network connection."
Make sure that Yandex Station and Xiaomi TV Connected to a single Wi-Fi network (2.4 GHz)
Update the TV to the latest version (MIUI TV 3.0+)
Install the Yandex app from Google Play (if available)
Registering a Yandex account ID station-television
Shut down. VPN or proxy on both devices-->
Yandex Station and TV should be on the same subnet (usually meaning the same network name). If you have a dual-band router, give priority to 2.4 GHz networks, which are more stable for smart home devices. Also check that the router is turned off the isolation mode of customers (AP Isolation, otherwise devices won’t see each other.
⚠️ Note: If your TV is connected to the network via an Ethernet cable and Yandex Station is connected to Wi-Fi, the sync may not work, in which case temporarily connect the TV to the same Wi-Fi network as the station, or use the bridge over the router (Client Isolation mode). = Disabled).
Method 1: Connect via Yandex application (official method)
This is the easiest and most reliable way if your TV supports the installation of the Yandex application from Google Play. TV 4S/4X/4A (2020–2023) mi TV Q1/Q2.
- Open Google Play on your TV and find the Yandex app (developer — OOO Yandex. Install it.
- Launch the application and log in under the same Yandex ID, station-wise.
- In the app menu, select a Smart Home → Add the device → Television.
- Follow the instructions on the screen. The TV must automatically be identified in the list of available devices.
- Confirm the bundle on Yandex Station with a voice command: "Alice, find new devices."
After successful connection, check the performance of the basic commands:
- 🔊 "Alice, turn on the TV"
- 📺 "Alice, show the First channel on Xiaomi"
- 🎵 "Alice, turn it up 20%"
💡
If the TV is not detected, try restarting both devices and repeating the search. Sometimes resetting the network to Yandex Stations helps (hold the microphone button 10 seconds before the beep).
Method 2: Connect via Yandex IoT (for TVs without Yandex app)
If your TV does not support the installation of Yandex application (for example, Redmi Smart). TV X or older Mi models TV 3S), You can use the Yandex IoT platform, and it takes a little bit more effort, but it works consistently.
- Go to the Yandex IoT website and log in.
- In the Devices section, click Add Device → Other devices.
- Choose a TV. → Xiaomi (if the model is not listed, choose Universal TV).
- Enter. IP-address of your TV (you can find it in the network settings: Settings) → Network → Connection status).
- Generate an access token for your TV (instruction below) and enter it in the field on the site.
To generate a token on the TV:
- Activate Developer Mode: Go to Settings → About TV and click on MIUI TV 7 times.
- Back to Settings → Additionally. → For developers and enable debugging over the network.
- Copy the displayed token (or password to connect).
⚠️ Note: Access token is valid for a limited time (usually 24 hours).If the bundle stops working, generate a new token and update it in the Yandex IoT settings.
| Model TV set | Support for Yandex IoT | Need a token? | Max. Teams. |
|---|---|---|---|
| Mi TV 4S (2020–2023) | ✅ Complete. | ❌ No. | On, channels, volume, applications |
| Mi TV Q1 (2021–2026) | ✅ Complete. | ✅ Yes (for extended functions) | + management HDMI-entrance |
| Redmi Smart TV X (2022) | ⚠️ Partial | ✅ Yes. | Only on/off |
| Mi TV 3S (until 2019) | ❌ No. | ✅ Yes, only through IFTTT) | Limited to scripts |
Method 3: Alternative methods (IFTTT, Home Assistant, BroadLink)
If the official methods don't work (for example, on very old models), you can use third-party services.
1. Automation through IFTTT
IFTTT (If This Then That) allows you to create a chain of actions between devices, for example, the voice command Yandex Stations will send a signal to the TV through the cloud.
- 🔗 Pros: works even with older models, does not require technical knowledge.
- ⚠️ Cons: delay (2-5 seconds), limit to 3 applets in the free version.
Instructions:
- Register for IFTTT.
- Create a new applet with the Yandex Alice trigger (team) and action by Xiaomi MIOT (television-control).
- Authorize both services and save the applet.
2. Local management through Home Assistant
Home Assistant – an advanced smart home system that supports integration with Xiaomi TV plugin mi_tv. It will:
- 🖥️ Installed Home Assistant (on a Raspberry Pi or NAS).
- 🔌 Connecting TV and station to the same network.
- 🔑 Access Token (see section on Yandex IoT).
Once set up, you can control your TV through Yandex Alice with minimal latency.
Example of configuration for Home Assistant
3. Remote management via BroadLink RM4
If your TV is controlled by an IR remote, you can use BroadLink. RM4 mediator:
- Configure BroadLink to record commands from the original remote.
- Connect it to Yandex IoT as a smart home device.
- Create voice commands like “Alice, turn Xiaomi on” HDMI1".
This method is universal, but requires the purchase of an additional device (~2000–3000 ₽).
💡
For maximum stability, it is recommended to combine methods: for example, use Yandex IoT for basic commands and Home Assistant for advanced scenarios.
Typical problems and their solutions
Even with the right setup, you can have failures, and here are the most common mistakes and ways to fix them:
| Problem. | Possible cause | Decision |
|---|---|---|
| Yandex Station can't find TV | Different Wi-Fi networks or enabled AP Isolation | Connect both devices to the same 2.4GHz network, disable customer isolation on the router |
| Commands are executed with a delay | Weak Wi-Fi signal or router overload | Reconnect devices to 5GHz (if supported) or reboot your router |
| The TV is turned on but does not switch channels | Lack of access rights to Yandex IoT | Generate a new token and update it in your device settings |
| Voice commands are only available in English. | Incorrect regional settings | In the settings of Yandex Stations, select the region Russia and the language Russian |
Critical error: If the TV starts to turn on spontaneously at night, check Yandex IoT settings for active scenarios. Often automatic updates or geolocation triggers (for example, “turn on the TV when you come home”) are to blame.
⚠️ Warning: If the bundle stopped working after updating the TV firmware, try removing the device from Yandex IoT and adding it again. MIUI TV Resetting permissions for third-party services.
Additional features: scripts and voice commands
Once you've successfully connected, you can set up schedules and complex scenarios, such as:
- 🌅 "Alice Mode Mode – Turns off lights (via smart lamps), turns on the TV and launches Netflix.
- 🏠 "Alice, turn everything off – shuts down the TV, station and router for the night.
- 🎮 "Alice, Game Mode – switching the TV to the TV HDMI-ports with prefix and includes low delay mode.
To create scenarios:
- Open the Yandex application on your smartphone.
- Go to the Smart Home → Scenarios → Create a script.
- Add conditions (time, geolocation) and actions (television commands).
An example of an advanced scenario:
Condition: Time 20:00, weekdays
Action:
1. Turn on Xiaomi TV
2. Launch the Kinopoisk app
3. Set the volume to 50%
4. Turn off the lights in the living room💡
Use aliases for devices in Yandex Station settings, for example, instead of "Xiaomi" TV Q1" Call the TV the Big Screen, and the commands will sound more natural: Alice, turn on the Big Screen".