How to connect the robot vacuum cleaner Xiaomi Vacuum Cleaner 1S to Mi Home: a complete guide with photos

Why is it so difficult to connect Xiaomi Vacuum Cleaner 1S to Mi Home?

Xiaomi Vacuum Cleaner 1S (aka Mi Robot Vacuum-Mop Essential in the global version) is one of the most popular smart cleaning devices. But even with such a simple gadget, users often face problems during the first connection stage. The reasons can vary from banal incompatibility of the application version to the specific settings of the Wi-Fi router.

In this article, we will analyze the step-by-step connection algorithm, look at common errors (for example, Device offline or Connection failed), and give recommendations for optimizing the vacuum cleaner after synchronization. We will pay special attention to the nuances that the manufacturer does not mention in the official instructions - for example, how to reset the device before reconnecting or why 1S does not see a 5 GHz network.

If you've tried to plug in a vacuum cleaner and you've got a mistake, don't rush it into service. 90 percent of the time, it's solved by setting up your router or updating your firmware, and for those of you who've just unpacked the box, we've prepared a training checklist to avoid the typical mistakes.

What's it gonna take to connect?

Before you start syncing, make sure you have everything you need. Here's the minimum set:

• 📱 Smartphone on Android 6.0+ or iOS 10.0+ with the Mi Home app installed (you can download it from the App Store or Google Play).
• 🌐 Stable Wi-Fi connection 2.4 GHz (robot does not support 5 GHz!) Network name (SSID) It must contain only Latin characters and numbers – Cyrillic or special characters can cause error.
• 🔋 Charged robot vacuum cleaner Xiaomi Vacuum Cleaner 1S (charge level at least 20%, but better 50%+).
• 📡 Router with protocol enabled DHCP (If you have a corporate or hotel chain with portal authorization, you can't connect.

Also check that the smartphone includes:

• 📶 Wi-Fi and Bluetooth (required for initial synchronization).
• 📍 Geolocation (Mi Home app requests location access to link device to region).
• 🔄 Auto-update date and time (time mismatch on Xiaomi phone and servers may block connection).

Next articleInstructions: Connecting Xiaomi Vacuum Cleaner 1S to Mi Home

If you're done, you're going to start connecting. Follow the instructions strictly on the steps, without missing points. If you get an error at some point, go back to the previous step and repeat the action.

Step 1: Install and configure the Mi Home app

Download the Mi Home app from the official store.

1. Open the app and select Russia (or your country). If you choose China, some features may not be available due to regional restrictions.
2. Sign up or sign in to an existing Xiaomi account (via email, phone or Google/Facebook).
3. Press + in the upper right corner → Add the device.

Step 2: Preparing a Robot Vacuum Cleaner

Turn on the vacuum cleaner by pressing and holding the power button on the case for 3-5 seconds until you hear the beep.

• 🔊 The vacuum cleaner will give a voice greeting in Chinese or English (depending on the firmware).
• 🔄 The Wi-Fi indicator on the case flashes orange (meaning the device is ready to connect).

Step 3: Synchronize via Bluetooth

At the Mi Home appendix:

1. Select the category of vacuum cleaners → Xiaomi Vacuum Cleaner 1S.
2. Click Add and wait until the app finds the device via Bluetooth.
3. Bring the phone to the vacuum cleaner at a distance of 10-20 cm (the closer, the faster the synchronization will pass).

If the device is not located, check if Bluetooth is on on the phone and restart the vacuum cleaner (hold the power button for 10 seconds).

Step 4: Connect to Wi-Fi

After successful Bluetooth synchronization:

1. Select your 2.4GHz Wi-Fi network from the list.
2. If the password contains Cyrillic or special characters (e.g.!, #), try changing it temporarily to Latin.
3. Wait for the connection to be completed (the vacuum cleaner will emit an audible signal, and the indicator will turn blue).

Step 5: Completion of the setup

After connection:

• The application will offer to update the firmware - be sure to agree, since outdated software can cause failures.
• Set up a Cleaning Schedule, Ban Zones and other settings in the Device section.
• Conduct a test cleaning to make sure the vacuum cleaner is displayed correctly in the app and responds to commands.

1. Does the internet work on your phone (turn off the VPN if you use it).

2. Does the firewall or antivirus block the connection to Xiaomi servers?

3. whether the Wi-Fi network has changed (for example, if the router automatically switched the device to 5 GHz).-->

Typical errors and their solutions

Even with the correct following of the instructions, there can be failures, and let's look at the most common mistakes and how to fix them.

⚠️ Warning: If after several attempts to connect the vacuum cleaner stopped responding to the power button, perform a hardware reset. To do this, press and hold the power and home buttons simultaneously for 10-15 seconds until you hear a double beep. After resetting, repeat the connection procedure.

Xiaomi Vacuum Cleaner 1S setup after connection

Successful connectivity is only half the battle, and in order for a vacuum cleaner to work efficiently, it needs to be configured correctly.

• 🗺️ Map of the room: After the first cleaning, the vacuum cleaner will create a map. Check its accuracy and adjust the boundaries of the rooms in the application if necessary.
• ⏰ Schedule: Set up automatic cleaning for a convenient time, and we recommend choosing hours when no one is home (for example, from 10:00 to 12:00).
• 🚫 Zones of prohibition: Mark areas where the vacuum cleaner does not need to enter (for example, long-pile carpets or children's play areas).
• 🔋 Cleaning modes: Choose the optimal balance between quality and time: Quiet for daily cleaning, balanced for general cleaning, maximum for severe pollution (consumes more battery).

We also recommend:

• 🔄 Update the vacuum cleaner firmware when new versions appear (notifications come to the Mi Home app).
• 📱 Include notifications of completion of cleaning or low charge.
• 🔧 Clean sensors and brushes periodically (every 1-2 weeks) for accurate navigation.

💡

If the vacuum cleaner often loses contact with the application, try to attach a static one to it. IP-The address is in the router settings. MAC-Device address in Mi Home (Settings section) → About the device) and add it to the list DHCP-router.

How to reset the Xiaomi Vacuum Cleaner 1S before reconnecting?

If the vacuum cleaner has already been connected to another account, or you want to start setting up from scratch, do a full reset. There are two ways:

Method 1: Program reset (via the appendix)

If the vacuum cleaner is connected to your account:

1. Open Mi Home → pick a vacuum cleaner.
2. Go to Settings (cog in the upper right corner).
3. Select Delete Device → Confirm the action.

The device will be untied from your account, but the Wi-Fi settings will remain. Use the second method to completely reset.

Method 2: Hardware reset (buttons on the body)

If the vacuum cleaner does not respond to commands from the application:

1. Turn off the vacuum cleaner (hold the power button for 5 seconds).
2. Press and hold the power and home buttons at the same time for 10-15 seconds until you hear a double beep.
3. The Wi-Fi indicator will flash orange, which means that the reset was successful.

⚠️ Warning: After the hardware reset, the vacuum cleaner will lose all stored maps of the premises, schedules and settings, and you will have to reconfigure it, as after the first unpacking. If you are selling or transferring the vacuum cleaner to another person, be sure to reset to remove the binding to your Xiaomi account.

Compatible with other smart home applications and systems

Xiaomi Vacuum Cleaner 1S can be integrated not only into the Mi Home, but also into other ecosystems.

To receive a device token (required for Home Assistant):

1. Install the Miio extractor app (available on GitHub).
2. Connect to the vacuum cleaner via Mi Home.
3. Run Miio extractor and follow the instructions to extract the token.

If you use Home Assistant, add to the config:

vacuum:


- platform: xiaomi_miio




host: IP_Adress DUST




token: Your Token

FAQ: Frequent questions about connecting Xiaomi Vacuum Cleaner 1S