Xiaomi Mi Robot Vacuum Connection 1S: full-guide from unpacking to first launch

Xiaomi Mi Robot Vacuum 1S — It's not just a vacuum cleaner, it's a full-fledged home assistant with laser navigation and remote control, but before it starts cleaning your apartment, it needs to be connected properly and synchronized with the app. Many users face difficulties at this stage: the router does not see the device, the application gives an error, the vacuum cleaner stubbornly refuses to connect. In this article, we will discuss all the stages of connection from unpacking to the first cleaning, and also consider typical problems and their solutions.

If you have just purchased a Mi Robot Vacuum 1S Or you plan to do that, bookmark this instruction, and it's not only useful for the initial setup, but also for reconnecting the device after you reset or change your router. We will focus on the nouns of working with the Mi Home application, choosing a server region and setting up a cleaning schedule. Even if you have never used smart equipment before, after reading this article, you will be able to customize the vacuum cleaner without the help of specialists.

Xiaomi Mi Robot Vacuum: 1S Supports only 2.4GHz connectivity. If your router is running in the 5GHz band, you will need to either change your router settings or use a separate network for smart devices.

1.Preparation for connection: what to do before turning on the vacuum cleaner

Before you start setting up, make sure you have everything you need. - Mi Robot Vacuum 1S comes in a compact box with a minimum set of accessories, but some things will have to be prepared independently.

In the package with a vacuum cleaner you will find:

• 🔋 Charging station (dock station) with a power supply unit
• 📶 Power cable (usually without a fork – it must be connected by yourself)
• 🧹 Main cleaning brush (already installed)
• 🔄 Side brush (spare one may be in the box)
• 📄 Instructions in several languages (unfortunately, often without Russian)

What is required additionally:

• 📱 Android smartphone 5.0+ iOS 9.0+ app-access Store/Google Play
• 🌐 A stable Internet connection (preferably via Wi-Fi, not mobile data)
• ⚡ Outlet near the place where the dock will stand (cable short – about 1.5 m)
• 🔧 Screwdriver (may be needed to adjust the side brushes)

Before you first turn on, make sure that the vacuum cleaner does not have transport seals or safety stickers.

1. Contacts at the docking station and vacuum cleaner - they must be clean and not bent.
2. Side brushes - they should rotate freely, not clinging to the body.
3. Main brush – make sure it is not blocked by a transport locker (sometimes it is forgotten to remove).

2. Installation of the Mi Home application and account registration

To control Xiaomi Mi Robot Vacuum 1S You need the Mi Home app (also known as Xiaomi Home) and it can be downloaded for free from official stores:

Download links:

• 🤖 Google Play for Android
• 🍎 App Store for iOS

Once you install the app, you will need to register for a Xiaomi account (if you don’t already have one), which is a must, because without an account, you can’t tie the vacuum cleaner and operate it remotely. 2-3 minute:

Step-by-step registration:

1. Open the Mi Home app and click on “Register”.
2. Choose the method of registration: by phone number or email. For Russia and the CIS, it is more convenient to use the phone.
3. Enter your number in an international format (e.g. +79123456789).
4. Create a password (minimum 8 characters, with numbers and letters).
5. Confirm registration through SMS-code.

If you already have a Mi Account (like a Xiaomi smartphone or a fitness bracelet), you can sign in through it, in which case all your smart devices will be collected in one profile.

💡

When registering, specify a real email - it will be needed to restore access if you forget your password or change your phone number.

3. Connection of the docking station and the first activation of the vacuum cleaner

Before you connect the vacuum cleaner to Wi-Fi, you need to install it correctly on the charging station and turn it on, and this stage depends on how stable the device will return to base after cleaning.

Where to place the docking station:

• 📍 On a flat, solid surface (not on a carpet!).
• 🔌 Near the socket (the length of the cable is limited).
• 🚪 At least 0.5 m from walls and furniture on each side.
• ☀️ Far from direct sunlight and heat sources.

How to install the station correctly:

1. Connect the power supply to the docking station and insert the plug into the socket. The station should light up a blue indicator (this means that the power is served).
2. Put the vacuum cleaner on the station so that the metal contacts on the case match the contacts on the base. You will hear a click.
3. Press and hold the power button on the vacuum cleaner (⏻) during 3-5 A few seconds before the Chinese voice greeting is heard.

Once you turn on, the vacuum cleaner will sound and start charging. 4-5 It is not recommended to interrupt the first cycle of charging, this may affect the capacity of the battery in the future.

4. Wi-Fi connection: step-by-step instructions

Now, to the most important step, connecting the vacuum cleaner to your home network, make sure your router is running in range. 2.4 GHz. If you have a dual-band router (2.4 + 5 GHz may need to split networks or temporarily shut down 5 GHz.

How to connect Mi Robot Vacuum 1S wifi:

Make sure the router is running at 2.4 GHz|

Put the vacuum cleaner at the charging station|

Turn on the vacuum cleaner (blue indicator should burn)|

Connect your smartphone to the same Wi-Fi network to which we will connect the vacuum cleaner-->

Follow the instructions:

1. Open the Mi Home app and click on it «+» in the upper right corner to add a new device.
2. Select the category "Vacuum) → «Mi Robot Vacuum 1S».
3. Click "Plug in" and wait for the app to find the vacuum cleaner. If the search drags on, make sure the vacuum cleaner is on and next to your smartphone.
4. When the vacuum cleaner is found, you will be asked to choose a Wi-Fi network, specify your network and enter a password.
5. Wait for the connection to be completed. The vacuum cleaner should sound a voice signal (in Chinese), and the application will show a message about the successful addition.

If the connection fails, try the following:

• 🔄 Reboot the router and vacuum cleaner (turn off and turn on again).
• 📱 Reinstall the Mi Home app.
• 🌐 Check if the antivirus or firewall is blocking the connection.
• 📶 Try connecting to another 2.4GHz network (e.g., hand out Wi-Fi from your smartphone).

💡

If your router doesn't support 2.4GHz, you'll have to buy an inexpensive optional router specifically for smart devices. TL-WR840N or Xiaomi Mi Router 4A.

5. Set up region and server in Mi Home

After successfully connecting to Wi-Fi, you need to select the server region in the Mi Home app, which depends on what features will be available, as well as the stability of the vacuum cleaner.

Which region to choose:

For most users in Russia and the CIS, the best choice would be the Russia region, and if you want to get the most functionality, you can try China, but that would require you to create a separate account with a Chinese phone number.

How to change the region:

1. Open Mi Home and go to profile (the human icon in the lower right corner).
2. Click on the line with your region (e.g., “Russia”).
3. Select the desired region from the list and confirm the change.
4. Reboot the app.

⚠️ Note: If you change region, all the associated devices will be disabled and will have to be reconnected, and some functions (for example, voice commands in Russian) may become unavailable.

6.The first setup and start cleaning

Once you connect to Wi-Fi and select a region, you can start setting up the vacuum cleaner, and the Mi Home app will show your device card — click on it to open the control panel.

Basic settings before the first cleaning:

• 🗺️ Map of the room: The vacuum cleaner will automatically build the map when you first clean.
• 🕒 Schedule: Set up automatic cleaning time (e.g. daily at 10:00 am).
• 🔊 Volume: Turn off or reduce voice alerts if they interfere.
• 🔋 Cleaning mode: Choose Balanced for regular cleaning or Turbo for heavy pollution.

To start the first cleaning:

1. Place the vacuum cleaner at the charging station and make sure it is fully charged.
2. In the app, click "Clean" (Clean).
3. Select the cleaning area (by default - the entire area).
4. Click "Start" and wait until the vacuum cleaner returns to base.

The first cleaning may take longer than usual, as the vacuum cleaner will build a map of the room. Don't interrupt the process, even if it seems too long. Once completed, the map will be saved, and next time the cleaning will be faster.

💡

If the vacuum cleaner is stuck or can't build a map, help it by moving it to the center of the room and starting cleaning again, and check if it's getting in the way of wires or low furniture.

7.Typical errors and their solutions

Even with the right connection, users sometimes encounter problems, and here are the most common errors and ways to fix them:

Problem: The vacuum cleaner does not connect to Wi-Fi

• 🔌 Make sure the router is running in mode. 802.11 b/g/n (not ac or ax).
• 📵 Check if the router is enabled with Client Isolation).
• 🔄 Reboot the router and vacuum cleaner.
• 📱 Try connecting via another network (e.g. mobile hotspot).

Problem: The app does not find the vacuum cleaner

• 📍 Make sure that the smartphone and vacuum cleaner are nearby (no more). 1-2 meters).
• 🔋 Check that the vacuum cleaner is charged and on.
• 📱 Update the Mi Home app to the latest version.
• 🗑️ Clear the app cache in the smartphone settings.

Problem: The vacuum cleaner is not returning to base

• 📍 Check if the docking station has moved.
• ☀️ Make sure there is no bright light on the way to the base (it interferes with sensors).
• 🧲 Check if magnetic tapes or other obstacles interfere.
• 🗺️ Restart map construction (in the vacuum cleaner settings, select “Clear map»).

⚠️ If the vacuum cleaner constantly loses communication with Wi-Fi, try to attach a static one to it. IP-address in the router settings, which will help to avoid problems when connecting automatically.

8 Additional functions and operating tips

After a successful connection, you can use all the features of the Mi Robot Vacuum. 1S. Here are some useful features that many people don’t know about:

Hidden possibilities of the vacuum cleaner:

• 🎤 Voice control: If you choose the region "China", you can control the vacuum cleaner through Alice (Yandex) or Google Assistant (in English).
• 🧹 Area cleaning: In the application, you can select cleaning only in certain rooms or even select a zone on the map.
• 🔄 Double cleaning: A vacuum cleaner can walk around the room twice for better results.
• 🚫 No-go zones: Configure virtual walls so that the vacuum cleaner does not come into certain places (for example, to a bowl of animal food).

Care tips:

• 🧼 Clean the main brush and filter after each cleaning (this will prolong the life of the vacuum cleaner).
• 🔋 Calibrate the sensors once every 3 months (in the application settings).
• 📱 Regularly update the vacuum cleaner firmware through the Mi Home app.
• 🌡️ Store the vacuum cleaner in a dry place at a temperature of 0 to 40°C.

If you plan to use a vacuum cleaner in a large house or apartment with multiple levels, consider buying additional docking stations. - Xiaomi Mi Robot Vacuum 1S Supports multiple databases, but you will have to buy them separately.

💡

For maximum efficiency, set up your cleaning schedule when you are not at home. The vacuum cleaner works quieter than many people think, but can still interfere with sleep or work.

FAQ: Frequently Asked Questions