Connecting Xiaomi humidifier to Mi Home: instructions with pictures and tips

Xiaomi’s humidifier is not just a household appliance, but a full-fledged smart home device that can be integrated into the Mi Home ecosystem. However, many users face difficulties when connecting for the first time: the app does not see the device, the indicators flash in an incomprehensible way, there are synchronization errors. This article will help you understand all the nuances of the process, from choosing the right model to solving typical problems.

We will not only look at the standard Mi Home connection procedure, but also at alternative ways (e.g. Mi Home Lite or Apple HomeKit for iPhone owners), with a particular focus on device compatibility, automation setup and error solving that are not described in the official documentation. If you just unpacked the Xiaomi Smartmi Air Humidifier or Viomi Humidifier, this will save you hours of nerves.

Unlike most household humidifiers, Xiaomi models require a connection to the application to work properly, without which you will not be able to use remote control, humidity monitoring or integration with other ecosystem devices (for example, with Mi Temperature & Humidity Sensor temperature sensors).

1. Preparation of Xiaomi humidifier for connection

Before you start pairing with Mi Home, you need to follow several mandatory steps, neglecting them often leads to failures in the connection process or malfunction of the device later.

First, check the equipment of your humidifier.

• 📦 The humidifier itself (model is indicated on the sticker at the back)
• 🔌 Power adapter (pay attention to voltage: 220V for Russia/Europe)
• 📄 Instructions in Chinese/English (Russian version is rare)
• 💧 Filter or cartridge (if provided by design)

Secondly, install the device on a flat surface away from heat sources (batteries, heaters) and electronics. The optimal distance to the walls is at least 30 cm. This is important not only for safety, but also for the correct operation of humidity sensors.

Make sure the model is compatible with the Mi Home|

Fill the tank with water (use distilled or filtered)|

Connect the power adapter to the socket|

Install the Mi Home app on your smartphone|

Turn on Bluetooth and Wi-Fi on your phone-->

Pay special attention to the first switch, and after the power is applied, the Xiaomi humidifier should emit an audible signal and start flashing the indicator.

• 🔌 Check if the plug is tightly inserted into the socket
• 🔋 Make sure the water tank is installed correctly (some models have a level sensor)
• 🔄 Try to remove the plug and insert again in 10 seconds.

2. Installation and configuration of the Mi Home app

To connect the Xiaomi humidifier, you will need the official Mi Home app (not to be confused with Mi Fit or Mi Browser).

• 📱 Google Play for Android
• 🍎 App Store for iOS

After installing the application, follow the following steps:

1. Sign up or sign in to an existing Xiaomi account (you can use it to log in) Google/Facebook)
2. Select the region "Russia" (important for the correct operation of servers)
3. Click "Add device" (Icon "+" top-right)
4. In the search box, type the name of your model (for example, “Smartmi Air Humidifier”).

💡

If your model is not on the list, try typing part of the name in English (e.g., "humidifier" instead of "humidifier").

Pay attention to the region in the app. If you make a mistake with the country, the device can connect, but some features (for example, voice control via Alice) will not work. For Russia, the best choice is “Russia” or “Mainland China” (the latter option gives access to advanced settings, but the interface will be partially in Chinese).

3. Step-by-step instructions for connecting the humidifier

When the Mi Home app is ready and the humidifier is on and flashing the indicator, you can start pairing. The whole process takes no more than 5 minutes, if you follow the algorithm:

Step 1. In the Mi Home app, click "Add device" → Choose the category "Smart Home" → "Find your model on the list.

Step 2. Make sure your smartphone is connected to the same 2.4 GHz Wi-Fi network you want to connect the humidifier to. Xiaomi devices do not support 5 GHz networks, which is a key reason for 90% of failed connections.

Step 3. Click "Next" in the app and wait for the animation to appear on the screen asking you to press the button on the device. Most Xiaomi models need:

Hold the power button for 3-5 seconds until the indicator starts to blink quickly

Step 4: Wait for the humidifier tone (one short horn) to beep, which means that the device has entered pairing mode, and the application will start the connection process (can take up to 2 minutes).

Step 5: After successful connection, you will be asked to:

• 🏠 Designate a room (for example, "Bedroom" or "Children's room")
• 🔄 Update the firmware (recommended to be done immediately)
• ⚙️ Set up the basic parameters (target humidity level, operating mode)

4. Compatibility of Xiaomi moisturizer models with Mi Home

Not all Xiaomi-branded humidifiers support Mi Home connectivity, and here is the up-to-date compatibility table for popular models (data for 2026):

If your model is not listed, check its compatibility with the model code (on the sticker at the back of the device). ZNMS or VIOMI Usually support Mi Home and devices with DEERMA They may require additional manipulation.

Some Xiaomi humidifiers are sold in two versions:

• 🌍 Global version (with English support in the app)
• 🇨🇳 Chinese version (requires Mainland China region in Mi Home)

To find out your version, look at the sticker: global devices usually have the Global or Global suffix in their name. EU.

Smartmi Air Humidifier 2|

Viomi Humidifier|

Xiaomi Mi Air Humidifier Pro|

Deerma or other OEM-model|

I haven't bought it yet.-->

5.Uniform humidifier setting after connection

Once successfully paired with the Mi Home, the device will appear in the app's main menu, and you can now customize it to suit your needs.

Target humidity level

• 💧 Optimal range for residential premises: 40-60%
• 👶 For the children's room: 50-60% (but not higher to avoid mold)
• 🌿 For plants: 60-70% (dependant)

In the application, this parameter is configured in the section "Device settings" → "Targeted humidity".

Working hours

Most Xiaomi humidifiers offer three main modes:

• 🌬️ Automatic – the device itself regulates the intensity according to the sensor data
• 💨 Manual – Choose the spray level (usually) 1-3)
• 🌙 Night – quiet mode with subdued lighting

3.Timer and schedule

In the Schedule section, you can program the humidifier to automatically turn on/off, for example:

• ⏰ Turn on 30 minutes before you wake up.
• 🏠 Turn off when no one is home (energy savings)
• 🌡️ Synchronize with temperature sensor (if it is in the ecosystem)

💡

For maximum efficiency, use a humidifier with the Mi Temperature & Humidity Sensor, which will allow you to create automations such as "turn on the humidifier if the humidity is below 45% and the temperature is above 22".°C".

Voice control

If you have a speaker with Alice (like Yandex Station) or Google Assistant, you can link a humidifier to voice control.

1. At Mi Home, go to Profile" → "Settings" → "Voice assistants"
2. Select the right assistant and follow the instructions for linking accounts
3. After synchronization, use commands such as “Alice, turn on the humidifier in the bedroom at maximum power” “OK Google, set the humidity in the living room to 50%”

Typical problems and their solutions

Even with the right connection, users often encounter errors, and here are the most common problems and ways to fix them:

Problem 1: The humidifier is not in the Mi Home

• 🔄 Solution: Reboot the device (pull the plug for 10 seconds) and try to connect again.Make sure you select the correct region in the app.
• 📶 Solution: Check that your Wi-Fi is in the 2.4 GHz range. Turn off temporarily 5 GHz in the router settings.
• 📱 Solution: Give the Mi Home app all the necessary permissions (geolocation, Wi-Fi, Bluetooth).

Problem 2: The humidifier is connected but does not respond to commands

• 🔋 Solution: Check the water level in the tank. Some models, at low levels, block all functions except refueling.
• 🔄 Solution: Update the device firmware in the "Settings" section" → "Update of the PO".
• 🌐 Solution: Check your Internet connection, and without it, some functions (like remote control) won't work.

Problem 3: Blinking red light

Red LEDs usually signal an error.

• 🔴 1 blinking - low water level
• 🔴🔴 2 blinkings - a humidity sensor error
• 🔴🔴🔴 3 blinkings - fan problem
• 🔴🔴🔴🔴 4 Blinks – Wi-Fi connection error

💡

If the humidifier flashes red and doesn't respond to the buttons, try resetting it to the factory settings. 10-15 seconds until the indicator starts flashing yellow.

Problem 4: The humidifier is constantly shutting down

⚠️ Note: If the device is disconnected through 10-15 minutes of work, check the energy saving settings in the Mi Home application. in the section "Device settings" → "Energy saving should be chosen as a performance mode, not a savings mode".

7. Alternative ways of connecting

If the standard Mi Home method doesn't work, you can try alternatives, and they're also useful if you want to integrate the humidifier into other smart home ecosystems.

Method 1: Connecting with Mi Home Lite

Mi Home Lite is a lightweight version of the main application, which sometimes works better with older device models, and the connection algorithm is similar, but the interface is simplified.

• 📱 Mi Home Lite for Android

Method 2: Integration with Apple HomeKit (for iPhone)

Some models (e.g. Viomi Humidifier) support HomeKit over the Mi Home Bridge.

1. Connect the humidifier to the Mi Home as usual
2. In the device settings, find the option "Add to HomeKit"
3. Scan it. QR-code using the Apple Home app

Method 3: Using third-party firmware (for advanced)

For chip-based models ESP8266 (for example, some OEM-You can flash alternative software like Tasmota or ESPHome:

• 🔧 Full control of the device via the web interface
• 🌐 Integration with Home Assistant, OpenHAB and other systems
• 📊 Extended statistics and logging

⚠️ Warning: Third-party firmware voids warranty and may cause your device to fail, only if you are confident in your skills and willing to take risks.

8. Optimizing the operation of the humidifier in the Xiaomi ecosystem

To make the humidifier work as efficiently as possible, it should be integrated with other Xiaomi devices. Here are some useful automations that you can configure in the Mi Home:

Automation 1: Synchronization with a humidity sensor

If you have a Mi Temperature & Humidity Sensor, make a rule:

1. Open Mi Home → "Automation" → "Add"
2. Select the condition: "Humidity below 45%" (from the sensor)
3. Select the action: "Enable the humidifier" at medium power
4. Add an additional condition: "Only if someone is home" (by motion sensor)

Automation 2: Night mode on schedule

Set up automatic switching to night mode:

• ⏰ Reactivation time: 23:00
• 🌙 Action: “Establish the night mode'"
• 🔕 In addition: “Deactivate the lighting"

Automation 3: Low water level notifications

To remember to add water, create a notification:

1. Condition: "Water level below 10%" (if the sensor is supported)
2. Action: Send push notification to your phone
3. Additional: "Enable red light" on the humidifier

Automation 4: Connection to air conditioning

If you have a Xiaomi Mi Air Conditioner, you can set up the collaboration:

• ❄️ When the air conditioner is turned on in cooling mode, the humidifier automatically reduces the intensity (so as not to create excess humidity)
• 🔥 When the air conditioner is working on heating, the humidifier increases the power (the air from the heaters dries more strongly)

💡

To create complex automations with multiple conditions, use the Mi Home Automation app (available in the same Xiaomi account), which allows you to combine data from different sensors and devices.

FAQ: Frequent questions about connecting Xiaomi moisturizer