Modern smartphone users are increasingly paying attention to the smart home ecosystem, and Xiaomi scales occupy one of the leading places in popularity. Owners of Samsung Galaxy devices often face the need to integrate health data into a single system, but the process of initial synchronization can raise questions for an untrained user.
In this guide, we will take a closer look at the algorithms needed to successfully pair devices, and the nuances of working with software in the current constraints of app stores. You will learn how to avoid common errors when registering for an account and why sometimes standard device search methods do not work on the One UI shell. Accurately following the instructions will allow you to start tracking the dynamics of weight and body composition in the first minutes after unpacking.
To get started, make sure your scales are charged or have fresh batteries and your Samsung smartphone is in close proximity to them.The setup process takes no more than five minutes if all system resolutions are set up correctly. Next, we move on to choosing the software that will bridge the gap between your phone and the measuring device.
Selection and installation of management applications
The first and most important step is to install the right software. Historically, the main application for working with the Xiaomi eco-compat was Mi Fit, which was later renamed Xiaomi Wear (or Zepp Life depending on the region and version). It is important for Samsung users to understand that the official Google Play store may have restrictions on the display of some applications depending on the region of the account.
If you can’t find the app directly in the store, try changing the region of your Google Play account or using alternative proven sources. APK-Install programs only from trusted sources to avoid malicious code. Once you install the application, launch it and create a new account or log in to an existing one using a phone number or email.
Note that for the app to work properly on Samsung One UI smartphones, an extended set of resolutions is required. Android, especially in newer versions, strictly controls access to geolocation and background work of applications, which directly affects the stability of the connection with the weights.
⚠️ Warning: Don't ignore permission requests on first run.Without geolocation and Bluetooth access, the app won't be able to detect scales even if they're on.
Preparing Samsung smartphone to pair
Before trying to find a scale, you need to properly configure the smartphone itself. Samsung devices often include the “Fast Connection” feature, which can intercept control of Bluetooth devices and interfere with third-party applications. It is recommended to disable the automatic connection of new devices in Bluetooth settings.
It is also critical to enable geolocation (GPS).The Bluetooth Low Energy (BLE) protocol that Xiaomi scales use requires an active GPS module to scan peripherals.Without GPS enabled, the app simply won't start the search process and you'll see the load indicator rotate endlessly.
Check your phone’s operating system version. Modern versions of Xiaomi Wear or Zepp Life require Android version 6.0 or higher to work smoothly, but for full functionality, it’s better to use Android 10 or later. Make sure that all system components are updated on your smartphone, especially Bluetooth drivers.
In the battery settings of the Samsung smartphone, you need to find the installed weights app and allow it to work in the background. One UI system aggressively saves charge and can "kill" the synchronization process if the application is not given the appropriate permission. Go to Settings → Applications → [Your weights app] → Battery and select the "No Limits" option.
☑️ Preparing Samsung for Connection
The process of pairing the scales with the phone
Now that the preparation is complete, you can move to direct pairing. Turn on the scales by inserting batteries or connecting them to charge (depending on the model, for example, Mi Body Composition Scale 2 or Mi Smart Scale 2). The scale display should appear the logo "mi" or flashing Bluetooth symbol, which signals readiness for pairing.
Open the app on your smartphone and go to add devices, usually the + button or the Profile tab on the bottom menu, and the app will start scanning the available devices within range, and it's important not to push the scales with your feet at this point, as some models go into measurement mode and are no longer visible for pairing.
When your device appears on the list (usually called the Mi Body Composition Scale or Xiaomi Scale), click on it. The phone screen may have a request to pair with the code or simply confirm the action. Confirm the request, and the setup process will take a few seconds.
Once the connection is successful, the scales may suggest updating their firmware. The firmware update is an important step that corrects calibration errors and improves data stability. Don't interrupt the upgrade process and keep the phone near the scale until it's complete.
What to do if the scales are not found?
Customization of user profiles and calibration
Xiaomi’s smart scales allow you to store data for up to 16 users, but to correctly calculate body composition (fat percentage, muscle mass, water), each user needs to create a profile indicating height, age and gender.
When you first weigh in, stand barefoot on the scale, spreading the weight evenly across all four sensors, and it takes a few seconds to measure, and then the data is displayed on the scale screen and synced with your smartphone, and the app will analyze the measurements and assign a measurement to your profile.
For guest mode or if the scales are used by different people, the app automatically recognizes the user based on the weight and measurement history. However, the accuracy of recognition depends on the uniqueness of each family member. If the weights of the users are similar, the system can confuse the profiles, so it is recommended to check the data after each weighing.
| Parameter | Description of the impact on calculations | Importance of customization |
|---|---|---|
| Growth | Key parameter for calculating BMI and percentage of fat | Critically important |
| Age. | Affects metabolic norms and calculation of muscle mass | Tall. |
| Paul | Determines formulas for calculating the distribution of adipose tissue | Critically important |
| Figure type | Calculates calculations for athletes or people with special needs | Medium |
Remember to calibrate the scales periodically if you notice any errors in the readings, just put them on a hard, flat surface (tiles, laminate flooring, flooring) and wait for them to turn on. Carpet coatings can distort the readings, because they absorb some of the pressure on the sensors.
💡
For maximum accuracy, weigh at the same time of day, preferably on an empty stomach in the morning and after using the toilet, which minimizes the impact of food and water on the final figures.
Integration with Samsung Health and Google Fit
One of Samsung users’ main goals is to combine data in the Samsung Health app. Unfortunately, direct integration between Xiaomi (Zepp Life/Mi Fit) and Samsung Health apps does not exist due to ecosystem competition.
The most reliable method is to use an intermediary application, such as Health Sync or Sync for Mi Band, which can take data from the Xiaomi application and transfer it to Samsung Health, you will need to install such an application, log in to both services accounts and configure the sync direction.
An alternative way is sync with Google Fit. The Zepp Life and Mi Wear apps have a built-in function to export data to Google Fit. Since Samsung Health can import data from Google Fit, you can build a chain: Libra → Mi Fit → Google Fit → Samsung Health. This will allow you to see all the statistics in one place.
To set up export in Google Fit, go to the Xiaomi app profile, select Add Accounts or Linked Apps and select Google Fit. After authorization, enable synchronization of all the necessary parameters: weight, BMI, fat percentage and others.
⚠️ Note: When using third-party sync applications (Health Sync and analogs), data may be transmitted with a delay. Make sure that the intermediary application has permission to work in the background, otherwise the automatic sync will not work.
Solving common problems and errors
In the process of operation, users can face a number of typical problems, one of the most common is that the scales stop synchronizing with the phone, most often due to the fact that the scales are "tied" to another device or Bluetooth module of the phone is frozen, in which case it helps to reboot the smartphone and remove the batteries from the scales for 10-15 seconds.
Another common problem is the “Unconnected” error when you try to log in to an app on Samsung, which is often due to blocking Google services or network problems. Try switching from Wi-Fi to mobile Internet or vice versa. Also make sure that the date and time on the phone are set automatically.
If the scales show weight but don't show body composition (fat percentage, etc.), check if you're barefoot. Bioimpedance analysis, which measures body composition, requires skin to contact electrodes on the surface of the scales. Socks or shoes make this type of measurement impossible.
In case of persistent connection problems on Samsung, try clearing the cache of the Xiaomi Wear or Zepp Life app through the Android settings menu. Sometimes accumulated temporary files interfere with the correct operation of the Bluetooth scanner.
💡
The stability of smart scales depends on the correctness of the power saving settings and resolutions in the Android system, not on the malfunction of the equipment itself.