How to connect Xiaomi humidifier to Alice: full instructions with photos and tips

Xiaomi's modern humidifiers are not just appliances, they're full-fledged elements of the smart home ecosystem. Being able to control them through Alice makes it even more convenient to use them: just say, "Put the humidifier on 60 percent," and the device will execute the command. However, many users have difficulty in first setting up: the app doesn't see the device, Alice refuses to recognize it.

In this article, we will look at all the stages of connection, from device preparation to voice command settings, and focus on common errors (such as incompatibility between Mi Home and Yandex accounts) that block synchronization, and learn how to configure automatic scenarios, such as turning on the humidifier when humidity drops below 40%.

Xiaomi Smartmi Air Humidifier 2, Deerma Humidifier JSQ5 Or another one of the line, the manual will do. Older devices (released before 2020) may require additional steps, which we'll mention, too.

—— • —— • ——

1. Checking the compatibility of Xiaomi moisturizer with Alice

Not all Xiaomi humidifiers support Alice integration, but the basic requirement is that the device must work through the Mi Home app (or Mi Home Lite for some regions) and have remote control.

• 🔹 Supported models: Smartmi Air Humidifier 2/3, Deerma JSQ5/JSQ6, Xiaomi Mi Air Humidifier Pro, Viomi Humidifier (series) V1-V3).
• 🔹 Incompatible devices: humidifiers without a Wi-Fi module (e.g. Xiaomi) CJXJSQ02ZM mechanically controlled or manufactured before 2019.
• 🔹 Regional restrictions: if your Mi Home account is linked to China (cn) and Alice only works with the Russian region (ru), sync will not be possible.

To check the model, look at the sticker on the bottom of the device or in the documentation. If it says Wi-Fi 2.4 GHz is a good sign. Humidifiers with only 5 GHz support (for example, some versions of Deerma Humidifier). JSQ6) You may not be able to connect to some routers.

⚠️ Note: If your humidifier is purchased on AliExpress and has firmware for the Chinese market, before setting up, be sure to change the region in Mi Home to Russia (instructions below.

—— • —— • ——

2.Device Preparation: What to Do Before Connecting

Before you connect the humidifier with Alice, follow a few mandatory steps. This will save time and eliminate errors such as "Device not found" or "Can not add to Yandex.Smart Home."

Download and update the Mi Home app to the latest version|

Make sure the humidifier is plugged into the socket and is in standby mode (the indicator flashes)|

Connect your smartphone to a 2.4 GHz Wi-Fi network (5 GHz not supported by most models)|

Check that your Mi Home account is linked to the region of Russia or Europe|

Shut down. VPN Proxies on the phone (they can block the connection)-->

Pay special attention to the region of your Mi Home account, if you chose China (cn) when registering, change it:

1. Open Mi Home → Go to profile (the icon of the person in the lower right corner).
2. Click on the line with the mail → Region.
3. Choose Russia (or Europe if you don’t have Russia).
4. Confirm the region change. Attention: after that, all the devices will shut down and they will have to be added again!

If your humidifier has already been connected to Mi Home in China, remove it from the app before changing your region, otherwise it may disappear from the list forever after the change.

—— • —— • ——

3. Connecting the humidifier to the Mi Home app

Now, we're going to add the device to the Mi Home, and this is a mandatory step, because without it, Alice can't see the humidifier.

1. Turn the humidifier on. Wait for the indicator to flash orange (connection waiting mode).
2. Open Mi Home → press + (add) → Choose the category Moisturizer.
3. The app will suggest you select a model. If yours isn't on the list, select Another and type the name manually.
4. Connect to the device’s temporary Wi-Fi network (the name will be type) XIAOMI-XXXX). Return to Mi Home and wait for the setup to be completed.

If you fail to add the device at the connection stage, try:

• 🔄 Reset the humidifier (remove the plug for 10 seconds).
• 📶 Switch your smartphone to mobile internet (sometimes Wi-Fi blocks the connection).
• 🔧 Manually indicate IP-Router address in the humidifier settings (relevant for Smartmi Air Humidifier 3).

Once added successfully, the device will appear in the Mi Home main menu. Make sure it's online (the cloud icon must be active). If the cloud is gray, check your Internet connection.

💡

If the humidifier is not connected to Wi-Fi, try turning off the Smart Connect function (combining 2.4 GHz and 5 GHz into one network) in the router. Many Xiaomi models do not know how to work with such networks.

—— • —— • ——

4. synchronization of Mi Home with Yandex.Smart Home

Now, we're going to link Mi Home to the Yandex ecosystem, and that will allow Alice to operate the humidifier.

1. Open the Yandex app with Alice → Go to the Smart Home section (home icon in the lower menu).
2. Press. + Add the device → Other devices → Find Xiaomi Mi Home.
3. Enter the username and password from your Mi Home account (the same as in the application).
4. Allow access to the devices. After that, all compatible gadgets will appear on the list, including the humidifier.

If at this stage there is an error Not able to connect to the service, check:

• 🔐 Correct login / password (sometimes helps to change the password in Mi Home).
• 🌍 Account region (should coincide with the region in Yandex.Smart Home - Russia).
• 📱 Availability of the latest version of the Yandex application (update in the App) Store/Google Play).

After successful synchronization, the humidifier will appear in the list of Yandex.Smart Home devices, and you can now control it through an app or voice.

⚠️ Note: If you have two-factor authentication in Mi Home, temporarily disable it before connecting to Yandex. SMS authorization.

—— • —— • ——

5.Tune voice commands for Alice

So that Alice understands commands like "Put the humidifier on top," you need to set up aliases and rooms in Yandex.Smart Home. Here's how to do it:

1. Open the device in the Yandex application → press the gear (settings).
2. In the Title field, specify a convenient name, such as “Bedroom Humidifier” (this will help Alice distinguish it from other devices).
3. In the Room section, select the actual location (e.g. Bedroom) for commands like "Switch on the bedroom humidifier."
4. Save the changes and wait for the synchronization (can take up to 5 minutes).

Now you can test voice commands. Examples of working phrases:

• 🎤 «Alice, turn on the 50 humidifier%».
• 🎤 «Alice, turn off the humidifier in the living room».
• 🎤 «Alice, set humidity 60%».
• 🎤 «Alice, what is the humidity level in the bedroom? (if the device has a hygrometer).

If Alice doesn't respond to commands:

• 🔄 Reboot the humidifier and router.
• 📛 Check that the device settings in Yandex.Smart Home have switched on Voice Management switch.
• 🗣 Try paraphrasing the command (for example, instead of “on” say “run»).

—— • —— • ——

6. Creation of automatic scenarios

One of the biggest benefits of a smart home is automation, so you can set the humidifier up so it turns on when the humidity drops below 40 percent, or it turns off at night, and here's how you create a scenario:

1. In the Yandex app, go to Smart Home → Scenarios → Create a script.
2. Choose Automatic (if necessary by condition) or Manual (if on command).
3. Add a condition (e.g., “Humidity” < 40%" or "Time - 22:00»).
4. Add the action: select a humidifier and specify the parameters (enable, set the power, etc.).
5. Save the script and activate it.

Examples of useful scenarios:

• 🌡 Humidity support: “If humidity is maintained” < 40%, turn on the humidifier at 60%».
• 🌙 Night mode: "If it's 23:00, turn the humidifier on to a minimum and set the humidity 50%».
• 🏠 Energy savings: If no one is home (by geolocation), turn off the humidifier».
• ☀️ Smart ventilation: If the window is open (on the sensor), turn off the humidifier».

To create complex scenarios (for example, with multiple conditions), use the Mi Home app. There is more flexibility, but the interface is less intuitive. In Yandex.Smart Home, it is easier to set up basic automations.

💡

The scenarios in Yandex.Smart Home only work when the Internet connection is active, and if Wi-Fi is turned off, the automation will stop working until the connection is restored.

—— • —— • ——

7. Solving common problems

Even with the right setup, you can have failures, and here are the typical errors and ways to fix them:

If nothing helps, try resetting the humidifier to factory settings:

1. Turn the device off the socket.
2. Press the power button for 10 seconds (before the beep).
3. Connect to the socket and repeat the setting from scratch.

For Smartmi Air Humidifier 3 models, the reset is performed via the app: Device settings → General. → Reset.

—— • —— • ——

FAQ: Frequent questions about connecting Xiaomi moisturizer to Alice