Connecting Xiaomi TV to Yandex Mini Station: all ways and solutions to problems

Why Yandex Mini Station and Xiaomi TV are the perfect pair for a smart home

Voice control is no longer a fantasy: the combination of Yandex Mini Station and Xiaomi TVs with MIUI TV allows you to turn on TV, switch channels, adjust volume and even run applications — all this with voice. But many users face difficulties when connecting for the first time: devices “don’t see” each other, synchronization errors occur or voice commands are ignored. In this article, we will analyze all the current ways of connecting (including hidden functions) and give a checklist for troubleshooting.

It is important to understand that Yandex Station Mini works with Xiaomi TVs on three protocols: Wi-Fi Direct (for voice control), HDMI CEC (for basic commands via remote control) and Bluetooth LE (for advanced functions in new models). The choice of method depends on the year of release of your TV and the firmware version. For example, Mi TV 4S models 2020 and later support automatic synchronization through the Xiaomi cloud, whereas older TVs (until 2019) may require manual tuning.

Before you start, check:

• 📺 Your Xiaomi TV is connected to the same Wi-Fi network as Yandex Mini Station (both devices must be on the same subnet, for example 192.168.1.x).
• 🔄 The smart home mode is enabled on the TV (Settings → Smart Home → Device Management).
• 🗣️ In the Yandex app (on a smartphone), the station is tied to the same account as the TV.

Method 1: Connect via Yandex application (the easiest method)

This method works for most models of Xiaomi TV 2020 and later, the main condition is that the TV must be connected to the Xiaomi account (via Settings → Account) and have the latest firmware version.

1. Open the Yandex application on your smartphone and go to the Devices → Add the device.
2. Select the TV from the list of supported devices.
3. Follow the instructions on the screen: the app will automatically find your Xiaomi TV on the local network.
4. Confirm the connection on the TV (a request will appear with the pairing code).

If the TV is not on the list, check:

• 🌐 The network detection setting is enabled on the TV (Settings → Network → Additional).
• 🔄 The Yandex app has updated your account data (re-enter profile).
• 📱 Bluetooth and Geolocation are enabled on the smartphone (necessary for device search).

If you have a Redmi Smart TV, you may need additional confirmation via Mi Home.

1. Open the Mi Home app and find your TV in the device list.
2. Go to Device Settings → Compatibility with other systems.
3. Activate the option to Allow management through third-party services.

Method 2: Manual HDMI CEC connection (for older models)

If your Xiaomi TV is released before 2019 (e.g., Mi TV 4A or Mi TV 4), chances are it doesn’t support direct voice control via Yandex Mini Station. However, you can configure basic commands (on/off, volume control) via the HDMI CEC protocol. This method requires the station to physically connect to the TV via the HDMI-ARC port.

Instructions:

1. Connect Yandex Mini Station to the HDMI ARC port on your TV (usually signed or highlighted in color).
2. Enable HDMI CEC on your TV: Settings → System → HDMI Management → Enable HDMI CEC
3. In the Yandex app, go to Station Settings → Devices → Add TV and select Connect via HDMI.
4. Follow the instructions on the screen (the station will send a test signal to the TV).

⚠️ Warning: If the station stops responding to the "turn on TV" commands after connecting via HDMI CEC, check the Standby Mode setting HDMI in the TV menu. On some Xiaomi models, this setting is disabled by default, which prevents the device from waking up on the CEC signal.

💡

If the TV doesn’t respond to commands via HDMI CEC, try turning off and re-enable the option in the settings. Sometimes resetting HDMI settings on the TV helps (Settings → System → HDMI Reset).

Method 3: Bluetooth Connection (for new models)

Xiaomi 2022 and newer TVs (such as Mi TV Q2 2023 or Xiaomi TV A Pro) support connection to Yandex Mini Station via Bluetooth LE. This allows you to use advanced voice commands such as:

• 🎬 "Put Netflix on the TV"
• 🔊 "Revenue volume by 20%"
• 🔍 "Find the Lord of the Rings movie on TV."

How to set up:

1. On the TV, go to Settings → Bluetooth and Devices → Add the device.
2. Activate the search mode on Yandex Mini Station (say: "Alice, find new devices").
3. Select the station from the list of found devices and confirm pairing.
4. In the Yandex app, check that the TV is displayed in the Smart Home section.

Limitations:

• 🚫 Not all Xiaomi TV models support Bluetooth LE (check your model specifications).
• 🔋 The conjugation can break when you turn off the TV, in which case you have to reconnect.
• 📶 The distance between the devices shall not exceed 5 meters (otherwise command delays may occur).

The answer to the problem is why the station can’t see the TV

If Yandex Mini Station doesn’t find your Xiaomi TV, the reasons may be as follows:

⚠️ Warning: Some Xiaomi TV firmware (especially Redmi Smart TV) resets Yandex Station compatibility settings after the update. If the connection is lost after the update, reset the Smart Home settings on your TV (Settings → Smart Home → Settings Reset) and re-pair.

If nothing works, try an alternative method through Mi Home:

1. Open the Mi Home app and find your TV.
2. Go to Device Settings → Integration.
3. Select Yandex and follow the authorization instructions.
4. After synchronization, the TV will appear in the Yandex app.

💡

If the TV is connected to Yandex Stations via Mi Home, some voice commands (such as running specific applications) may not work smoothly, in which case it is recommended to use a direct method of connecting via Wi-Fi or Bluetooth.

Advanced settings: voice commands and scripts

Once you've successfully connected, you can configure custom scripts and voice shortcuts, for example, "Alice, turn on the movie night" can simultaneously:

• 🎬 Turn on the TV and start KinoPoisk HD
• 🔊 Set the volume to 50%;
• 💡 Turn off the lights (if smart lamps are connected).

How to create a script:

1. In the Yandex app, go to Smart Home → Scenarios → Create a script.
2. Add a condition (such as a voice command).
3. Select actions for the TV (from the list of supported commands).
4. Save the script and test it out.

List of supported voice commands for Xiaomi TV:

• 📺 "Switch on/off the TV"
• 🔊 "Lip up/down the volume by [value]"
• 📌 "Switch to [number] channel"
• 🎬 Open [app name] (e.g. YouTube, Netflix)
• 🔍 "Find [movie title/series]"
• ⏸️ "Put it on hold."
• ⏭️ "Next episode"

⚠️ Warning: Commands like "turn on subtitles" or "fast forward for 5 minutes" are not supported at the integration level of Yandex Station with Xiaomi TV.

Firmware Update: Why It’s Important to Connect

If your Xiaomi TV is not connected to Yandex Mini Station, the first recommendation is to update the firmware. The manufacturer regularly releases patches that correct compatibility errors. For example, an update to the Mi TV Q1 from March 2026 fixed an error that caused the station to not control volume through HDMI CEC.

How to update firmware:

1. On the TV, go to Settings → About TV → System Update.
2. Click Check for updates.
3. If a new version is available, confirm the installation (the TV will restart).

If the automatic update does not work:

• 📥 Download the latest firmware for your model from the official Xiaomi website (Support → TV).
• 📁 Copy the file onto a flash drive (in FAT32 format) and paste it into the USB- port of the TV.
• 🔄 In the update menu, select Update with USB.

Important nuances:

• 🚨 Do not turn off the TV during an upgrade (this may result in system failure).
• 🔄 After the update, reset your Smart Home settings and reconnect to the station.
• 📡 If the sound is lost from HDMI ARC after the update, check the sound settings (Settings → Sound → Out HDMI).

FAQ: Frequent questions about connecting Xiaomi TV to Yandex Mini Station