Modern users are rarely content with just watching movies, but they are eager to create a single ecosystem where voice assistants control lighting, climate and multimedia. Integrating Xiaomi TV into Yandex’s Smart Home system opens up opportunities for voice content search and playback control through Alice devices. However, the setup process is not always smooth, as it requires certain technical conditions and sequence of actions.
The main difficulty is that direct integration of Android TV Xiaomi, with its Yandex ecosystem, requires third-party bridges or specific network settings. Unlike TVs with built-in Yandex TV, Xiaomi models operate on their own shell, which requires the user to dive deeper into the settings of the router and accounts. It is critical to have all devices on the same local network (LAN) net-mask.
In this article, we will take a look at all the steps of connectivity, from basic requirements to fine-tuning through the developer console, how to get around the limitations of regional firmware versions and make the system work steadily. Get ready to work with network settings and developer accounts to gain full control over media content in voice.
Technical requirements and equipment preparation
Before you start software setup, you need to make sure that your hardware meets the necessary criteria. Model compatibility varies: most Xiaomi TVs running Android TV 9.0 and higher support the necessary data exchange protocols. Older versions of the operating system may not have the required APIs to work stably with external voice assistants.
Special attention should be paid to the router. To work properly, the router must support Wi-Fi 5 (802.11ac) or later, and also have a client isolation feature (which, on the contrary, you need to turn off). If your devices are in different subnets or guest Wi-Fi areas, it will not be possible to detect the TV by the Station.
- 📺 Xiaomi TV with Android operating system TV version 9.0 or later.
- 🔊 Smart speaker Yandex Station (any model) or smartphone with the application Yandex.
- 📡 Router with support for 2.4 GHz and 5 GHz, operating in a single network.
- 🔌 Stable Internet connection at a speed of at least 10 Mbps for command transfer.
⚠️ Note: If your router gives away two different networks (e.g, Xiaomi_2.4G and Xiaomi_5G), Make sure that both the TV and the station are connected to the same frequency, or combine them into a single network with the same name (SSID) router-setting.
Also check for Mi Account. Many Xiaomi system features and services require you to log in to your Mi Account. If you haven't logged in before, do so in the settings section of your TV to avoid blocking some features during the integration process.
Network and Local Access Configurement
The foundation of a successful connection is the correct configuration of the local network. DLNA Chromecast built-in, which Xiaomi uses for broadcasting, requires devices to “see” each other at the level of the device. IP-Often the problem lies in the router's security settings, which by default can block fireworks.
You need to go to your router’s settings (usually 192.168.0.1 or 192.168.1.1) and find the Wi-Fi or LAN section. This is where you make sure that AP Isolation is disabled, which is designed for guest networks so that users don’t see each other’s devices, but for a smart home, it’s the main enemy.
After checking the router, go to the settings of the TV itself. → Network and Internet, check the status of the connection, preferably, the TV will get static. IP-address or had a reserved address in DHCP-router server so that the routes do not change after the reboot.
| Parameter | Recommended value | Where to find out |
|---|---|---|
| Type of connection | Wi-Fi 5 GHz or LAN cable | Tablet settings |
| IP-address | Static or DHCP reserve | Router settings |
| Isolation of clients | Disabled (Disabled) | Wi-Fi router settings |
| UPnP | Included (Enabled) | Router settings |
If you use complex network configurations, such as a VLAN or a separate subnet for IoT devices, you will need to set up firewall rules that allow traffic between network segments. For most home users, just make sure that all devices are connected to the main home Wi-Fi.
💡
Use an Ethernet cable to connect your TV if possible.The wired connection provides the stability needed to transmit control commands without the delays that often occur when a Wi-Fi channel is congested.
Registration of devices in the Yandex application
Once the network is ready, you can go to the software part, the process starts with the mobile application "Yandex" or "Yandex House", this is where you associate accounts and search for devices on the local network, make sure that the application is updated to the latest version through Google Play or the App Store.
In the app, go to Devices and click Add Device. The system will tell you to select a manufacturer. You'll need to find Xiaomi or Mi Home. However, for TVs, a universal driver or LAN search is often used if there is no direct integration in the list.
If automatic search doesn’t find the TV, try using the “Device Not Found” function and select “TV” or “Android” type. TV». The system may offer scanning QR-code or enter code that appears on the TV screen. Follow the instructions on the screen, entering data into the application.
- 📲 Open the Yandex application and go to the “Services” tab».
- 🏠 Select the Smart Home section and click the plus to add.
- 🔍 In the search, type “Xiaomi” and log in to your Mi Account.
- ✅ Confirm access rights for device management.
It is important to understand the difference between control via an IR port (if the station has an IR transmitter) and control over Wi-Fi. We configure Wi-Fi control, which allows you not only to switch channels, but also to run applications, control volume and type text voice.
⚠️ Note: When you authorize your Mi Account in Yandex, you give you access to device management. Make sure you use the same account region as the settings on your TV, otherwise sync may not be available.
☑️ Checking before synchronization
Addressing regional constraints
One of the most common problems is regional mismatch: Global versions of Xiaomi TVs and Russian Yandex servers can conflict if the settings of the TV are “China” or other than your actual location, which is often found when buying equipment imported from abroad.
To fix this, you need to change the region in your TV settings. Go to Settings → Device → About TV → Region. If the desired region is not on the list, you may need to reset your settings or use special utilities to change the region (Region Changer), but this is a risky operation.
A safer method is to create a new Mi Account with a region of Russia or Europe and log in on your TV, which often solves the problem of visibility of the device in foreign services, but remember that changing your account will delete the data of the previous user on the device.
Sometimes the problem is in DNS-Try to prescribe in the settings of the TV network. DNS Google (8.8.8.8) or Yandex (77.88.8.8) will help the device to better determine its location and find authorization servers.
What if the region does not change?
Alternative methods of integration
If the standard method through the Mi Account does not work, you can use the Google Cast protocol. Yandex Station can manage devices that see themselves as Chromecast. To do this, you need to find the “Google Cast” or “Translation” section in the settings of the Xiaomi TV and activate it.
In this case, the control will be not as a native device Xiaomi, but as a media player, you can say, "Alice, turn on YouTube on the TV," and the video will run. However, the control of the system functions of the TV (volume itself, turn off) can be limited.
For advanced users, there is a method of integration through the Home Assistant platform. By installing this system on a separate server (for example, Raspberry Pi), you can connect Xiaomi TV and Yandex Station through local integrations, gaining maximum control and response speed, independent of the cloud services of manufacturers.
- 🌐 Google Cast Method: Suitable for Launching Video Content.
- 🏠 Home Assistant: Gives you full control of the system for experienced users.
- 📱 IR remote: if the station has an IR port, you can train it to TV teams.
- 🔌 HDMI-CEC: Allows you to control the station’s TV remote (if supported).
Using HDMI-CEC is a great way to make it easier to control, so if your Station is connected to your TV via HDMI (as a set-top box), turn on the CEC function in the settings of both devices, then when you turn on the Station, the TV will turn on, and the station remote will be able to control the volume.
💡
The most stable solution for everyday use is the combination of native integration via Mi Home (for device status) and content management via Chromecast built-in.