How to connect Xiaomi TV to smart home Yandex: a complete guide with voice control settings

Why integrate Xiaomi TV into Yandex ecosystem?

Xiaomi’s modern TVs are not just content-watching devices, but full-fledged smart home elements. Connecting them to the Yandex ecosystem opens up new possibilities, from voice control via Alice to script automation (like turning on the TV when you get home or syncing with smart lights), but how do you do it right to avoid errors and get the most features?

In this article, we will discuss all the ways of integration – from basic configuration through the Yandex Smart Home application to advanced scenarios using Mi Home and third-party services. TV, Redmi Smart TV, Mi TV Q-series) with Yandex IoT protocol, as not all devices support direct synchronization, and you will learn how to get around the restrictions if your TV is not displayed in the list of available devices.

Before you start, make sure your TV is running on the latest firmware version. MIUI TV (current for 2026 - not lower than 3.0.12.This is critical for stable work with voice assistants and cloud services of Yandex.

What Xiaomi models support connection to Yandex Smart Home?

Not all Xiaomi TVs are compatible with the Yandex ecosystem, and the following series are officially certified (June 2026):

• 📺 Mi TV Q2/Q2Q (2022–2026 full support for voice control and scenarios.
• 📺 Mi TV P1/P1E — requires firmware updates to MIUI TV 3.0.15+.
• 📺 Redmi Smart TV X (models from 2023) – limited functionality (no channel management).
• 📺 Mi TV A2/A2L — only basic commands (on/off, volume control).

Models older than 2021 (Mi) TV 4S, Mi TV 4A) Not officially supported, but they can be connected via workarounds (see "Alternative Ways»).

⚠️ Note: If your model is not listed in the table, check it for compatibility through the official list of Yandex IoT devices. Some TVs may require manual binding via Mi Account.

Preparing Xiaomi TV for Connection

Before integrating into a smart home, several mandatory steps must be taken:

1. Update your firmware. Go to Settings. → On TV. → Update the system and install the latest version. TV Q-series 3.0.12 is the minimum version for Redmi Smart TV — 2.5.8.
2. Connect your TV to the same Wi-Fi network as a Yandex speaker or smartphone. Use 2.4 GHz (some models don't support 5 GHz for IoT devices).
3. Activate your Mi Account. Without binding to Mi Account, the TV will not be able to sync with the Xiaomi cloud, and therefore with Yandex.

If the TV was already in use, reset to factory settings: Settings → All settings → System system → Resetting and remediation → Reset all settings. This will eliminate possible conflicts with previous connections.

Update the firmware to the latest version

Connect to 2.4 GHz Wi-Fi

Tie up a Mi Account

Reset the settings (if used previously)

Check the compatibility of the model-->

⚠️ Warning: If the TV requests a region after the reset, choose Russia or Europe. Choosing China or India may block access to Yandex services.

Step-by-step: connection via Yandex Smart Home application

The most reliable way to integrate is the official Yandex Smart Home app (available for Android and iOS).

1. Install the app from the AppGallery or App Store.
2. Sign in under the same Yandex account as on the column or in the browser.
3. Click Add Device → Television → Xiaomi.
4. Select your model from the list. If it's not available, press the Other device and enter the data manually.
5. Follow the instructions on the screen: confirm the connection on the TV (the pairing code will appear).

Once successfully anchored, the TV will appear in the app's main menu.

• 🎤 Control your voice through Alice (Alice, turn on the TV in the kitchen»).
• 🔄 Create scripts (e.g., “Cinema”)
• 📱 Use a widget on your smartphone for quick access.

Alternative ways of connecting (for incompatible models)

If your Xiaomi TV isn’t officially supported, take one of the workarounds:

Method 1: Through Mi Home + Yandex Alice

This method works for most models on MIUI TV 2.0+:

1. Install the Mi Home app and add the TV to it.
2. In Yandex Smart Home, click Add Device → Through other services → Mi Home.
3. Sign in with the same Mi Account as you do on your TV.
4. Select the TV from the Mi Home Devices list.

Limitation: Only basic commands (on/off, volume) will be available. Channel and application management will not work.

Method 2: Through IFTTT (for advanced users)

Service IFTTT Creates a chain of commands between Yandex Alice and Mi Home:

1. Create an account on IFTTT.
2. Connect Yandex IoT and Mi Home services.
3. Create an applet with a template: “If Alice received a command, send a signal to Mi Home.”

Example of a team IFTTT:

{


"trigger": {




"service": "yandex_iot",




"Command": "turn on the TV in the living room"




},




"action": {




"service": "mi_home",




"device": "Xiaomi TV",




"command": "power_on"




}




}

⚠️ Attention: Use IFTTT For critical scenarios (e.g., turning on the TV alarm clock), it is better to use official integration.

Setting up voice control through Alice

After connecting the TV to Yandex Smart Home, set up voice commands:

1. Open the Yandex application on your smartphone.
2. Go to the Devices. → Your TV. → Voice settings.
3. Add synonyms for the room (e.g., “living room”, “hall”) and devices (“telek”, “screen”).
4. Activate the Keyword Recognition option (e.g., “Alice, turn on Netflix on TV”).

Examples of working teams:

• 🎬 «Alice, turn on YouTube on your TV in the bedroom (youtube app will open).
• 🔊 «Alice, turn the volume on the TV 50%».
• 📺 «Alice, switch to the HDMI 1» (It only works for Mi. TV Q2/Q2Q).

For Redmi Smart models TV Only simple commands are available:

Alice, turn on the TV.


Alice, turn off the TV.




Alice, turn up the volume on the TV.

💡

To make Alice better at recognizing commands, add a TV to Favorites in the Yandex Smart Home app, which will speed up the response of the voice assistant by 20-30%.

Creating automation scenarios with a TV

Integration with Yandex Smart Home allows you to automate routine activities. Here are some useful scenarios:

Scenario 1: "Movie Night"

One press or voice command includes:

• 📺 Xiaomi TV (includes on the desired HDMI-entrance).
• 🎥 Projector or sound bar (if connected).
• 💡 Smart light (Yeelight or Xiaomi Mi) LED) muffled to 30%.
• 🔇 Smart sockets turn off unnecessary appliances (for example, kitchens).

Scenario 2: "Morning Rise"

On the alarm or motion sensor:

• 📺 The TV is turned on to a news channel or YouTube with a morning playlist.
• ☕ Redmond Coffee Maker Starts Making Coffee.
• 🌡️ Xiaomi Mi Air Conditioner sets temperature 22°C.

To create a script:

1. In the application Yandex Smart Home go to the scripts → Create a script.
2. Select a trigger (time, voice command, sensor).
3. Add actions for the TV and other devices.
4. Save and test the script.

⚠️ Note: Xiaomi TV scripts may not work if it is switched to Energy Saving mode. Turn off this option in the settings: Settings → Power supply → Energy saving regime → Off.

💡

For scripts to work, the TV must be constantly connected to the Internet. Use a backup channel (for example, a Powerline adapter) if the Wi-Fi is unstable.

Troubleshooting: TV doesn't connect or respond to commands

If the integration failed, check the following points:

Problem 1: The TV is not displayed in the list of devices

Decisions:

• 🔄 Restart the TV and router.
• 📶 Check that the TV and smartphone are connected to the same Wi-Fi network (not the guest one!).
• 🔧 In the settings of the TV, activate the settings → Smart home. → Yandex IoT → Allow connection.
• 📱 Update the Yandex Smart Home app to the latest version.

Problem 2: Alice doesn't follow voice commands

Possible causes and solutions:

• 🎤 Check the microphone of the Yandex column (test another command, for example, “Alice, what day is today?»).
• 🔊 Make sure that the TV settings are enabled with Voice Assistant. → Yandex Alice.
• 🌐 Check your Internet connection: TV must have access to servers iot.yandex.ru.
• 🔄 Re-connect the TV in the app (remove and add again).

Problem 3: Scenarios are delayed

To speed up implementation:

• 📶 Connect the TV to the router via cable (if there is an Ethernet port).
• 🔄 Turn off the energy saving mode on the TV.
• 🌍 Use it. DNS Yandex (77.88.8.8) in the settings of the TV network.

If nothing helps, contact Yandex support via the application (profile) → Assistance → Write in support) with error logs:

• Model TV.
• The firmware version (Settings → About TV).
• Text of error (if any).

FAQ: Frequent questions about Xiaomi connection TV Yandex Smart Home