Voice control of the TV through Yandex Station makes watching movies and TV shows into a convenient process - just say a command to turn on your favorite channel, change the volume or start Netflix. But not all users know that Xiaomi TVs (Mi series) TV, Redmi TV, Xiaomi TV A Pro) supports integration with Yandex speakers not only over the air, but also through wired interfaces. In this article, we will analyze all the current ways of connecting, from simple pairing over Bluetooth to setting up. HDMI ARC synchronize.
It's important to understand that the functionality depends on your TV model and firmware version. TV 4S (2020) requires updating to MIUI TV 3.0+, You can use Wi-Fi Direct to work with Yandex Station. TV X supports voice commands out of the box, but only if the speaker and TV are connected to the same network. We tested all methods on current models (2022-2026) and collected checklists for each scenario.
If you’ve tried to connect and you’ve encountered errors like “Device not found” or “failed to sync,” there’s a solution section in the article, and we’ll also reveal the hidden Smart Home Mode feature in Xiaomi firmware, which allows you to control your TV through Yandex even without a direct connection — this method works on 80% of models, but is not officially documented.
1.Preparation: What to check before connecting
Before you start setting up, make sure your devices meet the minimum requirements, which will save time and eliminate common errors.
Requirements for Xiaomi TV:
- 📺 Model: Mi TV 4/4S/4A, Redmi TV, Xiaomi TV A Pro (2019 Older versions (e.g. Mi) TV 3) They don’t support integration.
- 🔄 Firmware: MIUI TV 2.5 or higher. You can check the version in Settings → On TV.
- 📶 Internet connection: TV and Yandex Station must be on the same Wi-Fi network (2.4 GHz or 5 GHz).
- 🔊 Entrance/exit: for HDMI ARC needleport HDMI (ARC) (usually signed on the back panel).
Requirements for Yandex Station:
- 🎤 Model: Yandex Mini Station, Light, Max, Yandex Module (any year of release).
- 🔄 Firmware: the latest version of the software (update through the Yandex app on your smartphone).
- 📱 Appendix: Install Yandex (Android/iOS) customize.
⚠️ Note: If your Xiaomi TV is released before 2019, check Google Cast support in settings (Settings) → Connections → Wireless displays. Without this function, connection to Yandex Station is impossible.
For convenience, we have collected the data on compatibility in the table:
| Model TV set | Bluetooth support | Wi-Fi Direct | HDMI ARC | Voice control |
|---|---|---|---|---|
| Mi TV 4S (2020–2023) | ✅ Yes. | ✅ Yes. | ✅ Yes. | ✅ Through Yandex/Alice |
| Redmi Smart TV X (2021–2026) | ✅ Yes. | ❌ No. | ✅ Yes. | ✅ Only Yandex. |
| Xiaomi TV A Pro (2022–2026) | ✅ Yes. | ✅ Yes. | ✅ Yes. | ✅ Yandex + Alice. |
| Mi TV 5 Pro | ✅ Yes. | ✅ Yes. | ✅ Yes. | ✅ All assistants. |
Method 1: Connecting via Bluetooth (simple method)
This is the most versatile way, which works on 90% of Xiaomi models and does not require additional cables, suitable for voice control and transmitting sound from TV to speaker.
Step-by-step:
- Turn on Yandex Station and say, "Put Bluetooth on." Or press the button on the case (if any).
- On Xiaomi TV, open Settings → Connections → Bluetooth.
- Select "Add device" and wait until your Yandex Station appears in the list (the name will be of the type YandexStation-XXXX).
- Confirm the pairing on both devices.
Bluetooth enabled on Yandex Stations|
Television and column within a radius of 5 meters|
On the TV selected "Add device"|
Confirmed pairing on both devices-->
⚠️ If the TV does not find Yandex Station, try it: 🔄 Reboot both devices. 📱 Update the TV firmware through Settings → On TV. → Update of the PO. 🔊 Disable other Bluetooth devices (earphones, keyboards) that may interfere.
After successful connection, you will be able to:
- 🎵 Transmit sound from the TV to Yandex Station (for example, for better bass).
- 🎤 Control the TV with voice through the column (commands such as "Turn on Netflix" or "Grow Volume").
💡
If the sound is delayed, in the settings of the TV (Settings) → Sound. → Audio delay) set 0 ms or Auto.
Method 2: Wi-Fi connection (for voice control)
This method allows you to control the Xiaomi TV voice through Yandex Station without direct connection via Bluetooth.
How to set up:
- Make sure that the TV and Yandex Station are connected to the same Wi-Fi network.
- Open on the TV settings → Accounts and security → Smart home.
- Select "Add device" → "Yandex and log in via Yandex account (the same as on the Station).
- In the Yandex app on your smartphone, go to the Devices section and check that the TV is displayed in the list.
Which teams are supported:
- 📺 "Turn on the TV. Turn off the TV".
- 🔊 "Turn up the volume by 20%" or "Switch off the sound".
- 🎬 "Open YouTube / Launch Movie Search".
- 🔍 "Find comedies on the Movie Search".
List of all supported voice commands
⚠️ Note: If the TV is not displayed in the Yandex app, check it out: 🌐 Are both devices connected to the same network (not guest Wi-Fi). 🔄 Updated TV firmware (minimum version — MIUI TV 3.0). 📱 The settings of the TV include the option “Smart home” (Settings) → Accounts → Smart home).
4. Method 3: Connecting through HDMI ARC (high-quality)
If you care about sound quality (for example, for a home theater), use it. HDMI ARC (This method transmits audio from the TV to Yandex Station without loss, but requires a cable and a compatible port.
What you need:
- 📺 Xiaomi TV with port HDMI (ARC) (It's usually a connector. HDMI 1 HDMI 2).
- 🔊 Yandex Station Max or Module with entrance HDMI ARC (Mini and Light don't have it!).
- 🔌 Cable HDMI 2.0 or 2.1 (length up to 3 meters for minimum losses).
Step-by-step:
- Connect one end of the cable. HDMI port HDMI (ARC) on the TV, the other to Yandex Station.
- On the TV, go to Settings. → Sound. → Sound output and select "HDMI ARC".
- In the settings of Yandex Stations (via the application) activate the mode "TV Soundbar".
- Do a sound test: say "Put the music on" - the sound must go through the speaker.
Challenges and solutions:
- 🔇 No sound: check what's on the TV in Settings → Sound. → Digital output selected PCM (auto).
- 🔄 The sound is interrupted: replace HDMI-Cable certified (e.g. Belkin UltraHD).
- 📺 TV doesn't see Station: Reboot both devices and reconnect.
💡
HDMI ARC — The only way to transmit sound is to dolby digital or DTS from Xiaomi TV to Yandex Station. Other methods (Bluetooth, Wi-Fi) compress audio.
5. Method 4: Hidden "Smart Home Mode" (unofficial method)
This method works on firmware. MIUI TV 3.0+, It's not officially documented, and it allows you to control your TV through Yandex Station even without a direct connection, using a cloud bridge.
How to activate:
- On the TV remote, press sequentially: Menu → Settings → All settings → General.
- Scroll down and click 5 times on the "About TV" item (the hidden developer menu will open).
- Enable the option “Smart Home Mode (Beta)”.
- Restart the TV and reconnect to Yandex account in Settings → Accounts.
What this regime does:
- 🎤 Voice control via Yandex Station without Bluetooth.
- 🔄 Synchronizing state (for example, the station will know if the TV is on or not).
- 📱 The ability to create scripts in the Yandex application (for example, "If the TV is turned on, turn off the lights").
⚠️ Note: Including a hidden mode can lead to: 🔄 Unstable performance of some applications (e.g. Disney)+ okko). 📱 Lost warranty if the TV is on service (official Xiaomi centers reset the firmware during repairs). If after activation the TV began to brake, return the settings to the factory (Settings) → On TV. → Reset).
6. Solving common errors
Even when you set it up properly, users are facing problems, and we've collected the most common errors and ways to fix them.
Error 1: “Device not found” when connecting via Bluetooth
- 🔄 Solution: Turn off Bluetooth on your TV and turn on Bluetooth again. If it doesn't work, reset your network settings (Settings) → Network → Resetting the network).
- 📱 Alternative: Connect the station to the TV via Wi-Fi Direct (if the model supports the TV).
Error 2: The sound is delayed (lag)
- 🎵 For Bluetooth: in the settings of the TV (Settings) → Sound. → Audio delay) set "Manual" and select the value of 100-150 ms.
- 📺 For HDMI ARC: switch the cable HDMI 2.1 and turn on the "Game" mode on the TV.
Mistake 3: Yandex Station does not control the TV voice
- 🔊 Check: in the Yandex app, open the Devices section and make sure that the TV is tied to the same room as the Station.
- 🔄 Update: TV firmware to the latest version (instructions in section 1).
Error 4: When connecting by HDMI ARC no sound
- 🔌 Check the cable: HDMI should be maintained ARC (labelling on the package "ARC" or").
- 📺 TV settings: C Settings → Sound. → Select the sound output "HDMI ARC", not "Internal dynamics".
Error 5: The TV itself disconnects from Yandex Station
- ⚡ Power problem: connect the station to the socket (do not use it) USB-power-port).
- 📶 Weak Wi-Fi signal: Move router closer or use network repeater.
7. Comparison of methods of connection: which one to choose?
Each method has its pros and cons, and we've put together a comparison table to make it easier for you to choose.
| Method | Pluses | Cons | Who's right for? |
|---|---|---|---|
| Bluetooth | ✅ Easy setup✅ It works on all models. | ❌ Sound delay❌ Limited audio quality | For basic voice control and sound transmission |
| Wi-Fi (cloud) | ✅ No sound delay.✅ Works from a distance | ❌ It requires a stable internet.❌ Not all teams are supported. | For voice control without cables |
| HDMI ARC | ✅ Best sound quality✅ No delay. | ❌ We need compatible devices.❌ Cable required | For the home theater |
| Smart home mode | ✅ Extended scenarios✅ It works without direct connection. | ❌ Informal method❌ It can cause instability. | For advanced users |
Selection recommendations:
- 🎮 For games: use HDMI ARC (minimum delay).
- 🎬 For movies: HDMI ARC Bluetooth (unless the sound quality is critical).
- 🏠 For a smart home: combine Wi-Fi and Smart Home Mode.