Voice control of the robot vacuum cleaner Xiaomi through Alice saves time and makes cleaning as comfortable as possible. However, many users face difficulties in the first setup: the Mi Home application does not see the device, Yandex Smart Home refuses to sync, then commands are executed with a delay. In this article, the current for 2026 step-by-step instructions taking into account the latest updates of firmware and services, as well as analyzing typical errors that are not described in the official manuals.
We'll look at two main ways to connect: through Mi Home (for models with Mi Home Automation support) and through Xiaomi Home (for new devices on the Mijia platform), focusing on setting access rights, selecting the region in the account and the subtleties of working with multi-level Alice commands. If your vacuum cleaner does not respond to voice requests even after synchronization, there is a section at the end of the article with the diagnosis of problems.
What Xiaomi Robot Vacuum Models Support Alice
Not all Xiaomi devices are compatible with voice assistant, here is the official list of models that can be connected to Yandex Alice via Mi Home or Xiaomi Home:
- 🤖 Xiaomi Mi Robot Vacuum-Mop 2 Pro (2022–2026)
- 🤖 Xiaomi Mi Robot Vacuum-Mop P (including self-cleaning version)
- 🤖 Xiaomi Mi Robot Vacuum-Mop 2 Lite
- 🤖 Xiaomi Mi Robot Vacuum-Mop 2 Ultra (with automatic cleaning base)
- 🤖 Xiaomi Mi Robot Vacuum-Mop E10 (budgetary model)
- 🤖 Xiaomi Mi Robot Vacuum-Mop 2S (laser-navigator)
Models older than 2020 (e.g., Xiaomi Mi Robot Vacuum 1S or Mi Robot Vacuum-Mop Essential) may not support integration with Alice due to outdated firmware.
If your model is on the list but the connection fails, the problem may lie in the region of the Mi Account. For example, devices purchased in China are often tied to Mainland China servers and do not appear in the Russian version of Mi Home.
Preparation before connection: what to do in advance
To avoid synchronization errors, follow the following steps:
- Update your vacuum cleaner firmware to the latest version via Mi Home.Outdated versions often don't support integration with Alice.
- Make sure the vacuum cleaner is connected to 2.4GHz Wi-Fi. Xiaomi does not work with 5GHz networks.
- Create an account in Mi Home (if not already) and tie the vacuum cleaner to it.
Update vacuum cleaner firmware|Connect the vacuum cleaner to 2.4 GHz Wi-Fi|Create an account in Mi Home|Tie the vacuum cleaner to your account|Install the Yandex application-->
Pay special attention to the region of the Mi Account. If you bought a vacuum cleaner in China or on AliExpress, the default region may be Mainland China.
- Open Mi Home → Profile → Settings → Country / Region.
⚠️ Warning: If you change region, all device data (cleaning maps, schedules) will reset. Take screenshots of settings in advance or export maps if your model supports it.
Method 1: Connect via Mi Home (for most models)
This method works for vacuum cleaners that support Mi Home Automation, and the instructions are relevant for Mi Home versions 6.0 and later.
- Open Mi Home and go to Smart Home → Automation.
- Click Add Automation → If... and select Voice Assistant.
- In the list of services, find Yandex Alice and log in through your Yandex ID account.
If the vacuum cleaner is not displayed in Yandex Smart Home after synchronization:
- 🔄 Restart both apps (Mi Home and Yandex).
- 📶 Check that the phone and vacuum cleaner are connected to the same Wi-Fi network.
- 🔧 In Mi Home go to the vacuum cleaner settings → General. → Permits and enable Third Party Services Management.
💡
If Alice sees a vacuum cleaner after synchronization, but doesn’t follow the commands, try disconnecting it from the Mi Home and reconnecting it. Sometimes resetting the Wi-Fi network on the vacuum cleaner itself helps (press the power button for 10 seconds).
Method 2: Connect via Xiaomi Home (for new models)
Xiaomi's new vacuum cleaners (like Mi Robot Vacuum-Mop 2 Ultra) use the Xiaomi Home app instead of the Mi Home.The process of integrating with Alice here is a little different:
- Open Xiaomi Home and go to Profile → Settings → Smart Home → Voice assistants.
- Select Yandex Alice and log in.
If the device does not appear:
- 🔌 Make sure that Xiaomi Home has Cloud Sync enabled (in your account settings).
- 🌐 Check if your account is in Russia or Europe.
- 📱 Try to log out of your Xiaomi Home account and log in again.
⚠️ Note: Some models (e.g. Xiaomi Mi Robot Vacuum-Mop) E10) require additional confirmation of rights in Yandex Smart Home. After synchronization, open the device card in Yandex and click Confirm Access.
Setting up voice commands for vacuum cleaner
Once you've successfully connected, you can control the vacuum cleaner with your voice, and here are the basic commands that Alice understands:
| Team team. | Action. | Example |
|---|---|---|
| Turn the cleaning on/off | Starting or stopping the current cleaning | "Alice, turn on the vacuum cleaner in the living room." |
| Start cleaning up [room] | Cleaning in the specified area (if the rooms are set up) | "Alice, vacuum the kitchen." |
| Back to base. | The vacuum cleaner is back at the docking station | "Alice, tell the vacuum cleaner to come home." |
| Set power [level] | Change in suction force (if supported) | "Alice, give the vacuum cleaner maximum power." |
| Start wet cleaning | Activation of the floor washing mode (for models with a mop) | "Alice, turn on the floor washing in the hallway." |
For the work of teams indicating the rooms ("vacuum in the kitchen"), you need:
- In Mi Home or Xiaomi Home, create a map of the house and divide it into zones.
- Assign each zone a name (for example, "Kitchen", "Living room").
- Synchronize changes with Yandex Smart Home (can take up to 10 minutes).
How to add your own teams to Alice?
Typical errors and their solutions
If the vacuum cleaner does not respond to Alice’s commands or does not appear in Yandex Smart Home, check the following points:
- 🚫 Error: "Device not responding" Solution: Reboot the vacuum cleaner (press the power button for 10 seconds) and check the Wi-Fi connection. If the network indicator flashes red, reconnect the device to the router.
- 🌍 Error: "The device is not supported in your region" Solution: Change your account region Mi/Xiaomi Home to Russia or Europe (instructions above).
- 🔒 Error: "No access to the device" Solution: In Mi Home, go to vacuum cleaner settings → General. → Permits and enable Third Party Services Management.
- ⏳ Error: "Team is running late" Solution: Check Internet speed (vacuum cleaner needs a stable connection). If the router is far away, use a Wi-Fi replicator.
If the problem is not solved, try a full vacuum cleaner reset:
- Press the power and home buttons for 15 seconds.
- After reset, reconnect the device via Mi Home.
- Synchronize with Yandex Smart Home again.
1.The map of the house is correctly divided into zones in Mi Home.
2. The names of the rooms in Mi Home and Yandex Smart Home are the same.
3.The vacuum cleaner settings have enabled the option to Use the card for voice commands (if any).-->
Additional features: scenarios and automation
Alice can not only turn on the cleaning on command, but also automate the process with scripts.
- 🕒 Scheduled cleaning: Alice, run the vacuum every day at 10:00".
- 🚪 Cleaning when leaving the house: the scenario works when all family members leave the geozone (according to Yandex Maps).
- 📱 Cleaning up. SMS: The vacuum cleaner starts when you receive a message with a code word (for example, "Cleaning").
- 🌡️ Cleaning at high humidity: if the sensor shows humidity above 60%, Alice turns on the vacuum cleaner with a mop.
To create a script:
- Open Yandex → Smart Home → Scenarios → Create a script.
- Select the Terms (time, geolocation, weather, etc.).
- Add Action → select a vacuum cleaner and adjust the cleaning options.
- Save the script and give it a name.
For advanced users, integration with IFTTT or Home Assistant is available, but this requires additional customization and knowledge of the Xiaomi API.