Connecting Xiaomi robot vacuum cleaner with wet cleaning: from unpacking to the first cleaning

Xiaomi’s wet cleaning robots have become indispensable tools in modern homes, combining the efficiency of dry cleaning with the ability to wash floors. However, many users face difficulties already at the first stage of connecting from installing a water tank correctly to synchronizing with the Mi Home app.

It is important to understand that models with wet cleaning (for example, Xiaomi Mi Robot Vacuum-Mop 2 Pro or DreameBot) W10) This requires a different approach than traditional vacuum cleaners, and it's not just about connecting to Wi-Fi, but also about cleaning accessories, calibrating humidity sensors and choosing the optimal modes. We will take the whole process Step-by-step, from unpacking the box to starting the first general cleaning.

Preparation for the first inclusion: what should be included

Before you start setting up, check the equipment of your robot vacuum cleaner. The standard set for models with wet cleaning includes:

• 🤖 The robot vacuum cleaner itself with the main dust collector installed
• 💧 Removable water tank (usually marked) WATER TANK)
• 🧹 Nozzle for wet cleaning (microfibre or disposable wipes)
• ⚡ Charging station with power supply
• 📱 Instructions for operation (often in abbreviated form)
• 🔧 A set of spare brushes and filters (in some models)

Pay special attention to the water tank — in Xiaomi models, it often has a special valve to adjust the intensity of the water supply. 2T This valve is marked as LOW/MID/HIGH, If you don't have any of these items, you can contact the seller, it could be a marriage or a partial delivery.

Also prepare in advance:

• 📶 Stable Wi-Fi connection (robot does not support) 5G network)
• 🔌 Outlet near the docking station installation (the cable is usually short – 1.5 m)
• 📱 Smartphone with Mi Home app installed (version no lower than 6.0)
• 🧼 Clean water (distilled for first launches)

Installation of the docking station and first activation

Proper placement of the charging station is the key to the efficient operation of the robot.

⚠️ Warning: Do not install the dock in narrow passages (less than 1 m) or near the stairs. The robot may miscalculate the return trajectory, leading to a fall or get stuck.

• 📏 Distance from walls: at least 0.5 m on each side and 1.5 m in front
• 🚪 Avoid areas with heavy traffic (such as at the front door)
• ☀️ Do not place the station in direct sunlight or near heat sources.
• 🔌 The socket should be easily accessible – the robot can’t move the station

After installation of the station:

1. Connect the power supply to the socket.
2. Place the robot on the station – it should emit an audible signal and start charging (the indicator will light up in blue).
3. Wait for the full charge (usually) 4-6 watches).

3. Connection to the Mi Home application: step-by-step instructions

Synchronizing the robot with the app is the most important step. Use this manual for Xiaomi models 2023-2026 year-end:

1. Download and install Mi Home from the App Store or Google Play.
2. Sign up or sign in to your existing Xiaomi account (be sure to link your phone number!).
3. Press. + → Addition of a device → Robot vacuum cleaner.
4. Select your model from the list (if there is none, select Another and enter manually).
5. Hold the button. RESET (or POWER) robot-hull 3-5 seconds until you hear a voice message in Chinese: "" (meaning "ready to connect").
6. In the app, select your Wi-Fi network (2.4 GHz only!) and enter your password.

If the robot doesn't connect:

• 🔄 Restart the router and robot (hold the power button for 10 seconds).
• 📶 Check that the network is operating in mode. 802.11 b/g/n (not ac/ax).
• 🔒 Turn it off. VPN Proxies on the phone block the connection to Xiaomi servers.
• 📱 Update the Mi Home app to the latest version.

4.Tune the tank for wet cleaning

The water tank in Xiaomi robots has several key elements that need to be installed correctly:

For installation:

1. Remove the main dust collector (click on the latch from behind).
2. Attach the water tank before clicking (arrows on the body must match).
3. Put the microfibre nozzle in the lower compartment (it should lie flat, without folds).
4. Close the tank lid and check the tightness - when turning over, water should not leak.

💡

For the first. 3-5 cleaning use distilled water - this will prevent the formation of a plaque on the sensors and prolong the life of the pump.

Calibration and first cleaning

Before the first launch, the robot has to calibrate the sensors. 1-2 minutes and includes:

• 🧭 Checking the gyroscope (the robot spins in place).
• 👁️ Laser/optical sensor testing (to build a map).
• 💧 Check the water supply system (you will hear a short pump sound).

To start the first cleaning:

1. In the Mi Home app, select your robot.
2. Press Cleanup. → Start cleaning.
3. Select mode: Raiding only for carpets. Sweeping + washing is for hard coatings. Zone cleaning is for local cleaning.

Set up the wash intensity (if available in your model).

⚠️ Attention: In DreameBot models W10 And Mi Mop 2 Pro, when you first start a wet cleaning, the robot can drive around the same place multiple times -- that's OK. It tests the optimal water flow rate for your floor type.

6. Optimizing settings for different types of coatings

There is no universal setting for wet cleaning - the parameters depend on the floor material.

In the Mi Home app, you can create separate maps of rooms with different settings, such as:

• 🏠 Kitchen: High water level and double washing.
• 🛋️ For the living room: only sweeping (if there are carpets).
• 🚿 For the bathroom: intensive washing with disinfectant.

💡

Save separate maps for each type of coverage – this will save time to reconfigure before each cleaning.

7.Typical errors and their solution

Even after setting it up properly, users often face problems, and here are the most common ones and ways to fix them:

• 🚫 Robot does not wash the floor: Make sure the water tank is installed correctly (should be clicked). Make sure the microfiber nozzle is not dry (wash it under warm water). 2T Make sure the water supply valve is not blocked (it should move freely).
• 💦 Water leaks: Remove the tank and check the sealing ring for damage. Don't overflow the tank - the maximum level is marked on the wall of the tank. After cleaning, always drain the remaining water and dry the tank.
• 📡 Loss of connection with the application: Restart the router and robot (hold the power button for 10 seconds). Check that the router settings have turned off "Energy Saving Mode" for Wi-Fi. Update the robot firmware through Settings → Update of the PO.

Critical error: If the robot starts to emit a continuous beep and flashes red, this indicates a blockage of the humidity sensor. Immediately remove the water tank and dry the contacts of the sensor with a hair dryer (cold air) for a period of time. 5-7 minute.

8. Maintenance and extension of service life

To make a wet cleaning robot last longer, follow these recommendations:

• 🧼 Clean after each cleaning: Wash the water tank and microfibre nozzle. Clean the main dust collector and filter HEPA (You can wash them underwater once a month, wipe the sensors (laser and optical) with a dry wipe.
• 🔧 Monthly TR: Check the wear of the main brush (replace if the bristles are 50 percent worn off) Lubricate the side wheels with silicone lubrication (1 drop on the axle). Update the firmware through the Mi Home app.
• 🚫 What not to do: Use aggressive detergents (chlorine, acetone) and pour hot water into the tank (maximum 40)°C. Leave the robot on charge for more than 24 hours (this reduces battery life).

Average life of Xiaomi robot vacuum cleaners with wet cleaning — 3-5 But the battery may need to be replaced after a few years. 2 (Signs: Reduced working hours to 30-40 Original batteries for popular models are priced 2000-3500 RUB and are replaced by themselves for 10 minute.

FAQ: Answers to Frequent Questions