Modern appliances require a competent initial setup for full operation. Robot vacuum cleaners Xiaomi Mijia LDS series are equipped with a laser rangefinder, which allows them to build accurate maps of the room, but to activate this feature requires pairing with a smartphone.
Synchronizing your device with your mobile gadget gives you access to advanced functionality that you can't use just the buttons on your case, so you can set a schedule, create virtual walls, and track your cleaning statistics in real time.
In this guide, we will look at all the nuances of connection, possible errors and how to fix them, and following the algorithm of actions will avoid common problems with the network and account.
Preparation of the device and the workplace
Before you start setting up, make sure that the robot vacuum cleaner is fully charged, and then you put it on the base and connect the dock to the power grid, and the light should be on, signaling readiness.
Place the base on a flat surface against the wall, providing free passage of 1.5 meters on each side and 2 meters in front.The LDS laser module requires free rotation to scan the space, so there should be no hanging wires or obstacles around the device.
Remove all transporting locks, if any, and make sure the side brush is installed correctly.Check the dust container - it should be empty and tightly closed until clicked.
- 🔋 Make sure that the battery is at least 20%.
- 📡 The base should be in the zone of confident reception of Wi-Fi router.
- 🧹 Remove the protective film from the charging contacts on the bottom of the robot.
⚠️ Note: Do not place the charging station on the fuzzy carpets or near the mirrors, as this can knock the calibration of the laser navigator at start.
Installation and configuration of the Mi Home application
To manage the Xiaomi ecosystem, you will need the official Mi Home app. Download it from the Google Play Store or Apple App Store, paying attention to the developer - it must be Beijing Xiaomi Technology Co., Ltd.
Once installed, launch the app and create an account or log in to an existing one. It is critical to choose the right region in your profile settings, as it depends on the list of available devices and the server through which you will manage.
If you bought a global version of the vacuum cleaner, choose your country of residence. Devices designed for the Chinese market may require a choice of "China" region, but most modern Mijia models run on global servers.
Allow the app to access geolocation and Bluetooth, which is necessary to automatically search for devices nearby, and without these permissions, the process of finding a gadget can take much longer or not be successful.
The process of pairing a robot with a smartphone
Turn on the robot vacuum cleaner by holding the power button on the top panel until the voice greeting appears. simultaneously press and hold two buttons (usually Home and Turn on/Off) for 5-7 seconds until you hear the message about the transition to pairing mode.
Open the Mi Home app and tap on the plus in the top right corner.The system will automatically start scanning the space, and your vacuum cleaner should appear in the list of available devices.
☑️ Checking before connection
Click on the device icon and follow the instructions on the screen. You will be prompted to select a Wi-Fi network and enter a password. Note that Xiaomi robots only support 2.4 GHz, 5 GHz networks are not displayed in the list.
⚠️ Note: If your router broadcasts 2.4 and 5 GHz networks under the same name, temporarily split them in the router settings or turn off 5 GHz while you set up.
Solving problems with connecting to Wi-Fi
The most common cause of a connection error is frequency band incompatibility. Routers often combine two bands into a single network, causing confusion among smart devices.
Check your router settings and make sure that the 2.4GHz network has WPA2-PSK security protocol installed. Outdated encryption protocols or corporate networks with login and password authorization can block Mijia gadgets from connecting.
Also worth noting is the length of the password and the characters used, and some robot models may not properly handle special characters or spaces in the Wi-Fi password.
What to do if the search for the device freezes?
In case of persistent error (constant reset of connection), try to assign statically IP-address for the device in the router settings or temporarily disable the mac filter.
Comparison of models and compatibility of functions
The range of laser-navigated robots is extensive, and the functionality of the applications may vary slightly depending on the model, with the main differences being the suction power and the type of wet cleaning.
Below is a table that helps identify the capabilities of the popular LDS series models available in the market.
| Model | Suction power | Wet cleaning | Mapping |
|---|---|---|---|
| Xiaomi Mijia 1S | 2000 Pa Pa | There (passive) | Yes (LDS) |
| Xiaomi Vacuum Mop 2 | 2700 Pa | Got it (vibro board) | Yes (LDS) |
| Xiaomi Robot Vacuum X10+ | 4000 Pa | Got it (rotational) | Yes (LDS + AI) |
| Roborock S5 Max | 2000 Pa Pa | Aye (electronic) | Yes (LDS) |
Understanding your model allows you to better customize cleaning scenarios, such as automatic power enhancement for carpets and water flow control for hard floors.
💡
The wet cleaning function in the application is activated only if the robot has a water module and removed a dry dust container (in some models).
Mapping and zoning of space
Once the robot is successfully connected, it must test the mapping process, while staying out of the device and moving the base, otherwise the map may not be built correctly or split into multiple parts.
In the app, go to map editing mode, where you can rename rooms, install virtual walls and no-go zones, and this is especially true for protecting animal bowls or wired areas.
Use the room-sharing function if the robot has combined the living room and kitchen into one room, and accurate markings allow you to only clean specific rooms on a voice command or schedule.
- 🚫 Virtual walls are invisible to a robot, but are strictly adhered to by the algorithm.
- 🔄 The map can be saved in the cloud, which allows you to restore it after resetting.
- 🏠 For multi-storey houses, storage of up to 4 cards is supported (depending on the model).
⚠️ Note: When moving the base to a new location, the old map must be removed and a new one created, since the map binding is tightly linked to the coordinates of the base.