Connecting the Xiaomi vacuum cleaner to Mi Home on Android: video + step-by-step instructions

Xiaomi’s robot vacuum cleaners have long been an integral part of smart homes, but their first connection to the Mi Home app is often a question for users. Especially when it comes to synchronizing through an Android smartphone, there may be errors with device recognition, Wi-Fi problems or incompatible firmware versions. In this article, we will analyze the step-by-step process of connecting with all the nuances, as well as provide video instructions and solutions to typical errors.

Many owners are faced with the fact that the vacuum cleaner Mi Robot Vacuum (or models of the MiJia series, Viomi, Dreame) is not detected in the application, although the indicators on the body burn correctly. The reason is often due to the wrong network setting or missed steps when adding the device. We analyzed the current versions of the Mi Home (including 6.5.400 for Android) and tested the connection on Xiaomi Mi Robot Vacuum-Mop 2 Lite, Mi Robot Vacuum-Mop P and Dreame D9 models – all the instructions are universal for most of the brand’s vacuum cleaners.

If you're looking for a visual demonstration, we've attached a live video at the end of this article in Russian (2026), which shows you the process from unpacking to the first run, and now we're going to go to the detailed text instructions.

1. Preparation before connection: what to check

Before you start syncing, make sure that all conditions are met. 90% of connection errors are due to missed details at this stage.

First, check the compatibility of the vacuum cleaner model with your region in Mi Home.The fact is that Xiaomi produces devices for different markets (China, Europe, Russia), and if you bought a vacuum cleaner, for example, on AliExpress without being tied to a local server, there may be problems.

• 🌍 Global Version - for the international market (supports Russian in the app: STYJ02YM, SDJQR02RR.
• 🇨🇳 China Version - China only (region change in Mi Home required: STYTJ01ZHM, SDJQR01RR.

Second, prepare your network environment:

• 📶 Wi-Fi router should operate at 2.4 GHz (Xiaomi vacuum cleaners do not support 5 GHz).If you have a dual-band network, split it or turn off 5 GHz temporarily.
• 🔒 Wi-Fi passwords must not contain Cyrillic, spaces or special characters (only Latin, numerals, hyphen are allowed).
• 📱 Android-smartphone with OS version not lower than Android 8.0 and free space for installation of Mi Home (app weighs) ~100MB).

⚠️ Warning: If your vacuum cleaner was previously linked to another Mi Account, you must reset it to factory settings. To do this, hold the Home and Power buttons simultaneously for 10 seconds until the voice alert sounds.

2. Installation and configuration of the Mi Home app

The official Mi Home app is the only legitimate way to control Xiaomi’s vacuum cleaner, download it only from trusted sources:

• 🤖 Google Play – link to the official page.
• 🌐 Xiaomi official website – if Play Market is not available in your area.

Don't use it. APK-files from third-party sites – they may contain malicious code or outdated versions that do not support new models of vacuum cleaners.

After installation, follow the following steps:

1. Open Mi Home and select region: For Global Version vacuum cleaner: Russia or Europe. For China Version: China (you will need to change the language to English in the application settings).

Mi Account

Use the same account to which you plan to tie the vacuum cleaner - later it will be impossible to change it without resetting the device.

geodata

camera

storehouse

If you are logging in to an error that says “I couldn’t connect to the server,” try changing the region to Singapore or India, which is often more stable for users from Russia.

3. Step-by-step instructions: how to add a vacuum cleaner to Mi Home

Now, to the process of connecting, follow the instructions in strict order, and skipping the steps will lead to errors.

Step 1. Activation of the vacuum cleaner

• 🔋 Connect the vacuum cleaner to the charging base and make sure the power indicator is lit blue (charged) or orange (charged).
• 🎤 Press and hold the Power button (or Home, depending on the model) for 3-5 seconds until you hear a voice message in Chinese or English: Waiting for connection).

Step 2: Adding the device to Mi Home

1. In the application, click + → Add the device.
2. Select the category of vacuum cleaners (or enter the model name manually in search).
3. Confirm that the indicator on the vacuum cleaner flashes orange-white (pairing mode).
4. Connect to the temporary Wi-Fi network that the vacuum cleaner creates (the name will begin with the first one). mirobot_ or rockrobo_).
5. Return to Mi Home and select your 2.4GHz home network, enter your password.

Step 3: Completion of the setup

• 📱 Wait for the message "Device added" in the application.
• 🗺️ Take a short management training tour (you can skip it).
• 🔄 Update the vacuum cleaner firmware if the app offers - this will fix possible bugs.

If at the stage of connecting to Wi-Fi there is an error "I failed to connect to the network", check:

• Is the router’s client isolation mode turned off?
• Does the antivirus or firewall block the connection (temporary disable them).
• Is there a VPN on your smartphone (turn it off)?

4. Solving common connection errors

Even with the correct following of the instructions, there can be failures. We have collected the TOP-5 errors and ways to fix them:

If none of these methods worked, try an alternative method of connecting via AP mode (not available on all models):

1. Hold the Power + Home button for 5 seconds until the white indicator flashes.
2. In Mi Home, select Add Manual → Robot Vacuum → AP Mode.
3. Connect to the vacuum cleaner network (mirobot_XXXX) and follow the instructions in the appendix.

5. Customization of the vacuum cleaner after connection

After successful synchronization, you have to adjust the vacuum cleaner to your needs.

Map of the premises

• 🗺️ Run the first cleaning in Full mode - the vacuum cleaner will make a map of the apartment.
• 📏 In the app, divide the map into zones (Rooms) and assign names (e.g., Kitchen, Corridor).
• 🚫 Add no-go zones (where the vacuum cleaner should not come) via the card settings.

2. Cleaning schedule

• ⏰ Set up automatic cleaning on schedule in the Planner.
• 🔄 Choose the days of the week, time and type of cleaning (such as Quiet at night).

Voice control

• 🎤 Connect the vacuum cleaner to Alice (Yandex) or Google Assistant via Settings → Voice assistants.
• 🗣️ Examples of commands: "Alice, run the vacuum cleaner in the kitchen" or "OK Google, put the vacuum cleaner back on base".

💡

If the vacuum cleaner doesn't build a map well (running on walls, skipping sections), clean the sensors under the front bumper with a cotton swab dipped in alcohol.

Video Instructions: Connection in Practice

For clarity, we have selected up-to-date videos with a step-by-step connection in Russian. Note the year of publication - instructions older than 2022 may contain outdated data.

Video 1: Connecting Mi Robot Vacuum-Mop 2 Lite (2026)

• 🎥 Link to YouTube (Smart Home with Xiaomi channel").
• ✅ Shown process from scratch: unpacking, installation of Mi Home, binding to Wi-Fi.

Video 2: Connection Error Solution (China Version)

• 🎥 Link to YouTube (Xiaomi Life Channel").
• ✅ Explains how to change the region to China and tie the vacuum cleaner without errors.

Video 3: Set up the map and schedule after connecting

• 🎥 Link to YouTube (channel "TechnoBlog").
• ✅ Detailed analysis of the Mi Home interface for cleaning management.

⚠️ Note: If the video uses older versions of Mi Home (up to 6.0), the interface may be different. Current version at 2026 is 6.5.400 and up. Update the app before viewing!

7. Alternative methods of vacuum cleaner control

Besides Mi Home, there are additional methods of vacuum control that will come in handy if the main application is unstable.

1.The Mi Home Lite app

• 📱 Lightweight version of Mi Home for weak smartphones.
• 🔗 Download it to Google Play.

2.Smart speakers with Alice/Google Assistant

• 🎤 Commands for Yandex Stations: "Alice, turn on the vacuum cleaner", "Alice, how much charge the vacuum cleaner has?".
• 🔊 Google: Hey Google, start vacuuming in the living room".

Stool (side of annex)

• 🛠️ Valetudo or DustBuilder – Open Alternatives for Advanced Users.
• ⚠️ Require Root-Laws on the Vacuum and Technical Knowledge.

💡

If the vacuum cleaner doesn’t respond to commands from the Mi Home, check the internet connection on your smartphone first. Often the problem lies in the lack of access to Xiaomi servers, not in the device itself.

FAQ: Frequent questions about connectivity