How to connect a vacuum cleaner Xiaomi G1 Android phone: full instructions with pictures and tips

Xiaomi Mi Robot Vacuum-Mop G1 (Or just Xiaomi. G1) — It's a smart device that makes cleaning your home easier, but its full potential is only unlocked when you connect to your smartphone, and through the mobile app, you can manage your cleaning remotely, set your schedule, select your cleaning areas, and even monitor the condition of your accessories. However, many users are having trouble with the initial synchronization phase.This article will help you avoid typical errors and connect Xiaomi. G1 Android phone from the first time.

The connection process takes no more than 10 minutes, but it requires attention to detail, from choosing the right version of the Mi Home app to setting up the Wi-Fi network. We'll take every step from unpacking the vacuum cleaner to the first commands via your smartphone. And if something goes wrong, you'll find solutions to some of the most common problems here, including synchronization errors and a connection drop.

Note: The instructions are relevant for all Xiaomi modifications G1, including versions with wet cleaning function (G1 Mop) and updated firmware from 2023 to 2026: If your model is released earlier, some menu items may differ slightly.

1.Preparation for connection: what to check before starting

Before you start synchronizing, make sure that all the components of the system are ready to work, and failure to comply with these conditions is the main cause of failures in connection.

First, check the completeness of the vacuum cleaner. G1 must:

• 🔋 The robot vacuum cleaner with a charging station
• 📶 Power supply (adapter) 24V/1.5A)
• 📱 Instructions in Chinese (Russian version is not usually available)
• 🧹 Additional brushes and filters (depending on the configuration)

If something is missing, contact the seller - without the original power supply, the vacuum cleaner may not charge correctly.

Second, prepare an Android smartphone:

• 📱 Make sure Android is at least 6.0 (for stable Mi Home)
• 📶 Connect your phone to a 2.4GHz Wi-Fi network (vacuum cleaner does not support 5GHz!)
• 🔄 Turn it off. VPN, Proxies or adblockers – they can block Xiaomi servers
• 📲 Free up at least 200 MB of memory to install the application

And finally, check the router:

• 🔒 Wi-Fi passwords must contain only Latin characters and numbers (without Cyrillic and special characters)
• 🌐 Turn off the “Client Isolation” function in the router settings
• 🔄 Restart your router 5 minutes before connecting (this will reset possible errors) DHCP)

⚠️ Note: If your router is running 802.11n/ac/ax frequency-only 5 GHz, the vacuum cleaner won't be able to connect. 2.4 GHz in settings or use a separate access point.

2. Installation and configuration of the Mi Home app

Official application for management Xiaomi G1 — Mi Home (formerly Xiaomi Home) can be downloaded from Google Play, but there are nuances with the choice of region.

Follow the instructions:

1. Open the Mi Home page on Google Play and click "Install".
2. After installation, run the app and select the “Russia” region (or “Mainland China” if you have a global version of the vacuum cleaner).
3. Sign up with your phone number or email, and if you already have an account, log in.
4. On the main menu, click + → Adding a device and select the category "Vacilities".

If the app does not find a vacuum cleaner, try:

• 🔄 Reset Mi Home and Repeat Search
• 📱 Enable geolocation and allow the application to access the location
• 🌐 Connect to another Wi-Fi network (e.g., a mobile access point)

⚠️ Warning: Do not use pirated versions of the Mi Home from third-party sources. They may contain viruses or may not support the latest vacuum cleaner firmware.

Tip: If you already have other Xiaomi devices (such as light bulbs or sensors), adding a vacuum cleaner will go faster – the system will automatically identify it as part of the ecosystem.

💡

Update Mi Home to the latest version before connecting.Older versions of the app don't support newer models of vacuum cleaners, including Xiaomi G1.

3. Xiaomi's step-by-step connection G1 phone-in

Now, to the synchronization process itself, follow the instructions carefully, because the order of action is important.

Step 1: Preparation of the vacuum cleaner

• 🔌 Connect the charging station to the outlet and install a vacuum cleaner on it.
• 🔋 Wait until the indicator on the vacuum cleaner starts flashing orange (this means it is ready to connect).
• 🔊 Press and hold the power button on the vacuum cleaner for 3 seconds until you hear a voice message in Chinese (this is a signal to activate the pairing mode).

Step 2: Adding the device to Mi Home

Step 3: Connect to Wi-Fi

• 📶 The application will offer to connect to the temporary network of the vacuum cleaner (Xiaomi_Vacuum_XXXX). Do it.
• 🔑 Return to Mi Home and select your 2.4GHz home Wi-Fi network.
• 🔐 Enter your Wi-Fi password (Latin characters only!).
• ⏳ Wait for the connection to be completed (usually takes 1-3 minutes).

If the process is stuck in the “Network Connection” stage, try:

• 🔄 Reboot the vacuum cleaner (hold the power button for 10 seconds).
• 📱 Reinstall Mi Home and try again.
• 🌐 Temporarily disable the firewall on the router.

Vacuum is charged at base|The indicator flashes orange|Phone connected to 2.4 GHz Wi-Fi|In Mi Home selected region Russia"|Disabled. VPN and adblockers-->

4.Setting up the vacuum cleaner after connection

After successful synchronization, the vacuum cleaner will appear in the Mi Home main menu, and now it needs to be configured for comfortable operation.

Basic settings:

• 🏠 Assign a name to the vacuum cleaner (for example, "Living room vacuum cleaner") for ease of control.
• 📍 Set up a room map: start the first cleaning in the "Full Cleanup" mode so that the robot makes a plan for the apartment.
• ⏰ Set a cleaning schedule in the "Timer" section (we recommend starting with 1-2 cleanings per week).

Useful functions in the annex:

Important: After the first cleaning, check the map in the app. If the robot did not reach some areas, clear the space from obstacles (wires, high thresholds) or set up virtual walls in the Map menu.

5. Common mistakes and their solutions

Even if you follow the instructions accurately, you can get into a crash.-5 problems and ways of eliminating them:

1.Vacuum cleaner doesn't connect to Wi-Fi

• 🔌 Make sure the router is running in mode. 802.11b/g/n (not ac/ax).
• 🔒 Check that the password does not contain Cyrillic or special characters (for example, #$%).
• 📡 Try connecting to another network (e.g., mobile phone internet in access point mode).

2.The app does not find the vacuum cleaner

• 🔄 Restart the vacuum cleaner (hold the button for 10 seconds).
• 📱 Remove the Mi Home app cache in Android settings.
• 🌐 Check if the antivirus is blocking access to the network.

3.Vacuum cleaner connected but not responding to commands

• 🔄 Re-launch the Mi Home app.
• 📶 Make sure your phone and vacuum cleaner are on the same Wi-Fi network.
• 🔋 Check the battery charge of the vacuum cleaner (at a level below 20%, some functions are turned off).

Error "Cannot add device"

• 📱 Try changing the region in Mi Home to Mainland China".
• 🔄 Update the vacuum cleaner firmware through Settings → Update of the PO.
• 📡 Connect to a network without dual authentication (e.g. guest Wi-Fi).

5.The vacuum cleaner is constantly losing touch

• 📶 Move the router closer to the cleaning area.
• 🔌 Turn off the "Energy Saving" function on the router (it can break the connection).
• 🔄 Set up static. IP for vacuum cleaner in the control panel of the router.

⚠️ Warning: If the vacuum cleaner, after connecting, gives an error of "Error 10", this means a problem with the sensors. Try to clean the optical sensor (located under the front bumper) with a dry wipe.

💡

If the vacuum cleaner doesn't connect at all times, try resetting it to factory settings: hold the power button for 15 seconds until you hear a double beep. After reset, repeat the connection procedure.

6. Optimization of the vacuum cleaner through a smartphone

After a successful connection, Xiaomi can improve its work G1 via additional settings.

Advice for setting up:

• 🗺️ Break the map into rooms manually (in the menu "Map") → Edit") for precise cleaning areas.
• ⏳ Set a schedule for when you’re not home – it will reduce noise.
• 🔋 Enable the option "Return to base at low charge" (in Settings) → Battery).
• 🚫 Add virtual walls for areas where the vacuum cleaner should not go (such as children's toys).

Integration with other devices:

• 💡 Connect the vacuum cleaner to Xiaomi Home along with other gadgets (such as smart lamps) to start cleaning according to the scenario.
• 🎤 Configure control via Alice or Google Assistant (in the Voice Assistant menu").
• 📱 Use the Mi Home widget on the home screen for quick access to the main commands.

Scenario example: Set up automatic cleaning on schedule, but only if the smart motion sensor doesn't detect the presence of people in the room, you can do this under Automation.

Important: If you use a vacuum cleaner with a wet cleaning function (Xiaomi) G1 Mop, remember to drain the water from the tank after each cleaning. Stagnant water can cause unpleasant odor and breakage of the pump.

7. Firmware Update and Security

Regular firmware updates improve vacuum cleaner performance, add new features and fix bugs. Check for updates at least once a month.

How to update firmware:

1. Open Mi Home and select your vacuum cleaner.
2. Go to Settings. → Update of the PO.
3. If a new version is available, click "Update".
4. ⏳ Wait until it is completed (usually 5-10 minutes). Do not turn off the vacuum cleaner during the process!

Security measures:

• 🔒 Do not share your Mi Home account with outsiders.
• 📱 Enable two-factor authentication in Xiaomi account settings.
• 🌐 Avoid connecting the vacuum cleaner to public Wi-Fi networks (such as in cafes or hotels).

After the update, check:

• 🗺️ The map of the room is saved (sometimes a rescan is required).
• 🔧 Does all functions (voice control, zone cleaning) work).
• 📡 Stability of connection with Wi-Fi.

⚠️ Warning: If the vacuum cleaner gets worse after the upgrade (for example, it builds a map worse or loses connection), try to roll back to the previous version of the firmware.

FAQ: Frequent questions about Xiaomi G1 connectivity