Integrating the robotic assistant into a single smart home ecosystem gives owners access to advanced functionality that is not available when controlled from a button on the case. Connecting the Xiaomi Vacuum 1S to the Mi Home app allows you not only to run cleaning from anywhere in the world, but also to build detailed maps of rooms, install virtual walls and customize complex automation scenarios. Without this step, the device becomes a regular vacuum cleaner with a limited set of functions.
The pairing process may seem complicated only at first glance, but following the sequence of actions ensures successful setup in a few minutes. Xiaomi Robot Vacuum 1S uses standard communication protocols, but requires carefulness when choosing a region and setting up the network. In this guide, we will take every step, from preparing a smartphone to fine-tuning the schedule so that you can enjoy cleanliness without unnecessary hassle.
The current LDS navigation algorithms that this device uses require stable connectivity to update maps and transmit statistics correctly. The stability of the Wi-Fi signal at the base station is critical to the success of the entire system. If you ignore the network requirements, the device can periodically lose communication, which will lead to interruption of cleaning or the inability to remotely control.
Preparation for setting up: requirements and checks
Before starting the procedure, you need to make sure that all the components of the system are ready to work. First of all, check the charge of the robot vacuum cleaner itself: the battery level should be at least 20%, although it is better to put the device on the base for full charging. The base station should be installed against the wall in a place with good wireless coverage, away from sources of strong electromagnetic interference.
The second critical element is your smartphone. Make sure that the device is enabled Bluetooth and geolocation (GPS) modules, as the Mi Home app uses them to find nearby devices and determine your location to select the right server.
⚠️ Attention: Robot vacuum cleaner Xiaomi 1S It only supports 2.4GHz Wi-Fi. If your router is broadcasting 5GHz or using a single-named Dual Band mode, it may be difficult to temporarily split the networks in your router settings or switch to 2.4GHz before setting up.
Also, you should download and install the official Mi Home app (or Xiaomi Home) from the official app store. Register a Xiaomi account if you do not already have one, since without authorization, device management is impossible. The account region must correspond to the region for which the device is intended, otherwise the vacuum cleaner may simply not be determined in the list of available gadgets.
💡
If the app doesn’t see the device, try temporarily disabling mobile internet (3G/4G) on your smartphone, leaving only Wi-Fi. This often helps with initial pairing.
Installation and initial configuration of the Mi Home application
Once you install the app, launch it and log in to your account. On the home screen, click the device add button, usually denoted by the symbol «+» In the upper right corner, the system will suggest scanning. QR-code or find the device automatically. For the Xiaomi Vacuum model 1S You can use the search on the catalog by selecting the category "Vaccines" or entering the model in the search bar.
Pay special attention to selecting the region at the top of the device add screen. Setting up the region determines which server will store your maps and schedules. Choosing the wrong one will cause the device to fail to add or to function in a non-stable manner. The region is usually selected automatically based on the IP-Addresses, but can be changed manually.
- 📱 Make sure your smartphone is connected to the same Wi-Fi network you plan to connect to.
- 🔓 Allow the app to access the local network, Bluetooth and geo-position in the phone system settings.
- 🔄 Close background applications that may consume a lot of traffic or interfere with connection stability.
If the automatic search didn’t work, go to manual add-on mode. Find mirobot.vacuum.v10 in the list or select Xiaomi Robot Vacuum 1S from the options offered. The app will give detailed instructions to follow Step-by-step, without missing the confirmation steps.
The process of pairing a robot vacuum cleaner with Wi-Fi
When you select a model in the app, the pairing process will begin. The screen will request confirmation that the indicator on the device body is flashing orange. If the indicator is constantly burning or not at all, you need to put the vacuum cleaner in pairing mode. To do this, simultaneously press and hold two buttons on the top panel: the on button and the return button to the base (or the spot clean button, depending on the revision), until you hear a voice message about the start of the setup.
Next, the app will ask you to select your Wi-Fi network and enter your password. Enter data carefully, observing the character register. The connection process can take from 30 seconds to 2 minutes. During this time, do not turn off the smartphone screen and keep the device close to the router. Progress bar will show the status of the connection installation.
☑️ Checklist of successful connection
Once successfully connected, the vacuum cleaner will sound and the indicator will light up in white (or blue, depending on the software version), and the app will suggest naming the device, for example, “Living Room Vacuum” or “Kitchen”, and assigning it to a specific room for easy control, the name of the device will appear in the general list of smart home gadgets.
⚠️ Warning: If the process is stalling at 99% or “Waiting for confirmation”, try restarting the router and repeating the procedure. VPN-services, if they are active on a smartphone.
First scan and construction of a room map
Once the Xiaomi Vacuum 1S is connected, you need to build the first map of the room, which is a key step for the navigation to work properly. Run a complete cleaning through the application, removing wires, socks and other small objects from the floor that can confuse the brush. The robot will drive through the entire available area, scanning the space with a laser rangefinder.
As you build the map, you'll see in real time how the plan of the apartment is drawn on your smartphone screen. The LDS laser module provides high accuracy measurements. Don't interrupt the cleaning until it's finished, otherwise the map may not be saved correctly or split into several fragments.
When the map is ready, the app will suggest you save it, and then you can edit the room: combine the disparate zones, divide the rooms with virtual walls and set names, and then you can start cleaning only in specific rooms with a single click.
What to do if the card is “got”?
Setting up the schedule and cleaning areas
One of the biggest benefits of a smart vacuum cleaner is automation. In the settings section of the device, look for "Timer," where you can create tasks that will be done at specific times, and the flexibility of settings allows you to set different scenarios for different days of the week.