Modern peripherals from Xiaomi are famous not only for their minimalist design, but also high functionality, which often exceeds users' expectations. USB-Connecting such a device may seem a trivial task, but owners of Mijia or Portable Mouse gadgets sometimes face nuances that require a clear algorithm of actions.
The process of synchronizing equipment with a computer or smartphone depends on the operating system and the specific model of the accessory. USB-Bluetooth gadgets require a mandatory search and pairing procedure in the settings of the receiving device. Proper configuration guarantees a stable cursor response and economical battery consumption, which is critical for battery life.
In this guide, we’ll take a look at all the steps of connecting, from activating search mode to solving complex technical problems. You’ll learn about the hidden features of switching between devices and understand why your mouse may not be detected by the system the first time. A key feature of most Xiaomi mice is support for multi-device mode, allowing you to switch between three devices with the simple press of a button.
Preparation of equipment and activation of the coupling mode
Before setting up, make sure that the device has fresh batteries installed or the battery is fully charged. Insufficient power levels can cause the Bluetooth module to not turn on or to work unstablely, interrupting the connection at the most inopportune moment. Turn the mouse over and open the battery compartment, checking that the polarity setting is correct.
To enter detection mode, you need to press a special button (Pairing), which is usually located on the bottom panel next to the optical sensor or power switch. The indicator lamp located at the top of the housing or around the scroll wheel, will flash white or blue. This is a signal that the device is ready to pair.
Some models, such as the Mijia Portable Mouse, have a combined mode switch. If you plan to use a Bluetooth connection, make sure the switch is set to the appropriate position, not 2.4 GHz mode (USB-An error in the choice of mode of operation is one of the most common reasons why a computer does not see a device.
⚠️ Warning: Do not hold the pairing button too long after the indicator flashes. In some firmwares, prolonged retention (more than 10 seconds) can reset to factory settings, which will require re-binding all previously used gadgets.
☑️ Checking before connection
Instructions for Windows 10 and 11 users
Windows operating systems have built-in drivers for most of the HID-Start the Start menu and go to Settings, then select Devices category (in Windows 11 this is the Bluetooth and Devices section). Make sure the wireless interface slider is activated.
Click the Add Bluetooth or other device button and select the first item in the window that appears, "Bluetooth." The system will start the ether scan. The list of available devices should show the name of your mouse, such as Mijia Mouse or Mi Portable Mouse. Click the name to start the pairing procedure.
Once the device is successfully connected, the system will give a notification that the cursor appears on the screen but moves in jerks, try changing the distance between the mouse and the signal receiver or checking for interference from Wi-Fi routers operating in the 2.4 GHz band.
- 🖱️ Automatic installation: Windows will find and install the necessary HID-background-driver.
- 🔄 Reconnect: When you re-enable, the mouse will connect automatically if Bluetooth on the PC is active.
- ⚙️ Button settings: Basic features are available right away, but third-party software may be needed to reassign buttons.
Setup on macOS and Apple devices
MacBook and iMac owners are even more fortunate: Apple’s ecosystem is famous for its excellent compatibility with third-party peripherals. To connect, go to the menu and select System Settings (or System Settings in newer versions of macOS).
Make sure Bluetooth is on. In the list of My Devices or Available Devices, find your Xiaomi mouse. Clicking on the Connect button will start the process of creating a secure communication channel. Once completed, the device name will be next to the Connected status.
It is worth noting that horizontal wheel scrolling, typical of Mijia mice, in macOS may not work correctly or be inverted compared to Windows. To correct this and adjust the speed of the cursor, it is recommended to use the system settings of the trackpad and mouse in the Pointer section.
System settings -> Bluetooth -> Find "Mi Mouse" -> ConnectUse with Android and iOS
Mobile devices also support external manipulators, turning a smartphone or tablet into a full-fledged workstation. On Android, the process is as simple as possible: just go to Settings -> Connected devices -> Connecting a new device. Once you find a mouse, tap its name in the list.
A mouse-controlled cursor will appear on the screen of the smartphone, which is especially useful when working with tables or presentations, where the accuracy of the finger is inferior to the accuracy of the optical sensor. On iOS, the algorithm is similar: Settings -> Bluetooth -> selecting a device from the list of available devices.
It is important to note that not all applications support cursor control. While system navigation and office suites work perfectly, in some games or specific programs, the cursor may disappear or behave unpredictably.
💡
Use the “Do Not Disturb” mode on your smartphone when presenting, so that pop-up notifications do not overlap the mouse cursor and do not confuse the focus of the audience’s attention.
Working with multiple devices and switching modes
One of the main features of Xiaomi’s advanced models is the ability to connect to three devices at once. On the bottom panel of such mice there are special channel switching buttons (usually indicated by numbers 1, 2, 3 or dots), which allows you to instantly switch from working on a laptop to managing a tablet or a desktop PC.
To add a new device to an existing pair, you need to briefly press the channel selection button, and then press the pairing button before the indicator flashes, so you tie channel 1 to a PC, channel 2 to a laptop, and channel 3 to a smartphone, switching between them with a single click.
This feature is extremely useful for freelancers and office workers who have to constantly change jobs, but it is worth remembering that the active connection is held on only one channel, the rest are on standby.
| Mode of work | Indication | Action. | The device |
|---|---|---|---|
| Search (Pairing) | Fast blinking. | Clip the 3-5 sec button | Anybody |
| Connected. | Burning constantly / Not burning | Normal work | Active channel |
| Waiting. | Short-term flashing | Switching button 1-3 | Conjugated |
| Unloaded. | Red flashing | Battery replacement | Anybody |
Solving problems and troubleshooting
Even if you follow all the instructions, you can have technical difficulties. If a computer sees a device but writes "Connection Error" or "Unable to connect", try removing the mouse from the list of previously used devices ("Forget the device") and start the procedure again. Often the conflict arises from "stuck" old profiles.
In Windows Device Manager (devmgmt.msc), check the "Mice and Other Pointing Devices" section. If there's a yellow exclamation mark next to the driver name, right-click and select "Delete Device" and then select "Update Hardware Configuration" from the menu, which will force the system to reinstall the driver clean.
Problems can also be caused by the energy-saving settings of the Bluetooth adapter itself. In Device Manager, find your Bluetooth module, open properties, go to the Power Management tab, and uncheck the "Allow this device to be turned off to save energy."
⚠️ Warning: If the mouse stops responding after a long downtime, don't be in a hurry to change the batteries. 5-10 minutes without moving to get it out of deep sleep, or just press any button several times in a row.
Secret combination for resetting
💡
The stability of the wireless mouse depends on the quality of the batteries and the absence of radio interference in the 2.4 GHz range.