Xiaomi’s modern peripherals, particularly the Xiaomi Wireless Mouse 2, are famous for their minimalist design and functionality. However, the initial setup of the device may raise questions for users who have not previously encountered combined connectivity interfaces. Unlike classic wired counterparts, it requires the right mode switching and choice of pairing method for stable operation.
The activation process depends on what interface you plan to use: universal USB-Bluetooth 4.0 receiver or wireless protocol. Both methods have their advantages, but require strict adherence to the sequence of actions described by the manufacturer. In this article, we will analyze each step in detail so that your new mouse will work instantly.
Before you start software, you need to prepare the device for the first run. Ignoring basic preparation steps often causes the gadget to be undetectable by the computer or smartphone. Make sure you have all the components that come in the box on hand.
⚠️ Warning: Before first switching on, be sure to remove the protective insulation tape from the battery compartment, otherwise the device will not turn on, even if the power cells are working properly.
Preparation of the device and installation of power elements
The first step is to provide a power source for the device to work. The Xiaomi Wireless Mouse 2 is powered by two standard AA batteries, which are usually already inside the case or packaged. You need to gently open the power compartment cover located on the bottom panel of the device, and just move the lock in the direction indicated by the arrow.
Once the compartment is opened, carefully inspect the battery pack. Often manufacturers install a special plastic pad or cardboard between the contacts and the batteries to prevent discharge when stored in the warehouse. Remove this insulator if it is present. Then make sure that the polarity of the batteries is observed: plus must match the designation inside the compartment. Incorrect installation can lead to a lack of reaction of the device.
Close the lid of the compartment until you click it, and now you're looking at the bottom of the mouse, where the slider switch is located, and it has three positions: Off, mode. USB-To start, move the switch to the middle or extreme position corresponding to the chosen method of connection. The indicator on the body should flash, signaling the power supply.
- 🔋 Use only high-quality alkaline batteries to ensure long-term battery life.
- 🔌 Check the density of the compartment cover to avoid backlash during heavy use.
- 🛑 Do not mix old and new batteries or batteries of different types in the same device.
💡
If the indicator does not light up after installing the batteries, try to slightly twist them in the compartment to improve contact with the terminals, or replace them with one that is known to be serviceable.
Connection through USB-receiver
The fastest and most reliable way to activate Xiaomi Wireless Mouse 2 on a computer or laptop is to use the built-in device. USB-This method does not require the installation of additional drivers in most modern operating systems, since it works on the principle of Plug-and-Play. HID-gadget.
To start, switch the slider on the bottom panel to the position indicated by the icon USB (The green indicator should light up or start flashing, confirming the activity of the regime. USB-receiver, which is often stored in a special depression at the bottom of the mouse itself or in, and insert it into a free USB-port.
Windows, macOS or Linux will automatically detect the new device and install the necessary basic drivers. This process takes a few seconds. If the cursor does not appear on the screen immediately, try reconnecting the receiver to another port, preferably USB 2.0, since some USB 3.0 ports can interfere with the 2.4 GHz wireless signal.
☑️ Connection check USB
It's important to note that the signal range in this mode is up to 10 meters in open space, but metal surfaces, the housing of the system unit or other wireless devices can shield the signal. USB-extender.
Connection via Bluetooth 4.0
An alternative method of connection that frees up USB-You can use a mouse with tablets or ultrabooks without classic connectors, which is Bluetooth. To work in this mode, you need to move the slider switch on the bottom panel to the extreme position indicated by the Bluetooth symbol. The indicator on the body will often flash blue, which means the search mode and readiness for pairing.
On your computer or mobile device, open your Bluetooth settings and start searching for new devices. The list of devices available for connection should appear as Xiaomi Mouse 2 or similar. Click on it to initiate the pairing process. The system can request a code confirmation or simply notify you of a successful connection.
It should be borne in mind that when you first connect via Bluetooth, the system can automatically install additional drivers to expand the functionality, if they are available in the OS repositories. After successful pairing, the indicator on the mice will stop flashing and will light up only when you press the buttons, which indicates the connection stable.
⚠️ Note: When connecting via Bluetooth, make sure that the host device (PC or smartphone) has a wireless module enabled and it is visible to other devices.
Specifics of working with operating systems
The versatility of Xiaomi Wireless Mouse 2 is that it is compatible with different platforms. However, the behavior of the cursor and additional buttons may vary depending on the operating system installed. In Windows, all buttons, including side navigation, usually work by default for navigation "Back" and "Forward" in browsers and explorers.
MacOS users can also use basic features without installing software, but third-party software may be needed to reassign buttons or change scroll speed, as the native driver from Xiaomi for Mac may not be publicly available. In Linux distributions, the device is defined as a standard mouse that supports multimedia keys and a scroll wheel.
For mobile devices based on Android or iOS, the connection is carried out exclusively via Bluetooth. After pairing, a cursor will appear on the smartphone screen, which allows you to fully control the interface, which is especially convenient when connecting the phone to an external monitor or TV to create a workstation.
| Operating system | Type of connection | Need for drivers | Support for side buttons |
|---|---|---|---|
| Windows 10/11 | USB / Bluetooth | Automatically. | Complete. |
| macOS | USB / Bluetooth | Automatically. | Partial |
| Android | Bluetooth | No. | Depends on the app. |
| Linux (Ubuntu) | USB / Bluetooth | Automatically. | Complete. |
Setting up sensitivity and additional functions
One of the key features of the model is the ability to quickly change the sensitivity of the sensor. On the top panel, next to the scroll wheel, there is a DPI switch button. Pressing it cyclically changes the resolution of the sensor, which is displayed by changing the color or frequency of the indicator blinking (if provided by the model) or simply felt by the speed of the cursor.
Standard DPIs are typically 1,000 and 1,200 dpi, which is optimal for office work and web surfing. Higher resolution may be required for more accurate graphics or gaming, but this model is focused on energy efficiency and comfort of everyday use, not esports achievements.
The Secret to Quick DPI Shift
If you don't have the standard cursor speed, you can programmatically increase it in the operating system settings. In Windows, this is done through the mouse control panel, the pointer speed slider, which allows you to tailor even the basic sensor settings to the individual preferences of the user.
Diagnostics of problems and troubleshooting
Even reliable devices like the Xiaomi Wireless Mouse 2 can run into problems. The most common cause of failure is the discharge of batteries. If the cursor moves in jerks or disappears, replace the batteries first. A weak charge can also cause unstable Bluetooth connections.
Second spread