Modern peripherals from Xiaomi, such as Mi Portable Mouse or Mi Silent Mouse, are becoming increasingly popular due to their minimalist design and functionality. The main advantage of these gadgets is the ability to wirelessly connect, which eliminates unnecessary wires and allows you to use the laptop anywhere. However, despite the stated ease of use of Bluetooth technology, many users have difficulties with initial pairing, especially if you have not previously worked with such devices.
The connection process may seem confusing only at first glance, as some models require a specific sequence of actions to activate the search mode. It is important to understand that the correct setting the first time will ensure stable operation of the cursor and save battery life in the future. In this article, we will discuss in detail every step, from preparing the hardware to solving possible software conflicts in the operating system.
Before you get to the software part, you need to make sure your device is ready to go, which includes checking whether the battery is charging or installing new batteries, and the physical integrity of the mode switches. Wireless connection requires a clear signal, so any mechanical obstacles or discharged batteries can cause failure.
Preparing the Xiaomi mouse for pairing
The first and most important step is to put the manipulator in detection mode. Most Xiaomi models are equipped with a special switch on the bottom panel, which has three positions: off, 2.4 GHz mode (for example, for the device). USB-Adapter mode and Bluetooth mode. You need to move this slider to the position indicated by the Bluetooth icon. In some models, such as the Mi Silent Mouse, this mode is activated by prolonged pressing of a special button or a combination of buttons.
After switching, the indicator on the device body should start flashing blue or white, which signals the transition to mating mode. If the indicator does not light up, check the state of the battery compartment. Sometimes oxidation of contacts or improper polarity of the battery installation block the electronics. Make sure you use high-quality batteries, since cheap analogues may not give the necessary voltage to operate the radio module.
⚠️ Warning: If the indicator flashes too fast or burns constantly without going into search mode, try removing the battery on the device. 10-15 And then you put it back in, and it'll help you to reset the time errors of the controller.
It’s also important to note that some advanced models, such as the Mi Dual Mode Wireless Mouse, allow you to connect to two devices at once. To switch between them, you also need to hold a few seconds to activate the detection mode of the new device.
☑️ Checking the device's readiness
Bluetooth settings in the Windows operating system
Once the hardware is ready, you need to go to the software. On Windows 10 or Windows 11, the device search process is standardized, but has its own nuances. Open the Start menu and go to the Settings section, which is indicated by the gear. Next, select Devices or Bluetooth and Devices, depending on the version of your OS.
Make sure that the Bluetooth slider on your laptop is in the "On" position. If the module is off, the system will not be able to detect any external gadgets. Press the "Add Bluetooth or other device" button. In the window that opens, select the first item, "Bluetooth", which is designed for mice, keyboards, feathers and audio devices.
The system will start scanning the available space, and it should show up with devices called Mi Mouse, Mi Silent Mouse or just Xiaomi Mouse, and click on your model name. The pairing process usually takes a few seconds, after which a message will appear, "Device ready for use." PIN-Type 0000 or 1234, although this is rarely required for mice.
💡
If you have multiple identical names on your list, try connecting to each of them, and sometimes old records of previous connections remain in the cache and interfere with the correct operation.
It is worth noting that drivers for such devices are installed automatically thanks to standard HID protocols (Human Interface Device). However, if after connecting the cursor moves jerks or disappears, you may want to update the Bluetooth adapter drivers through the Device Manager.
Instructions for users of macOS and Linux
Apple MacBook owners can also easily use the peripherals from Xiaomi. To connect, open system settings and go to the Bluetooth section. Make sure Bluetooth is on and your Mac is visible to other devices. Put your mouse in pairing mode as described in the previous sections, and wait for the device to appear in the Other Devices list.
Once you click on the Connect button, the system can request confirmation or code input. Unlike Windows, macOS sometimes requires additional permission to use accessories, especially if it happens for the first time. Follow the instructions on the screen, and after a few seconds the cursor will become responsive.
For Linux users (Ubuntu, Fedora, Mint), the process should also be easy, although the interface may be different. In GNOME or KDE graphics, Bluetooth settings are usually in the system tray or in the main system settings. If the GUI can't see the mouse, you can use the terminal.
bluetoothctl
power on
scan onAfter the appearance MAC-Addresses of your mouse in the list of scanned devices, use the pair command [MAC-address] for pairing and connect [MAC-Address] for connection. This is a universal method that works even when the graphical interface fails.
Use of the USB-2.4 GHz adapter as an alternative
Not all Xiaomi models rely solely on Bluetooth. Many of them, including the Mi Portable Mouse, come with a compact version. USB-This method often provides a more stable connection and lower input lag, which is critical for designers or casual gamers.
To connect, it is enough to remove the adapter from the battery compartment (if it is hidden there) or find it in a box, and insert it into a free one. USB-The system automatically recognizes the device as a standard mouse, and the main advantage of this method is that there is no need to pair and configure the Bluetooth module.
However, if you are using USB-a hub or docking station, may cause interference, especially if nearby Wi-Fi devices. USB-extender to bring the receiver closer to the working surface, or switch to Bluetooth mode, which is less susceptible to interference from the operating surface USB 3.0 ports.
| Parameter | Bluetooth mode mode mode | USB 2.4 GHz mode |
|---|---|---|
| Delay (Latency) | Medium (10-20 ms) | Low (5-8 ms) |
| Energy consumption | Low. | Average. |
| Occupation of ports | No, he doesn't. | 1 USB port |
| Stability | Depends on the interference. | Tall. |
The choice between these two modes depends on your priorities. If you want maximum autonomy and port freedom, choose Bluetooth. USB-adapter.
Solving Common Connection Problems
Even if you follow all the instructions, you can have situations where the laptop doesn't see the mouse or the connection is constantly interrupted. One of the most common causes is the conflict of old profiles. If you previously connected that mouse to another computer or phone, it may automatically try to connect to the last known device, igniting your laptop.
In this case, you need to forget the device on all the gadgets where it was stored, and reset the mouse itself, and the problem may lie in the drivers of the laptop's Bluetooth adapter. Try to remove the device from Windows Device Manager and restart the computer so that the system installs the driver again.
⚠️ Attention: If the cursor moves chaoticly or "shaking," check the surface you're working on. Xiaomi's optical sensors may not work well on glossy, transparent or mirrored surfaces without a mat.
Another cause of failures can be energy saving. Windows sometimes turns off the Bluetooth module to save energy, which leads to a connection break. To fix this, go to the Bluetooth adapter properties in Device Manager, go to the Power Management tab and uncheck the "Allow this device to turn off."
Secret combination for resetting
Setting up sensitivity and additional functions
Although Xiaomi mice are known for their minimalism and lack of bulky software, some models support basic sensitivity setting (DPI). Changing the DPI allows you to speed up or slow down the cursor without changing the settings in the operating system, usually done by a combination of buttons or a special wheel.
For example, in the Mi Dual Mode Wireless Mouse, the DPI switch is done by pressing a button under the thumb. The light indicator will change color to signal the current sensitivity level: red (1000 DPI), green (1200 DPI) or blue (1600 DPI). For office work, the average is considered optimal, while for high-resolution (4K) monitors it is better to set the maximum value.
Also worth mentioning is the possibility of using the mouse as a presentation console. In some configurations and when installing additional (unofficial) utilities, side buttons can emulate slide switching. However, out of the box, they most often perform the functions of "back" and "forward" in the browser, which is very convenient for web surfing.
💡
The optimal DPI setting depends on your screen resolution: 1000-1200 DPI is enough for FullHD (1080p), and 1600 DPI is better for 4K monitors and higher.