Wireless peripherals have long since ceased to be a luxury and have become the standard of an ergonomic workplace. Xiaomi’s modern mice combine minimalist design, long battery life and a stable wireless connection. However, the initial configuration of such a gadget often raises questions among users who are used to wired analogues or USB-In this article, we'll go into detail about the pairing process so that you can get to work right away without any complications.
The main advantage of Bluetooth is to free up USB ports, which is especially important for owners of ultrabooks and tablets. The pairing technology allows you to connect the device at a distance of up to 10 meters without losing signal quality. It is important to understand that the procedure for activating the search mode may vary depending on the particular model, whether it is Mi Smart Mouse or the more advanced Mi Portable Mouse.
Before you start software-based settings, you need to make sure that the device is physically ready to go. Checking the battery or the battery level on the inside is the first and most critical step. If the indicator doesn't light up when you press the buttons, then further manipulation of the computer makes no sense, because the communication module simply won't start.
⚠️ Warning: Before starting the procedure, make sure that your computer is enabled with the Bluetooth module. On desktop PCs, there is often no built-in adapter, and you will need an external adapter to work. USB-whistle.
Preparation of equipment and activation of the coupling mode
The first stage of setup requires physical interaction with the device. Most Xiaomi models are equipped with a hidden mode switch or a special button to enter detection mode. Powering is only half the battle; the device must become visible to external scanners. This usually requires clamping a certain key combination or holding the wheel for a few seconds.
If you are using a model with USB-With the receiver included, remember that Bluetooth mode often runs in parallel or requires switching. Dual mode (2.4 GHz and Bluetooth) allows you to use a single mouse with different devices, but requires the correct activation of the desired protocol. Visually, the readiness to pair signals a rapidly flashing LED indicator.
💡
Keep the instructions handy or remember that for most Xiaomi models, you need to press the left, right and center buttons simultaneously for 3-5 seconds until the indicator flashes blue.
You should also pay attention to the type of batteries used. Aluminum batteries can have slightly lower capacity compared to alkaline counterparts, which in rare cases affects the signal power at the first start. Make sure that the contacts in the compartment are clean and not oxidized, especially if the device has been lying unused for a long time.
- 🔋 Check the orientation of the battery in the compartment according to the scheme on the body.
- 💡 Make sure the LED light responds to button presses.
- 📶 Activate the search mode by clamping the desired combination of buttons.
- 🔌 Take it away. USB-2.4 GHz receiver if you plan to use Bluetooth.
Interface in the Windows operating system
The connection process in Windows 10 and 11 is standardized, but has its own nuances in the menu interface. To start, you need to open the system settings through the Start menu or the Win + I key combination. In the window that opens, you should select the Devices or Bluetooth and Devices section, depending on the version of the operating system.
After you go to the corresponding menu, you need to activate the Bluetooth slider if it is turned off. System search will start scanning the surrounding space for available gadgets. In the list of detected devices, an entry should appear with the name Xiaomi Mouse or a specific model number. A click on this name will start the process of installing drivers.
☑️ Connection algorithm in Windows
The operating system will automatically load the necessary HID-drivers that provide basic button and wheel functionality. In rare cases, you may need to restart your computer if the device has identified an error. Once you pair successfully, the status will change to Connected, and the cursor will become responsive to movements.
| Action. | Windows 10 | Windows 11 |
|---|---|---|
| Opening the settings | Launch → A gear. | Start → Parameters |
| Section | Devices | Bluetooth and devices |
| Addendum | Big plus. | Add the device button |
| Type of device | Bluetooth | Bluetooth |
Setup in macOS and Linux
Users of the Apple ecosystem can also easily integrate the Xiaomi peripherals into their work. The process in macOS is as simple as possible and does not require installing additional software for basic work. Just go to System Settings through the Apple menu or dock panel and select the Bluetooth partition.
In Linux distributions (Ubuntu, Fedora, Mint), the procedure may require the adapter to be manually enabled via a system tray or terminal. In a GNOME or KDE GUI, you need to find a Bluetooth icon, turn it on and start a search. HID is supported by the Linux kernel natively, so the mouse should be defined as a standard input device.
Problems with right buttons in Linux
It’s worth noting that in macOS, the functionality of additional buttons can be limited without special software. Apple’s system limitations do not always allow you to reassign third-party keys with standard means.
⚠️ Warning: When connecting to a Mac, make sure that the trackpad settings do not activate gesture conflicts that can intercept cursor control.
Installation of drivers and additional software
While basic functionality is available immediately, it is recommended to use specialized software to unlock the full potential. Official drivers from Xiaomi are often bundled with the device or available on the manufacturer's website.
Programs like Xiaomi Mouse Tools allow you to change the cursor speed (DPI), adjust the assignment of side buttons and check the battery level. Without installing such software, the mouse will work in the standard mode specified by the manufacturer in the factory, this is especially important for gamers or designers who need accurate calibration.
It is important to download software only from trusted sources to avoid malicious code. System security is more important than additional features. The official site or open source GitHub repositories are the most reliable options for finding utilities.
- 🛠️ Download the installation file from the official resource.
- 💻 Launch the installer on behalf of the administrator.
- ⚙️ Adjust the sensor sensitivity and double click speed.
- 💾 Save the settings profile in the device memory (if supported).
Solving Common Connection Problems
Even if all instructions are followed, there can be technical complications. Driver conflicts are one of the most common reasons why a computer can't see a mouse. Windows Device Manager may display an unknown device or device with an exclamation mark, requiring an update or reinstallation of Bluetooth drivers.
Radio frequency from Wi-Fi routers, microwaves or other wireless devices can interrupt the connection. If the cursor moves in jerks or disappears, try to move the receiver (if you use dongle) away from the PC case or other radiation sources.
💡
If the mouse has stopped responding, replace the battery with a new one first, even if the old one seems to be working – a voltage drop often causes the connection to break before the indicator shows a discharge.
In some cases, a complete reset of Bluetooth settings on your computer helps. Deleting a device from a list of previously used ones and re-starting the search procedure often solves the problem of “hanged” connection status, and it is also worth checking the Bluetooth services on the system, making sure that they are running automatically.
Optimization of work and energy saving
To extend the battery life, it is important to adjust the power saving settings correctly. Xiaomi's mouse sleep mode is activated automatically after a period of inactivity. USB-port, preventing the system from turning off the device to save energy if it causes problems with waking up.
Using a mouse mat with a suitable surface also affects charge consumption: an optical sensor spends more energy trying to read the texture of a glass or glossy table. A quality mat provides stable positioning and reduces the load on the motion processing processor inside the device.
Regularly cleaning the sensor of dust and pile helps maintain accuracy and efficiency. Pollution can lead to erroneous movements, causing the mouse processor to work harder. Simple purging or wiping with soft cloth significantly improves response.
⚠️ Warning: Do not use aggressive chemicals to clean the optics and body, this can damage the plastic coating and sensor lens.