The integration of the Apple ecosystem with Xiaomi devices is often a question for users, especially when it comes to screen duplication. MacBook laptop owners are eager to get the maximum image quality on the big screen, whether for watching movies or holding presentations. Modern Xiaomi TVs running on Android TV or PatchWall offer ample opportunities for synchronization, but require the right setup.
There are several proven methods of connection, each with its own advantages depending on your needs.You can choose a wireless connection over Wi-Fi for convenience or give preference to the use of the Internet. HDMI-It is important to understand that native AirPlay support is not built into all Xiaomi TV models, so sometimes you need to install additional software.
In this article, we will take a look at all the available ways of connecting, from simple settings in the menu to the use of specialized utilities. You will learn how to set up a MacBook Pro or MacBook Air to work with Xiaomi Mi TV, and how to avoid common errors when syncing devices. Readiness of equipment and knowledge of the nuances of data protocols will help you create the perfect multimedia bundle.
Preparation of equipment and network
Before any manipulations, you need to make sure that both devices are in the same network conditions. For wireless connectivity, it is critical that your laptop and TV are connected to the same Wi-Fi network. If your router supports two frequency bands (2.4 GHz and 5 GHz), it is recommended to use the 5 GHz bandwidth to ensure higher bandwidth.
Check the software's relevance on both devices. On Xiaomi TV, go to the settings menu and find the About Device section, then select System Update. On MacBook, open System Settings and check for macOS updates. Outdated firmware versions may contain bugs that prevent devices from being detected by each other.
- 📶 Make sure that your router does not include customer isolation. AP, which blocks the interaction of devices within the network.
- 🔋 Connect your MacBook to a power source, as video streaming can consume battery power significantly.
- 📺 Turn off the energy-saving modes on the TV so that the screen does not go out during the demonstration.
⚠️ Note: If your router gives away two networks with the same name (SSID) For different frequencies, devices can automatically switch between them, which will cause a connection to break. For stable operation, it is better to temporarily combine networks or explicitly prescribe static networks. IP-address.
It's also worth checking if the device detection feature on the TV is enabled. Depending on the model and version of the MIUI TV, this option can be called different things: Wireless Display, Miracast or Broadcast. Without activation of this module, the TV will be invisible to external signal sources.
Wireless connection via AirPlay
The most convenient way for Apple owners to use AirPlay technology. Many modern Xiaomi TVs have built-in support for this protocol. To get started, you do not need to install anything if your TV model is in the Mi TV Stick series or newer Mi TV P1 and higher.
Activate the TV signal reception mode. In some cases, you need to start the Apple AirPlay or Wireless Display application from the list of installed applications on the Android TV home screen. Once you start, the confirmation code or the name of the device ready to pair will appear on the screen.
On a MacBook, click on the Control Point icon (two switches) in the menu bar. Select Screen Replay. In the list that appears, find the name of your Xiaomi TV. If the devices are on the same network, the connection will be established automatically.
💡
If the TV isn't on the list, try restarting the router. Sometimes the DNS cache blocks the detection of devices using the Bonjour protocol that AirPlay uses.
Once you've successfully connected, you can choose to work: Screen Replica (cloning) or Use as a separate display. The second option allows you to expand the workspace by dragging application windows to the big screen, which is especially convenient for working with documents or editing videos.
Use of third-party broadcasting applications
If your Xiaomi TV model doesn’t have built-in AirPlay support or isn’t running smoothly, third-party apps come to the rescue, with AirScreen, the leader in this area, emulating Apple’s Android protocols, available for download from the official Google Play Store on the TV.
Install the AirScreen app on your TV and run it. The program will automatically configure the necessary settings and prompt you to scan. QR-code or click on the link to install drivers if necessary. After you start, you will see a waiting screen with the device name, for example, AS-XiaomiTV-4K.
☑️ Set up AirScreen on Xiaomi
You can configure the flow parameters in detail in the app settings, you can change the resolution, frame rate, and even enable HDR support if the TV and the source support this standard, and this allows you to achieve color reproduction close to native.
| Parameter | Recommended value | Description |
|---|---|---|
| Permission | 1920x1080 or 4K | Depends on the TV model. |
| Bitreit | High-pitched | For better picture quality |
| Codec | H.264 / H.265 | Automatic choice |
| Sound. | AAC | Optimal for compatibility |
It's worth noting that using third-party software can introduce minimal latency when you output an image. This is not critical for watching videos, but it can be noticeable for dynamic games, and in such cases, it's better to consider wired connection options.
Wired connection via HDMI
To achieve maximum image quality and no delays, use a cable connection. Since modern MacBooks are equipped with Thunderbolt 3/4 or USB-C ports, you will need an appropriate adapter or dock with HDMI output.
Connect the HDMI cable to the TV to a free port (such as HDMI 1 or HDMI 2 (ARC)). Then connect the adapter to the MacBook. The TV automatically detects a new signal source and switches to it. If this does not happen, use the remote control and the Input or Source button for manual port selection.
Which cable to choose for 4K HDR?
On the macOS side, the system also recognizes the external display. You can control the output options through System Settings → Displays. You can change the resolution, refresh rates and color reproduction. For Xiaomi TVs, it is recommended to set the TV mode or Additional displays depending on the task.
⚠️ Note: When using long-term HDMI-Low quality cables (over 3 meters) may cause image artifacts or occasional signal loss. Use cables labeled High Speed or Premium High Speed.
Configure the display and sound parameters
After a successful connection, it is important to properly configure the output options so that the picture does not look stretched or, conversely, with black fields at the edges. On the MacBook in the Display menu, click the Additional Options button (or hold the Option key when you press the zoom button) to see the full list of available resolutions.
Often, by default, macOS chooses a mode that does not match the native resolution of the TV matrix. For Xiaomi models with a 4K UHD matrix, make sure that you choose a resolution of 3840 x 2160. Also check the refresh rate: 60 Hz is preferred for smooth interface and video.
💡
Correct color calibration and resolution are key to a comfortable viewing experience. Don't ignore zoom settings if the text on the screen looks blurry.
As for sound, macOS can by default continue to play audio through the laptop's built-in speakers. To change that, go to System Settings → Sound → Exit and select your Xiaomi TV or connected audio system from the list. This will allow you to use powerful TV speakers or a connected soundbar.
If the audio is played with a delay relative to the video (dissynchron), try changing the output format in advanced audio settings or reducing the audio quality in the settings of a particular application (for example, VLC or IINA).
Solving problems and mistakes
Despite the simplicity of the procedure, users may encounter a number of difficulties. One of the most common problems is that the TV does not see a MacBook in the list of AirPlay devices. 90% of the time, this is solved by checking the firewall on the Mac. Go to System Settings → Security and Security → Firewall and make sure that blocking incoming connections does not prevent detection services from working correctly.
Another common situation is that there is an image, but there is no sound. Check if the player apps have their own audio output installed, which can override system settings. Also try restarting the coreaudiod service through the Terminal, although this is extremely rare.
- 🔄 Rebooting both devices often solves problems with the freeze detection services.
- 📡 Make sure that the antivirus or VPN MacBooks don’t block local traffic.
- 🔌 When connecting, try another port. HDMI TV-wise.