How to connect Xiaomi light bulb to Alice: full instruction with photos and tips

Voice control of lighting via Alice from Yandex makes the smart home even more convenient — just say a command to turn on the light, change the color or brightness. But many users face difficulties when connecting Xiaomi lamps (including the Yeelight and Mi LED Smart Bulb brands) with the voice assistant. In this article, we will analyze all official and alternative ways of connecting, as well as typical errors that interfere with synchronization.

It is important to understand that not all Xiaomi lamps are directly compatible with Alice. For example, old models without support for the Mi Home Open API protocol or devices purchased outside of Russia may not appear in the list of available gadgets. We tested the current firmware in 2026 and collected working schemes for different scenarios – from basic settings to circumventing restrictions through third-party services.

What Xiaomi light bulbs support Alice?

Before buying or setting up, check your model's compatibility. Officially, Alice only works with devices that:

• 🔹 Supports Mi Home Open protocol API (This is usually described as “Working with voice assistants").
• 🔹 Linked to Russian Mi Home server (Chinese or European versions may not sync).
• 🔹 Have up-to-date firmware (outdated software versions often block integration).

Here is a list of proven models that are guaranteed to work with Alice (data as of June 2026):

⚠️ Attention: Lamps marked CN (For the Chinese market, it is often not synced with Alice, even if it supports Mi Home Open. API. Before buying, specify the region of the device from the seller.

Preparation: What to do before connecting

To avoid mistakes in the ligament, follow the preliminary steps:

Install the Mi Home app (version 6.5.400 or later)

Create a Xiaomi account and confirm your email/phone

Connect the lamp to a 2.4GHz Wi-Fi network (5GHz not supported!)

Update the lamp firmware in Mi Home (Updates section)

Add a lamp to the room in the Mi Home app (do not leave it in All devices")-->

Pay special attention to the Wi-Fi network:

• 📶 Xiaomi lamps only work with 2.4 GHz networks. If your router broadcasts in two bands (2.4 and 5 GHz) under the same name, divide them in the settings.
• 🔒 Turn it off. WPA3 In router settings, some lamp models don't support this protocol. WPA2-PSK.
• 🌍 If the lamp was previously connected to another region (e.g. China), reset it to factory settings: turn it on/off 5 times in a row.

⚠️ Note: If you use a Yandex station or column with Alice, make sure she and the lamp are on the same Wi-Fi network. Otherwise, voice commands will not work, even if the devices are tied to the same account.

💡

If the lamp flashes yellow after reset, it means that it is ready for a new setting, in which state it can be connected to the Mi Home for 3 minutes.

Method 1: Official connection via Mi Home and Yandex

This is the most reliable method that works for most compatible models.

1. Open the Mi Home app, go to Profile → Settings → Voice assistants.
2. Select Yandex and click "Connect." The system will redirect you to the browser for authorization in the Yandex account.
3. Once logged in, go back to Mi Home and select the lamps you want to sync with Alice.
4. Open the Yandex app (or the web version of iot.yandex.ru), go to Devices → Add a device and select Xiaomi from the list.
5. Confirm access to your Mi Home account and wait for the lamp to appear on the list, and now you can control it with your voice.

If the lamp does not appear in Yandex, check:

• 🔄 Update the page in the browser or restart the Yandex application.
• 📱 Make sure that the lamp is tied to the room (does not hang in "All devices").
• 🔌 Reconnect the lamp to the network: turn it off for 10 seconds, then turn it on again.

Method 2: Connect via Yandex Smart Home (alternative method)

If the official sync doesn’t work, try adding the lamp manually through the Yandex Smart Home:

1. Go to the website iot.yandex.ru and log in.
2. Click "Add device" → "Other device" → "Xiaomi".
3. Enter the username and password from the Mi Home account to which the lamp is attached.
4. Select the lamp from the list and save the settings.

This method often helps if:

• 🔄 The lamp is in Mi Home, but does not appear in the mobile application Yandex.
• 🌐 You use a European or Chinese version of the lamp (but with firmware that supports Open lighting). API).
• 🔄 Previous connection attempt ended with the error "Device is not responding".

⚠️ Note: After manual addition, the lamp may appear in Yandex as "Unknown device". To fix this, go to the device settings and select the correct type (for example, "Lamp Xiaomi").

💡

If the lamp is connected to Alice but does not respond to commands, check if access to the Mi Home Open API is blocked in the settings of the Xiaomi account (Security → Access Management section).

Method 3: Using Home Assistant for Incompatible Lamps

If your lamp is not officially supported (e.g. Yeelight older models or Chinese firmware devices), you can use Home Assistant as a middleman, a technique that requires technical skills but opens up voice control for any Xiaomi device.

Algorithm of settings:

1. Install Home Assistant on your computer or Raspberry Pi (instruction: official website).
2. Add Xiaomi Miio integration through the Configuration → Integrations menu.
3. Enter the device token (how to get: mihome.dev).
4. Configure Alice bundle through Yandex Smart Home by selecting the Home Assistant option when you add the device.

Advantages of this method:

• 🔧 It works with any Xiaomi lamp, even without official Open support. API.
• 🔄 Allows complex scenarios to be created (e.g., “If movement is + darkly → light up%").
• 📊 Provides access to advanced settings (color temperature, timers, device groups).

⚠️ Note: When using Home Assistant, the lamps will be controlled via the Xiaomi cloud, which can cause delays of up to 1-2 seconds. For instant response, configure local control (advanced configuration is required).

Common mistakes and their solutions

Even with the right setup, users are faced with problems, and here are the most common errors and ways to fix them:

If the lamp is connected but Alice doesn’t see it, try:

• 🔄 Untie and re-tire the lamp in Mi Home.
• 📱 Delete the cache of the Yandex application (on Android: Settings) → Annexes → Yandex → Memory. → Clear the cache).
• 🔌 Reboot the router and all smart devices.

💡

If the lamp stopped working with Alice after the firmware update, rolling back to the previous version of the software can help. Contact Xiaomi support and request a firmware file for this.

Voice commands for lamp control

Once you have successfully connected, you can use the following commands (examples for Yeelight Color):

• 💡 "Alice, turn on the light in the living room" - will turn on the lamp at the last brightness.
• 🎨 "Alice, make the light blue, change the color to blue. RGB-model).
• ☀️ "Alice, set the light to 50% warm, set the color temperature. 2700K and brightness 50%.
• 🔄 "Alice, turn off all lights in 10 minutes, the shutdown timer will start.

To ensure that the teams work correctly:

• 🏠 Name the lamp in Mi Home simply and unambiguously (e.g., "Bedroom Lamp" rather than "Light 1").
• 🗣️ Say the name of the room if there are several lamps (for example, “Alice, turn off the light in the kitchen").
• 🔄 If Alice doesn't understand the command, rephrase it (for example, instead of "make the light brighter" say "increase the brightness to 80%").

⚠️ Note: Commands with percentages of brightness (e.g., "set 30 percent") only work for lights with smooth adjustment. Budget models (e.g., Mi Mi). LED Basic may ignore such requests.

FAQ: Frequent questions about connectivity