Connecting Xiaomi Smart Kettle to the phone: full instructions with pictures and tips

Why Xiaomi’s Smart Teapot Needs a Phone Connection?

Xiaomi Smart Kettles (the Viomi V-KETTLE1, Mijia Smart Kettle Pro, and others) stand out among their peers not only for their stylish design, but also for the ability to remotely control via a smartphone. However, many users face difficulties when connecting for the first time: the app does not see the device, the kettle does not respond to commands, or the synchronization process breaks in half. In this article, we will analyze all the stages of connection, from preparing the phone to setting up voice control via Alice or Google Assistant.

The main advantages of a connected kettle are remote boiling, water temperature control (40°C to 100°C), usage history, and even integration into smart home scenarios (e.g., automatic alarm clocking). But to make it work, you need to set up the connection correctly — and there are pitfalls that the manufacturer does not mention.

Important: The instruction is relevant for all Xiaomi Smart Kettle models released after 2020, including versions with Matter support (for the Apple HomeKit ecosystem).If your kettle is older, check compatibility in the table below.

1. Preparing the phone and kettle for connection

Before syncing, make sure your smartphone and kettle meet the minimum requirements, which will save you 80% of the problems during the connection phase.

• 📱 Smartphone: Android 6.0+ or iOS 12.0+ The latest version of the Mi Home app (or Mi Fitness for older models) requires Bluetooth 4.2 enabled and permission to use the LAN.
• 🔌 Kettle: full charge (the indicator should burn green), located no further than 2 meters from the phone, in the first 5 minutes after switching on, it is in pairing mode (blinks blue).
• 🌐 Internet: stable Wi-Fi connection at 2.4 GHz (5 GHz not supported!) VPN Proxies and Proxies – They Block Xiaomi Servers.

Critical note: if the kettle was previously linked to another Mi Account, it should be reset to factory settings. To do this, hold the power button for 10 seconds until the indicator starts flashing red.

⚠️ Attention: on Huawei phones with EMUI 12+ Mi Home background activity may be blocked. Add the app to the Protected list in the battery settings before connecting.

2. Installation and configuration of the Mi Home app

The official Mi Home app (or Xiaomi Home in some regions) is the only way to connect the kettle to your phone.

• 🤖 Android: Google Play (avoid being used) APK From third-party sites – they may contain viruses).
• 🍎 iOS: App Store. For China, use Mi Home China (different servers).

After installation:

1. Sign up or sign in to an existing Xiaomi account (be sure to link email or phone number!).
2. Select your country (or region) in your profile settings – this determines the servers available.
3. Enable notifications for the app in your phone settings.

💡

If the app gives an error "Server is not available", try changing the region to Mainland China (VPN required) or reinstall Mi Home.

Sign in to your Xiaomi account|Select the region of Russia|Turn on Bluetooth and Wi-Fi|Shut down. VPN/proxy|Update the application to the latest version-->

3. Step-by-step instructions for connecting the kettle

Now, to the most critical stage, which is the interface of devices, follow the instructions strictly by the steps:

1. Activate the pairing mode on the kettle: press and hold the power button for 3 seconds until the indicator starts flashing blue (for Mijia Smart Kettle Pro - orange).
2. Open Mi Home and press + → Add the device in the upper right corner.
3. Select the category: Kitchen → Teapot (if the model is not in the list, select Other → Search Nearby).
4. Confirm the connection: when the kettle appears in the list, click on it and wait for the beep (short squeak).
5. Connect to Wi-Fi: Select your 2.4GHz network and enter a password. The teapot will reboot (the indicator will go out for 10 seconds).

If the error "Disabled to connect" appears in step 4, check:

• 🔄 Reboot the router and kettle (take out the plug for 30 seconds).
• 📶 Make sure your phone and kettle are connected to the same Wi-Fi network.
• 🛡️ In the router settings, turn off filtering MAC-Addresses and Firewall for Local Network.

4. Set up smart home notifications and scripts

Once connected successfully, the kettle will appear in the Mi Home main menu, and you can now configure:

• 🔔 Notifications: Enable notifications about boiling completion, low water level or overheating in Device Settings → Notifications.
• ⏱️ Timers: Programm automatic turn on on schedule (for example, for your wake-up).
• 🤖 Voice control: link the kettle to Alice (Yandex) or Google Assistant via the Integration menu.
• 🔄 Scenarios: Create a chain of actions, such as: If the alarm goes off → kettle and lamp".

For voice control, say:

• “Alice, turn on the kettle in the kitchen” (requires linking Xiaomi account to Yandex).
• "OK Google, put the kettle on the 90 degree boil."

💡

To work smart home scenarios, the kettle and other devices (lamps, sockets) must be connected to the same Mi Home account and be on the same local network.

⚠️ Note: If you are using Xiaomi Smart Kettle with Home Assistant, you will need manual integration via Mi Home Integration or HACS. Matter's official support is still unstable (as of June 2026).

5. Solving common problems

Even with the correct following of the instructions, errors can occur, and we have collected typical cases and ways to fix them:

If none of these methods worked, try:

1. Remove the kettle from Mi Home and add it again.
2. Reset the router to factory settings (especially if it’s Xiaomi Mi Router – sometimes locks its own devices).
3. Contact Xiaomi support via Profile → Feedback in the application by attaching an error log (how to get: Settings → About the program → Error Log).

6. Additional functions and hidden capabilities

Few people know, but Xiaomi Smart Kettle has more than just boiling water.

• 🌡️ Temperature Maintenance Mode: Automatic water heating to a preset temperature can be enabled in the device settings (e.g., 80)°C for green tea) every 30 minutes.
• 📊 Usage statistics: The Analytics menu shows how many times a day you boiled water and what temperatures you chose.
• 🔇 Quiet mode: turns off the sound signals (useful at night). Activates in Settings → Sounds.
• 🔋 Energy saving: If the kettle is idle for more than 12 hours, it automatically disconnects from Wi-Fi (but remains Bluetooth-controlled).

💡

To save energy, set the settings for the kettle to "Eco mode" and reduce the temperature maintenance time from 30 minutes to 15 minutes, which reduces consumption by 20%.

For models with Matter support (such as Xiaomi Smart Kettle 1S), integration with Apple HomeKit is available.

1. Update the kettle firmware to version 1.5.0+.
2. In Mi Home, go to Device Settings → Integration → Add to HomeKit.
3. Scan it. QR-code from the casing of the kettle in the Apple Home app.

7. Security and service

Xiaomi’s smart kettles come with a variety of protective mechanisms, but their effectiveness depends on proper operation:

• ⚡ Overheating protection: automatically turns off the kettle at temperatures above 105°C or if it is running for more than 30 consecutive minutes.
• 💧 Water level sensor: blocks the inclusion without water or at its level below the minimum (marked on the internal scale).
• 🔒 Children’s lock: Hold the 5-second switch to activate the mode (the kettle won’t respond to random taps).

For extension of service:

• Clean the scale every 2-3 months (use citric acid or special products for electric kettles).
• Do not turn on the kettle immediately after washing - wipe the case dry, especially the contacts on the stand.
• Avoid distilled water – it accelerates the corrosion of the heating element.

⚠️ Note: if the kettle has started to turn off through 1-2 minutes after switching on, this is a sign of a malfunction of the thermostat.Do not try to repair yourself - contact the service center (the warranty on Xiaomi Smart Kettle is 12 months).

FAQ: Answers to Frequent Questions