Xiaomi’s smart kettles (like the Viomi Smart Kettle or Mijia Electric Kettle) allow you to control water temperature, start heating remotely and integrate into the Mi Home ecosystem. However, connecting to an iPhone often raises questions: the app does not see the device, there are synchronization errors or Wi-Fi problems. In this article, we will discuss the step-by-step connection algorithm, the nuances of working with iOS and how to fix typical problems.
Xiaomi’s smart kettles are regionally dependent. If you purchased a device in China and use it in Russia or Europe, you may need to change your region to Mi Home. It’s also important to consider that the iPhone has limitations on the background of apps, which sometimes interferes with stable communication with the kettle. We tested the instructions on the Viomi V-KET01A and Mijia MJDKQ01QB models with iOS 17 — all the steps are relevant for 2026.
1.Preparation: What it takes to connect
Before you start synchronizing, make sure you have everything you need, and without proper preparation, the process can be delayed or fail.
Basic requirements:
- 📱 iPhone with iOS 14 or later (on older versions, Bluetooth Low Energy issues are possible).
- 🌐 Stable 2.4GHz Wi-Fi connection (Xiaomi smart kettles do not support 5GHz networks!).
- 🔋 Charged kettle (the indicator battery level should be at least 20%).
- 📲 Installed Mi Home app (you can download it from the App Store).
Important: If your kettle was previously connected to another Xiaomi account, reset to factory settings. To do this, hold the power button for 5-7 seconds until the indicator flashes red and blue.
2. Install and configure the Mi Home app on iPhone
The Mi Home app is the central control element for Xiaomi’s smart devices, and when configured correctly, it determines 80% of the success of the connection.
1. Registration of the account:
- Open Mi Home and select the region of Russia (or your country).If the kettle is bought in China but used in Europe, the later will need to change region to "Mainland China" for compatibility.
- Sign up via email or phone number, use real data, it will be necessary to restore access.
Application settings:
Go to Profile → Settings → Region and make sure the right server is selected.
Enable notifications for Mi Home in iOS settings: iPhone Settings → Mi Home → Notifications.
💡
If you have a “Server Unavailable” error when registering, try using the VPN with servers in China or Singapore, after successful registration VPN can be turned off.
Permit verification:
- Give Mi Home access to:
Bluetooth (for initial synchronization)
Locations (necessary for device search)
Notifications (to receive alerts about the readiness of the kettle).
3. Step-by-step connection of the kettle to Mi Home
Now, to the process of connection, follow the instructions carefully, because even one step can fail.
Connection algorithm:
- Put the kettle in the socket. Wait until the indicator starts to flash blue slowly (standby mode).
- Open Mi Home and press + → Add the device.
- Select the Kitchen → Teapot category (or enter the model name manually).
- Make sure your iPhone is connected to a 2.4GHz Wi-Fi network. Click Next.
- The app will suggest connecting to the teapot's temporary network. Go to the Wi-Fi settings on your iPhone and select a network with the name Xiaomi_XXXX.
- Return to Mi Home, the connection should start. If the process is frozen, restart the kettle (turn off / turn off the socket).
- After successful synchronization, the kettle will emit an audio signal, and its card will appear in the application.
Make sure Wi-Fi is running at 2.4 GHz |
Disable VPN (if used) |
Close background apps on iPhone|
Check that the kettle is flashing blue |
-->
If at the stage of connection to the temporary network Xiaomi_XXXX There is an error, try it:
- 🔄 Reboot router and kettle.
- 📵 Disable mobile data on iPhone (sometimes they conflict with Wi-Fi).
- 🛠️ Change the region in Mi Home to China (even if the teapot is the European version).
4.Setting the kettle after connecting
Once synchronized successfully, the kettle will appear in the Mi Home main menu, and you can now customize it to suit your needs:
Basic parameters:
- 🌡️ Heating temperature: select one of the preliminary values (40)°C, 60°C, 80°C, 100°C) or set your own.
- ⏱️ Timer: Program automatic heating for a specific time (e.g., to wake up).
- 🔔 Notifications: Enable alerts for completion of heating or low water levels.
- 🔄 Energy saving mode: the kettle will maintain a set temperature for 12 hours.
For voice-enabled models (such as the Viomi V-KET01A), you can integrate a kettle with Alice or Google Assistant.
- At Mi Home, go to the kettle settings.
- Select Voice Control. → Connect to Alice.
- Follow the instructions to sync with your Yandex account.
How to reset the settings of the kettle if it does not connect?
5. Typical errors and their solutions
Even if you follow the instructions accurately, you can have failures, and let's look at the most common problems and how to fix them.
| Mistake. | Possible cause | Decision |
|---|---|---|
| Teapot not found at Mi Home | Incompatible server region or old version of the application | Change the region to China or upgrade to Mi Home |
| Connection cuts by 99% | Weak Wi-Fi signal or conflict with other devices | Bring the kettle closer to the router or disconnect other gadgets from the network |
| The kettle is connected but does not respond to commands | Time synchronization or firmware error | Reboot the kettle and update the firmware in Mi Home |
| The app asks for firmware updates, but the process freezes | Unstable Internet connection | Connect your iPhone to another Wi-Fi network or use mobile internet |
⚠️ Note: If the kettle was previously linked to another Xiaomi account, the new owner will not be able to connect it without resetting. → My devices.
Another common problem is that the kettle plugs in, but it doesn't heat the water.
- 🔌 Failure of the socket (check the voltage).
- 🛡️ Activated lock from children (some models have a physical lock button).
- 📱 Firmware error (update the software via Mi Home).
6. Compatible with other Apple devices
Xiaomi’s smart kettles can interact not only with the iPhone, but also with other Apple gadgets.
1. Apple Watch:
Using the Mi Home app on iPhone, you can set up notifications about the status of the kettle, which will be duplicated on the Apple Watch.
- Open the Watch on your iPhone.
- Move to My watch. → Notifications → Mi Home.
- Enable the option of mirror reflection notifications from the iPhone.
HomePod and Siri:
Officially, Xiaomi kettles do not support HomeKit, but you can use a workaround via Shortcuts:
- Create a new shortcut in the Shortcuts app.
- Add the action Send HTTP-request.
- Indicate. API-address for the management of the kettle (can be found in the documentation for the model).
- Set up a voice command, such as, “Hey Siri, boil the kettle.”
⚠️ Attention: To work with API You need to have access tokens from your Xiaomi account, and you can get them through the Mi Home web version!
7. Firmware Update and Security
Regular updates to the kettle firmware not only add new features, but also close vulnerabilities. For example, in 2023, some models discovered an error that allowed them to remotely turn on the kettle without authorization. Xiaomi released a patch, but many users ignored it.
How to update firmware:
- Open the kettle card in Mi Home.
- Go to Settings → Update firmware.
- If a new version is available, click Update.
- Do not disconnect the kettle from the network until the process is complete (usually takes 3-5 minutes).
Security measures:
- 🔐 Use a complex password for your Xiaomi account (at least 12 characters).
- 🛡️ Enable two-factor authentication in your profile settings.
- 🌐 Do not connect the kettle to public Wi-Fi networks (such as in cafes or hotels).
- 📵 Disable remote access if you do not use control outside the home.
💡
Updating the firmware through Mi Home is the only official way. Don't use third-party firmware: it voids the warranty and can knock the kettle out.