Connecting Xiaomi Smart Teapot to Your Phone: A Complete Guide with Photos and Tips

Introduction: Why connect Xiaomi kettle to smartphone?

Xiaomi’s smart kettles are not just appliances, but full-fledged Mi Home devices that can integrate into your smart home. Connecting to your phone offers the possibility of remote control, water temperature adjustment, schedule creation, and even voice control via Alice or Google Assistant. But how do you do it right to avoid the typical mistakes?

In this article, we’ll look at all the synchronization methods, from basic Wi-Fi connectivity to fine-tuning via Mi Home and Mi Fit. Particular attention will be paid to Bluetooth 5.0-enabled models (like the Viomi Smart Kettle Pro) that require a separate pairing procedure, and if you’ve already tried to connect and you get a device not found or failed to add error, you’ll find solutions here.

Important: the instructions are relevant for all modern models Xiaomi/Viomi/Mijia (2020–2026 including Smartmi Kettle 1S, Viomi V-KETTLE1 Xiaomi Mi Smart Kettle Pro. For older versions (before) 2019 year) may require firmware update.

What Xiaomi kettles support phone connection?

Not all Xiaomi kettles are equipped with wireless communication modules, here is the current list of models with smartphone control support (2026):

• 🔹 Xiaomi Mi Smart Kettle Pro — Wi-Fi + Bluetooth, support for voice assistants, 1.7 liters, 1800 watts
• 🔹 Viomi Smart Kettle Pro – Wi-Fi 2.4 GHz, touchscreen display, 12 temperature modes
• 🔹 Smartmi Kettle 1S — Budget model with Wi-Fi, without Bluetooth, 1.5 liters
• 🔹 Viomi V-KETTLE1 — Premium series with stainless flask, control via Mi Home and Apple HomeKit
• 🔹 Xiaomi Mijia Electric Kettle (2023) – Bluetooth only, no Wi-Fi, limited functionality

⚠️ Attention: Models without Wi-Fi/Bluetooth (For example, Xiaomi Mi Kettle 2018 They can only be controlled by mechanical buttons on the case. Check the specifications of your model on the official website or in the documents.

If you're not sure about the model, look at the sticker on the bottom of the kettle -- it says the full name, V-KETTLE1 or SMARTMI KETTLE 1S.

Preparing for connection: what to do before synchronization

Before you start connecting, make sure that all the prerequisites are met, which will save time and avoid errors such as "failed to connect to the network."

Install the Mi Home app (version 6.0+)

Connect the kettle to the socket and turn it on

Make sure your phone is connected to 2.4GHz Wi-Fi

Turn it off. VPN and firewalls on the phone

Check the battery charge of the phone (minimum 30%)-->

The most common problem is Attempting to connect to a 5GHz Wi-Fi network. Xiaomi smart kettles only work with 2.4GHz networks (SSID), Separate them in the router settings. How to do it:

1. Open the router control panel (usually 192.168.0.1 or 192.168.1.1).
2. Go to the Wi-Fi section → Wireless network settings.
3. Activate the option “Separate 2.4 GHz and 5 GHz” or create a separate network for 2.4 GHz.
4. Save the settings and connect the phone to the 2.4 GHz network.

⚠️ Note: If you use a mesh system (e.g. Xiaomi Mi Wi-Fi Router) AX3600), Turn off the “Smart Connect” or “Band Steering” function – it automatically switches devices between frequencies, which prevents the kettle from connecting.

Step-by-step: how to connect a Xiaomi kettle to the phone via Mi Home

The main way to sync is through the official Mi Home app (available for Android and iOS). Follow the instructions carefully to avoid errors.

Step 1: Install and configure Mi Home

1. Download Mi Home from Google Play or App Store.

2. Sign up or sign in to your Xiaomi account (if not, create it via email or phone number).

3. Select the region "Russia" (or your country) - this is important for the correct operation of servers.

Step 2: Adding a kettle to the app

1. Press "Add device" (+) top-right.

2. Select category "Kitchen" → "Teapot".

3. Make sure the kettle is plugged into the socket and is in standby mode (the indicator flashes blue).

4. Follow the instructions on the screen: the application will prompt you to connect to the temporary network of the kettle (the name will be type). XIAOMI_KETTLE_XXXX).

Step 3: Connect to Wi-Fi

1. Once connected to the temporary network, return to Mi Home – the app will automatically find the kettle.

2. Select your 2.4GHz home Wi-Fi network and enter your password.

3. wait until the synchronization is completed (it can take up to 2 minutes).

⚠️ Note: If the error "I failed to connect to the network" appears at the stage of connecting to Wi-Fi, check:

• 📶 Correctness of the entered password (registrar is important!)
• 📵 Absence of Cyrillic symbols or special symbols in the network name (SSID)
• 🔄 Reboot the router and kettle (take out the plug for 10 seconds)

💡

If the kettle is not in the Mi Home, try resetting it to factory settings: hold the power button for 10 seconds until the indicator flashes red quickly.

Alternative ways to connect: Bluetooth and voice assistants

Not everyone knows, but some models (like the Mi Smart Kettle Pro) support direct Bluetooth connectivity, without the need for a Wi-Fi connection.

Connection via Bluetooth

1. Turn on Bluetooth on your phone.

2. Open Mi Home and press "Add Device" → "Bluetooth devices".

3. Select your kettle from the list (the name will contain Kettle or Viomi).

4. Confirm the pairing on the phone.

⚠️ Limitations of Bluetooth mode:

• 📱 Control is possible only within a radius of 10 meters from the kettle.
• 🔌 No access to cloud functions (scheduling, remote management).
• 🔄 When leaving Mi Home, the connection may be broken.

Management through voice assistants

Wi-Fi-enabled kettles can be integrated with Alice (Yandex), Google Assistant or Siri (via HomeKit for Viomi models).

1. Connect the kettle to Mi Home (as described above).

2. In the device settings in Mi Home, select Voice Assistant" → "Add to Alice./Google".

3. Follow the instructions for synchronizing accounts.

Examples of voice commands:

• 🎤 "Alice, turn on the kettle in the kitchen"
• 🎤 "Okay Google, heat the water to 80 degrees in the kettle"
• 🎤 "Siri, turn off the kettle in 5 minutes"

Customization of the kettle after connection: temperatures, schedules, notifications

Once synchronized successfully, you'll see advanced control functions, and let's look at the most useful ones.

Setting the exact heating temperature

Unlike regular kettles, Xiaomi smart models allow you to choose the temperature in 1 increments.°C (from 40)°C to 100°C. This is useful for:

• ☕ Preparation of green tea (70-80)°C)
• 🍼 Infant nutrition (37–40)°C)
• 🍵 Coffee brewing in French press (92–96)°C)

How to set up:

1. Open the kettle at Mi Home.

2. Go to the Temperature tab.

3. Select the desired value or save the frequently used modes in the "Favorites".

Scheduling

The Schedule allows you to automate water heating, for example, you can configure:

• ⏰ Heat by 7:00 (to make sure the water is ready to wake up)
• 🍵 Evening mode at 40°C for herbal tea before bedtime
• 🔄 Periodic boiling every 4 hours (for disinfection)

⚠️ Note: When setting your schedule, keep in mind that the kettle must be plugged into the socket and connected to Wi-Fi. If the power is turned off, the schedule will reset.

Notification and security

In the settings of the kettle, you can activate alerts:

💡

Use the "Eco Mode" function in the settings of the kettle - it automatically turns off heating when you reach temperature, saving electricity up to 15%.

Solving problems: The kettle doesn't connect to the phone

Even with the right actions, there can be mistakes, and let's look at the most common ones and how to fix them.

Error: "Device not found" in Mi Home

Causes and solutions:

• 📵 The kettle is not in pairing mode → Hold the power button for 5 seconds until the indicator starts flashing blue.
• 📶 Phone connected to 5 GHz Wi-Fi → Switch to 2.4 GHz (see Preparation section").
• 🔌 The kettle is not plugged in. → Check the power (the indicator should burn).
• 📱 An outdated version of Mi Home → Update the app in the store.

Error: “I was unable to connect to the network”

Most often associated with router settings.

• 🔒 Wi-Fi password contains Cyrillic or special characters → Change the password to Latin.
• 🔄 Mode "Only for known devices" is enabled" (MAC-filtering) → Turn it off or add it. MAC-kettle-dress.
• 📡 Weak Wi-Fi signal → Bring the kettle closer to the router.

The kettle is connected but does not respond to commands

Possible causes:

• 🌐 Problems with Xiaomi servers → Check the status at status.mi.com.
• 📱 Cash app Mi Home → Clear the cache in the phone settings.
• 🔄 Device locked. → Go to Mi Home. → Profile → Devices → Unlock.

If nothing helps, reset the kettle:

1. Turn the kettle off the socket.
2. Press the power button and hold for 15 seconds.
3. Connect to the socket - the indicator should flash red.
4. Repeat the connection procedure from scratch.

Operational tips: how to extend the life of a smart kettle

Xiaomi’s smart kettles are designed to last but require proper care. Here are the tips from service centers:

Cleaning and maintenance

• 🧽 Clean the scale every 2-3 months (use citric acid or special products).
• 🚫 Do not use abrasive sponges – they scratch the inner covering.
• 💧 After each use, drain the remaining water and dry the kettle with the lid open.

Energy conservation

• ⚡ Turn off the kettle if you do not use it for more than a day.
• 🔄 Use the Eco-mode function to automatically shut down.
• 📱 Set up a schedule so that the kettle does not work in vain (for example, at night).

Firmware update

Regular updates improve stability and add new features.

1. Open the kettle at Mi Home.

2. Go to "Settings" → Firmware update".

3. If a new version is available, click "Update" and wait until it is completed (don't unplug the kettle from the net!).

⚠️ Warning: If the kettle is disconnected during the upgrade, it may stop turning on.

💡

To keep the kettle warmer longer, before heating add 1 teaspoon of salt to the water - this will increase heat capacity and reduce heat loss.

FAQ: Answers to Frequent Questions